Missing IPSEC modules in raspbian kernel #86

ovacikar · 2012-08-16T12:42:44Z

I am unable to establish ipsec/psk session ,

fails with ERROR: netlink response for Add SA xxxyyyzzz included errno 93: Protocol not supported

Found another forum post stating it is missing a module but does not specify which one:

http://www.raspberrypi.org/phpBB3/viewtopic.php?f=36&t=12948

Please add all necessary modules for IPSEC to work

ipsec verify output : (I tried every possible sysctl command to fix the ICP forwarding , but they are still there

Checking for IPsec support in kernel [OK]
SAref kernel support [N/A]
NETKEY: Testing XFRM related proc values [FAILED]

Please disable /proc/sys/net/ipv4/conf/*/send_redirects
or NETKEY will cause the sending of bogus ICMP redirects!

[FAILED]

Please disable /proc/sys/net/ipv4/conf/*/accept_redirects
or NETKEY will accept bogus ICMP redirects!

[OK]

Checking that pluto is running [OK]
Pluto listening for IKE on udp 500 [OK]
Pluto listening for NAT-T on udp 4500 [OK]
Two or more interfaces found, checking IP forwarding [OK]
Checking NAT and MASQUERADEing [OK]
Checking for 'ip' command [OK]
Checking /bin/sh is not /bin/dash [WARNING]
Checking for 'iptables' command [OK]
Opportunistic Encryption Support [DISABLED]

The text was updated successfully, but these errors were encountered:

popcornmix · 2012-08-16T13:38:05Z

You'll need to find the config options required. Build a working kernel, and run
make ARCH=arm savedefconfig
and report the output of:
diff arch/arm/configs/bcmrpi_defconfig defconfig

ovacikar · 2012-08-16T14:55:01Z

The missing modules should be included by default. Can this get assigned to maintainer of kernel or openswan package ?
I do not have the resource to compile a kernel on rpi

ovacikar · 2012-08-18T02:13:28Z

the list of required modules are already listed here

http://wiki.strongswan.org/projects/strongswan/wiki/KernelModules

popcornmix · 2012-09-03T23:58:45Z

IPSEC modeules are added.

popcornmix · 2012-09-09T12:58:26Z

Closing as this option is added. Please reopen if there is a problem.

I can reliably reproduce the following panic by simply setting an audit rule on a recent 3.5.0+ kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffff810d1250>] audit_copy_inode+0x10/0x90 PGD 7acd9067 PUD 7b8fb067 PMD 0 Oops: 0000 [#86] SMP Modules linked in: nfs nfs_acl auth_rpcgss fscache lockd sunrpc tpm_bios btrfs zlib_deflate libcrc32c kvm_amd kvm joydev virtio_net pcspkr i2c_piix4 floppy virtio_balloon microcode virtio_blk cirrus drm_kms_helper ttm drm i2c_core [last unloaded: scsi_wait_scan] CPU 0 Pid: 1286, comm: abrt-dump-oops Tainted: G D 3.5.0+ #1 Bochs Bochs RIP: 0010:[<ffffffff810d1250>] [<ffffffff810d1250>] audit_copy_inode+0x10/0x90 RSP: 0018:ffff88007aebfc38 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88003692d860 RCX: 00000000000038c4 RDX: 0000000000000000 RSI: ffff88006baf5d80 RDI: ffff88003692d860 RBP: ffff88007aebfc68 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffff880036d30f00 R14: ffff88006baf5d80 R15: ffff88003692d800 FS: 00007f7562634740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 000000003643d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process abrt-dump-oops (pid: 1286, threadinfo ffff88007aebe000, task ffff880079614530) Stack: ffff88007aebfdf8 ffff88007aebff28 ffff88007aebfc98 ffffffff81211358 ffff88003692d860 0000000000000000 ffff88007aebfcc8 ffffffff810d4968 ffff88007aebfcc8 ffff8800000038c4 0000000000000000 0000000000000000 Call Trace: [<ffffffff81211358>] ? ext4_lookup+0xe8/0x160 [<ffffffff810d4968>] __audit_inode+0x118/0x2d0 [<ffffffff811955a9>] do_last+0x999/0xe80 [<ffffffff81191fe8>] ? inode_permission+0x18/0x50 [<ffffffff81171efa>] ? kmem_cache_alloc_trace+0x11a/0x130 [<ffffffff81195b4a>] path_openat+0xba/0x420 [<ffffffff81196111>] do_filp_open+0x41/0xa0 [<ffffffff811a24bd>] ? alloc_fd+0x4d/0x120 [<ffffffff811855cd>] do_sys_open+0xed/0x1c0 [<ffffffff810d40cc>] ? __audit_syscall_entry+0xcc/0x300 [<ffffffff811856c1>] sys_open+0x21/0x30 [<ffffffff81611ca9>] system_call_fastpath+0x16/0x1b RSP <ffff88007aebfc38> CR2: 0000000000000040 The problem is that do_last is passing a negative dentry to audit_inode. The comments on lookup_open note that it can pass back a negative dentry if O_CREAT is not set. This patch fixes the oops, but I'm not clear on whether there's a better approach. Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

