Skip to content

Docker image for CUPS intended as an AirPrint relay on Synology DSM

License

Notifications You must be signed in to change notification settings

quadportnick/docker-cups-airprint

Repository files navigation

znetwork/cups-avahi-airprint docker-image

Working on Synology DSM 7 (!!!) and AMD64

Fork from quadportnick/docker-cups-airprint and chuckcharlie/docker-cups-airprint

This Ubuntu-based Docker image runs a CUPS instance that is meant as an AirPrint relay for printers that are already on the network but not AirPrint capable.

  • Included drivers HP, Samsung, Canon, Xerox, etc.

Easy run command (use username and password: admin/admin):

docker run --name airprint --restart unless-stopped --net host znetwork/synology-airprint:latest

Before run docker conteiner on DSM7 Synology run this commands in ssh terminal:

  • sudo synosystemctl stop cupsd
  • sudo synosystemctl stop cups-lpd
  • sudo synosystemctl stop cups-service-handler
  • sudo synosystemctl disable cupsd
  • sudo synosystemctl disable cups-lpd
  • sudo synosystemctl disable cups-service-handler

Add and setup printer:

  • CUPS will be configurable at http://[host ip]:631 using the CUPSADMIN/CUPSPASSWORD.
  • Make sure you select Share This Printer when configuring the printer in CUPS.
  • After configuring your printer, you need to close the web browser for at least 60 seconds. CUPS will not write the config files until it detects the connection is closed for as long as a minute.

After setup and testing AirPrint, you can back run on services. (maybe you will need restart nas)

  • sudo synosystemctl start cupsd
  • sudo synosystemctl start cups-lpd
  • sudo synosystemctl start cups-service-handler
  • sudo synosystemctl anable cupsd
  • sudo synosystemctl anable cups-lpd
  • sudo synosystemctl anable cups-service-handler

Manual Configuration

Volumes:

  • /config: where the persistent printer configs will be stored
  • /services: where the Avahi service files will be generated

Variables:

  • CUPSADMIN: the CUPS admin user you want created - default is admin if unspecified
  • CUPSPASSWORD: the password for the CUPS admin user - default is admin username if unspecified

Ports/Network:

  • Must be run on host network. This is required to support multicasting which is needed for Airprint.

Example run env command:

docker run --name cups --restart unless-stopped  --net host\
  -v <your services dir>:/services \
  -v <your config dir>:/config \
  -e CUPSADMIN="<username>" \
  -e CUPSPASSWORD="<password>" \
  znetwork/cups-avahi-airprint:latest

About

Docker image for CUPS intended as an AirPrint relay on Synology DSM

Resources

License

Stars

Watchers

Forks

Packages

No packages published