qmk · drashna · Sep 21, 2019 · Sep 19, 2019
diff --git a/docs/flashing.md b/docs/flashing.md
@@ -10,11 +10,17 @@ Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by
 
 To ensure compatibility with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = atmel-dfu
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+```
 
 Compatible flashers:
 
@@ -64,11 +70,17 @@ Arduino boards and their clones use the [Caterina bootloader](https://github.com
 
 To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = caterina
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+```
 
 Compatible flashers:
 
@@ -100,11 +112,17 @@ Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on al
 
 To ensure compatibility with the Halfkay bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = halfkay
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+```
 
 Compatible flashers:
 
@@ -125,11 +143,17 @@ USBasploader is a bootloader developed by matrixstorm. It is used in some non-US
 
 To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`:
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = USBasp
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+```
 
 Compatible flashers:
 
@@ -150,11 +174,17 @@ BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requ
 
 To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-    #     different sizes, comment this out, and the correct address will be loaded
-    #     automatically (+60). See bootloader.mk for all options.
-    BOOTLOADER = bootloadHID
+```make
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+```
 
 Compatible flashers:
 

diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk
@@ -15,18 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
 # build options
@@ -38,11 +35,7 @@ COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
 RGBLIGHT_CUSTOM_DRIVER = yes
-NO_UART = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 SRC += i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk
@@ -15,19 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
 # build options
@@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/canoe/rules.mk b/keyboards/canoe/rules.mk
@@ -15,19 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
 # build options
@@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk
@@ -1,61 +1,19 @@
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
+# Processor frequency
 F_CPU = 16000000
 
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-#
-# This uses usbaspbootloader
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-
 # Flash program via avrdude, but default command is not suitable.
 # You can use plaid:default:program
 PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex
@@ -84,8 +42,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
 LAYOUTS = 65_ansi
diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk
@@ -15,19 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
 # build options
@@ -44,6 +40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/eve/meteor/rules.mk b/keyboards/eve/meteor/rules.mk
@@ -16,10 +16,14 @@
 # MCU name
 MCU = atmega32a
 
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = bootloadHID
 
 # build options