emilhugo · 2012-10-23T20:59:56Z

which public available kernel level includes the IPSEC modules for OpenSwan?
ipsec verify on kernel 3.2.27+ still print:
Linux Openswan U2.6.37/K(no kernel code presently loaded)
Checking for IPsec support in kernel [FAILED]

In prima2, some functions of checking DT is registered in initcall level. If it doesn't match the compatible name of sirf, kernel will panic. It blocks the usage of multiplatform on other verndor. The error message is in below. Knic - not syncing: unable to find compatible pwrc node in dtb CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc3-00006-gd7f26ea-dirty #86 [<c0013adc>] (unwind_backtrace+0x0/0xf8) from [<c0011430>] (show_stack+0x10/0x1) [<c0011430>] (show_stack+0x10/0x14) from [<c026f724>] (panic+0x90/0x1e8) [<c026f724>] (panic+0x90/0x1e8) from [<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x) [<c03267fc>] (sirfsoc_of_pwrc_init+0x24/0x58) from [<c0320864>] (do_one_initcal) [<c0320864>] (do_one_initcall+0x90/0x150) from [<c0320a20>] (kernel_init_freeab) [<c0320a20>] (kernel_init_freeable+0xfc/0x1c4) from [<c026b9e8>] (kernel_init+0) [<c026b9e8>] (kernel_init+0x8/0xe4) from [<c000e158>] (ret_from_fork+0x14/0x3c) Signen-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>

commit 401507d upstream. Commit ff7ee93 ("cgroup/kmemleak: Annotate alloc_page() for cgroup allocations") introduces kmemleak_alloc() for alloc_page_cgroup(), but corresponding kmemleak_free() is missing, which makes kmemleak be wrongly disabled after memory offlining. Log is pasted at the end of this commit message. This patch add kmemleak_free() into free_page_cgroup(). During page offlining, this patch removes corresponding entries in kmemleak rbtree. After that, the freed memory can be allocated again by other subsystems without killing kmemleak. bash # for x in 1 2 3 4; do echo offline > /sys/devices/system/memory/memory$x/state ; sleep 1; done ; dmesg | grep leak Offlined Pages 32768 kmemleak: Cannot insert 0xffff880016969000 into the object search tree (overlaps existing) CPU: 0 PID: 412 Comm: sleep Not tainted 3.17.0-rc5+ #86 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x46/0x58 create_object+0x266/0x2c0 kmemleak_alloc+0x26/0x50 kmem_cache_alloc+0xd3/0x160 __sigqueue_alloc+0x49/0xd0 __send_signal+0xcb/0x410 send_signal+0x45/0x90 __group_send_sig_info+0x13/0x20 do_notify_parent+0x1bb/0x260 do_exit+0x767/0xa40 do_group_exit+0x44/0xa0 SyS_exit_group+0x17/0x20 system_call_fastpath+0x16/0x1b kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff880016900000 (size 524288): kmemleak: comm "swapper/0", pid 0, jiffies 4294667296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: log_early+0x63/0x77 kmemleak_alloc+0x4b/0x50 init_section_page_cgroup+0x7f/0xf5 page_cgroup_init+0xc5/0xd0 start_kernel+0x333/0x408 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf5/0xfc Fixes: ff7ee93 (cgroup/kmemleak: Annotate alloc_page() for cgroup allocations) Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 401507d upstream. Commit ff7ee93 ("cgroup/kmemleak: Annotate alloc_page() for cgroup allocations") introduces kmemleak_alloc() for alloc_page_cgroup(), but corresponding kmemleak_free() is missing, which makes kmemleak be wrongly disabled after memory offlining. Log is pasted at the end of this commit message. This patch add kmemleak_free() into free_page_cgroup(). During page offlining, this patch removes corresponding entries in kmemleak rbtree. After that, the freed memory can be allocated again by other subsystems without killing kmemleak. bash # for x in 1 2 3 4; do echo offline > /sys/devices/system/memory/memory$x/state ; sleep 1; done ; dmesg | grep leak Offlined Pages 32768 kmemleak: Cannot insert 0xffff880016969000 into the object search tree (overlaps existing) CPU: 0 PID: 412 Comm: sleep Not tainted 3.17.0-rc5+ #86 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x46/0x58 create_object+0x266/0x2c0 kmemleak_alloc+0x26/0x50 kmem_cache_alloc+0xd3/0x160 __sigqueue_alloc+0x49/0xd0 __send_signal+0xcb/0x410 send_signal+0x45/0x90 __group_send_sig_info+0x13/0x20 do_notify_parent+0x1bb/0x260 do_exit+0x767/0xa40 do_group_exit+0x44/0xa0 SyS_exit_group+0x17/0x20 system_call_fastpath+0x16/0x1b kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff880016900000 (size 524288): kmemleak: comm "swapper/0", pid 0, jiffies 4294667296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: log_early+0x63/0x77 kmemleak_alloc+0x4b/0x50 init_section_page_cgroup+0x7f/0xf5 page_cgroup_init+0xc5/0xd0 start_kernel+0x333/0x408 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf5/0xfc Fixes: ff7ee93 (cgroup/kmemleak: Annotate alloc_page() for cgroup allocations) Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>

commit 401507d upstream. Commit ff7ee93 ("cgroup/kmemleak: Annotate alloc_page() for cgroup allocations") introduces kmemleak_alloc() for alloc_page_cgroup(), but corresponding kmemleak_free() is missing, which makes kmemleak be wrongly disabled after memory offlining. Log is pasted at the end of this commit message. This patch add kmemleak_free() into free_page_cgroup(). During page offlining, this patch removes corresponding entries in kmemleak rbtree. After that, the freed memory can be allocated again by other subsystems without killing kmemleak. bash # for x in 1 2 3 4; do echo offline > /sys/devices/system/memory/memory$x/state ; sleep 1; done ; dmesg | grep leak Offlined Pages 32768 kmemleak: Cannot insert 0xffff880016969000 into the object search tree (overlaps existing) CPU: 0 PID: 412 Comm: sleep Not tainted 3.17.0-rc5+ #86 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x46/0x58 create_object+0x266/0x2c0 kmemleak_alloc+0x26/0x50 kmem_cache_alloc+0xd3/0x160 __sigqueue_alloc+0x49/0xd0 __send_signal+0xcb/0x410 send_signal+0x45/0x90 __group_send_sig_info+0x13/0x20 do_notify_parent+0x1bb/0x260 do_exit+0x767/0xa40 do_group_exit+0x44/0xa0 SyS_exit_group+0x17/0x20 system_call_fastpath+0x16/0x1b kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff880016900000 (size 524288): kmemleak: comm "swapper/0", pid 0, jiffies 4294667296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: log_early+0x63/0x77 kmemleak_alloc+0x4b/0x50 init_section_page_cgroup+0x7f/0xf5 page_cgroup_init+0xc5/0xd0 start_kernel+0x333/0x408 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf5/0xfc Fixes: ff7ee93 (cgroup/kmemleak: Annotate alloc_page() for cgroup allocations) Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes raspberrypi#86

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

commit c14f8a4 upstream. This patch fixes an issue that the extcon_set_cable_state_() is possible to cause "BUG: scheduling while atomic" because this driver calls extcon_set_cable_state_() in the interrupt handler and mutex_lock() is possible to be called by like the following call trace. So, this patch adds a workqueue function to resolve this issue. [ 9.706504] BUG: scheduling while atomic: systemd-journal/25893/0x00010303 [ 9.714569] Modules linked in: [ 9.717629] CPU: 0 PID: 25893 Comm: systemd-journal Not tainted 4.7.0-rc4+ raspberrypi#86 [ 9.724844] Hardware name: Renesas Salvator-X board based on r8a7795 (DT) [ 9.731624] Call trace: [ 9.734077] [<ffff0000080889f0>] dump_backtrace+0x0/0x1a8 [ 9.739470] [<ffff000008088bac>] show_stack+0x14/0x20 [ 9.744520] [<ffff000008348ab4>] dump_stack+0x94/0xb8 [ 9.749568] [<ffff0000080da18c>] __schedule_bug+0x44/0x58 [ 9.754966] [<ffff0000087c6394>] __schedule+0x4e4/0x598 [ 9.760185] [<ffff0000087c6484>] schedule+0x3c/0xa8 [ 9.765057] [<ffff0000087c6928>] schedule_preempt_disabled+0x20/0x38 [ 9.771408] [<ffff0000080f20dc>] mutex_optimistic_spin+0x18c/0x1d0 [ 9.777583] [<ffff0000087c7ef0>] __mutex_lock_slowpath+0x38/0x140 [ 9.783669] [<ffff0000087c803c>] mutex_lock+0x44/0x60 [ 9.788717] [<ffff00000834ca48>] kobject_uevent_env+0x250/0x500 [ 9.794634] [<ffff0000086ae8c0>] extcon_update_state+0x220/0x298 [ 9.800634] [<ffff0000086ae9d8>] extcon_set_cable_state_+0x78/0x88 [ 9.806812] [<ffff000008376004>] rcar_gen3_device_recognition+0x5c/0xe0 [ 9.813420] [<ffff0000083761bc>] rcar_gen3_phy_usb2_irq+0x3c/0x48 [ 9.819509] [<ffff0000080fae94>] handle_irq_event_percpu+0x94/0x140 [ 9.825769] [<ffff0000080faf88>] handle_irq_event+0x48/0x78 [ 9.831334] [<ffff0000080fe620>] handle_fasteoi_irq+0xb8/0x1b0 [ 9.837162] [<ffff0000080fa3c4>] generic_handle_irq+0x24/0x38 [ 9.842900] [<ffff0000080fa6fc>] __handle_domain_irq+0x5c/0xb8 [ 9.848727] [<ffff000008081520>] gic_handle_irq+0x58/0xb0 Reported-by: Simon Horman <horms@verge.net.au> Fixes: 2b38543 ("phy: rcar-gen3-usb2: add extcon support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

Signed-off-by: Phil Elwell <phil@raspberrypi.org> suppress spurious messages Add #if for 3.14 kernel change (#87) Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86 Set dev_type to wlan Fixes #23 Tentatively added support for more 8188CUS based devices. Add support for more 8188CUS and 8192CUS devices Add ProductId for the Netgear N150 - WNA1000M Fixes CONFIG_CONCURRENT_MODE CONFIG_MULTI_VIR_IFACES Fixes compatibility with 3.13 Enables warning in the compiler and fixes some issues, reference => https://github.com/diederikdehaas/rtl8812AU Starts device in station mode instead of monitor, fixes NetworkManager issues Enable cfg80211 support Fix cfg80211 for kernel >= 4.7 Fixes rtl8192cu for kernel >= 4.8 rtl8192: Fixup build fixup: rtl8192cu fixes from milhouse rtl8192: switch to netdev->priv_destructor() When trying to build from the rpi-4.11.y branch, I'm getting the following error : drivers/net/wireless/realtek/rtl8192cu/os_dep/linux/ioctl_cfg80211.c:3464:10: error: 'struct net_device' has no member named 'destructor' It seems to occur since this upstream commit : torvalds/linux@cf124db [...] netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Signed-off-by: Bilal Amarni <bilal.amarni@gmail.com> ARM64: Fix build break for RTL8187/RTL8192CU wifi These drivers use an ASM function from the base system to compute the ipv6 checksum. These functions are not available on ARM64, probably because nobody has bother to write them. The base system does have a generic "C" version, so a simple fix is to include the header to use the generic version on ARM64 only. A longer term solution would be to submit the necessary ASM function to the upstream source. With this change, these drivers now compile without any errors on ARM64. Signed-off-by: Michael Zoran <mzoran@crowfest.net>

commit d0ee879 upstream. [root@localhost ~]# ./liburing/test/link QEMU Standard PC report that: [ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622f1d2-dirty #86 [ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work [ 29.379929] Call Trace: [ 29.379953] dump_stack+0xa9/0x10e [ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.379986] print_address_description.cold.6+0x9/0x317 [ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380026] __kasan_report.cold.7+0x1a/0x34 [ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380061] kasan_report+0xe/0x12 [ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380104] ? io_sq_thread+0xaf0/0xaf0 [ 29.380152] process_one_work+0xb59/0x19e0 [ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [ 29.380221] worker_thread+0x8c/0xf40 [ 29.380248] ? __kthread_parkme+0xab/0x110 [ 29.380265] ? process_one_work+0x19e0/0x19e0 [ 29.380278] kthread+0x30b/0x3d0 [ 29.380292] ? kthread_create_on_node+0xe0/0xe0 [ 29.380311] ret_from_fork+0x3a/0x50 [ 29.380635] Allocated by task 209: [ 29.381255] save_stack+0x19/0x80 [ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 29.381279] kmem_cache_alloc+0xc0/0x240 [ 29.381289] io_submit_sqe+0x11bc/0x1c70 [ 29.381300] io_ring_submit+0x174/0x3c0 [ 29.381311] __x64_sys_io_uring_enter+0x601/0x780 [ 29.381322] do_syscall_64+0x9f/0x4d0 [ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.381633] Freed by task 84: [ 29.382186] save_stack+0x19/0x80 [ 29.382198] __kasan_slab_free+0x11d/0x160 [ 29.382210] kmem_cache_free+0x8c/0x2f0 [ 29.382220] io_put_req+0x22/0x30 [ 29.382230] io_sq_wq_submit_work+0x28b/0xe90 [ 29.382241] process_one_work+0xb59/0x19e0 [ 29.382251] worker_thread+0x8c/0xf40 [ 29.382262] kthread+0x30b/0x3d0 [ 29.382272] ret_from_fork+0x3a/0x50 [ 29.382569] The buggy address belongs to the object at ffff888067172140 which belongs to the cache io_kiocb of size 224 [ 29.384692] The buggy address is located 120 bytes inside of 224-byte region [ffff888067172140, ffff888067172220) [ 29.386723] The buggy address belongs to the page: [ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0 [ 29.387587] flags: 0x100000000000200(slab) [ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180 [ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 29.387624] page dumped because: kasan: bad access detected [ 29.387920] Memory state around the buggy address: [ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 29.392578] ^ [ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 29.396003] ================================================================== [ 29.397260] Disabling lock debugging due to kernel taint io_sq_wq_submit_work free and read req again. Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The commit eb1f002 ("lockdep,trace: Expose tracepoints"), started to expose us for tracepoints. This lead to the following RCU splat on an ARM64 Qcom board. [ 5.529634] WARNING: suspicious RCU usage [ 5.537307] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.541092] 5.9.0-rc3 #86 Not tainted [ 5.541098] ----------------------------- [ 5.541105] ../include/trace/events/lock.h:37 suspicious rcu_dereference_check() usage! [ 5.541110] [ 5.541110] other info that might help us debug this: [ 5.541110] [ 5.541116] [ 5.541116] rcu_scheduler_active = 2, debug_locks = 1 [ 5.541122] RCU used illegally from extended quiescent state! [ 5.541129] no locks held by swapper/0/0. [ 5.541134] [ 5.541134] stack backtrace: [ 5.541143] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc3 #86 [ 5.541149] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 5.541157] Call trace: [ 5.568185] sdhci_msm 7864900.sdhci: Got CD GPIO [ 5.574186] dump_backtrace+0x0/0x1c8 [ 5.574206] show_stack+0x14/0x20 [ 5.574229] dump_stack+0xe8/0x154 [ 5.574250] lockdep_rcu_suspicious+0xd4/0xf8 [ 5.574269] lock_acquire+0x3f0/0x460 [ 5.574292] _raw_spin_lock_irqsave+0x80/0xb0 [ 5.574314] __pm_runtime_suspend+0x4c/0x188 [ 5.574341] psci_enter_domain_idle_state+0x40/0xa0 [ 5.574362] cpuidle_enter_state+0xc0/0x610 [ 5.646487] cpuidle_enter+0x38/0x50 [ 5.650651] call_cpuidle+0x18/0x40 [ 5.654467] do_idle+0x228/0x278 [ 5.657678] cpu_startup_entry+0x24/0x70 [ 5.661153] rest_init+0x1a4/0x278 [ 5.665061] arch_call_rest_init+0xc/0x14 [ 5.668272] start_kernel+0x508/0x540 Following the path in pm_runtime_put_sync_suspend() from psci_enter_domain_idle_state(), it seems like we end up using the RCU. Therefore, let's simply silence the splat by informing the RCU about it with RCU_NONIDLE. Note that, this is a temporary solution. Instead we should strive to avoid using RCU_NONIDLE (and similar), but rather push rcu_idle_enter|exit() further down, closer to the arch specific code. However, as the CPU PM notifiers are also using the RCU, additional rework is needed. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit 36050d8 ] The commit eb1f002 ("lockdep,trace: Expose tracepoints"), started to expose us for tracepoints. This lead to the following RCU splat on an ARM64 Qcom board. [ 5.529634] WARNING: suspicious RCU usage [ 5.537307] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.541092] 5.9.0-rc3 #86 Not tainted [ 5.541098] ----------------------------- [ 5.541105] ../include/trace/events/lock.h:37 suspicious rcu_dereference_check() usage! [ 5.541110] [ 5.541110] other info that might help us debug this: [ 5.541110] [ 5.541116] [ 5.541116] rcu_scheduler_active = 2, debug_locks = 1 [ 5.541122] RCU used illegally from extended quiescent state! [ 5.541129] no locks held by swapper/0/0. [ 5.541134] [ 5.541134] stack backtrace: [ 5.541143] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc3 #86 [ 5.541149] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 5.541157] Call trace: [ 5.568185] sdhci_msm 7864900.sdhci: Got CD GPIO [ 5.574186] dump_backtrace+0x0/0x1c8 [ 5.574206] show_stack+0x14/0x20 [ 5.574229] dump_stack+0xe8/0x154 [ 5.574250] lockdep_rcu_suspicious+0xd4/0xf8 [ 5.574269] lock_acquire+0x3f0/0x460 [ 5.574292] _raw_spin_lock_irqsave+0x80/0xb0 [ 5.574314] __pm_runtime_suspend+0x4c/0x188 [ 5.574341] psci_enter_domain_idle_state+0x40/0xa0 [ 5.574362] cpuidle_enter_state+0xc0/0x610 [ 5.646487] cpuidle_enter+0x38/0x50 [ 5.650651] call_cpuidle+0x18/0x40 [ 5.654467] do_idle+0x228/0x278 [ 5.657678] cpu_startup_entry+0x24/0x70 [ 5.661153] rest_init+0x1a4/0x278 [ 5.665061] arch_call_rest_init+0xc/0x14 [ 5.668272] start_kernel+0x508/0x540 Following the path in pm_runtime_put_sync_suspend() from psci_enter_domain_idle_state(), it seems like we end up using the RCU. Therefore, let's simply silence the splat by informing the RCU about it with RCU_NONIDLE. Note that, this is a temporary solution. Instead we should strive to avoid using RCU_NONIDLE (and similar), but rather push rcu_idle_enter|exit() further down, closer to the arch specific code. However, as the CPU PM notifiers are also using the RCU, additional rework is needed. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang <Lijian.Zhang@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>

In some cases skb head could be locked and entire header data is pulled from skb. When skb_zerocopy() called in such cases, following BUG is triggered. This patch fixes it by copying entire skb in such cases. This could be optimized incase this is performance bottleneck. ---8<--- kernel BUG at net/core/skbuff.c:2961! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:skb_zerocopy+0x37a/0x3a0 RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246 Call Trace: <IRQ> queue_userspace_packet+0x2af/0x5e0 [openvswitch] ovs_dp_upcall+0x3d/0x60 [openvswitch] ovs_dp_process_packet+0x125/0x150 [openvswitch] ovs_vport_receive+0x77/0xd0 [openvswitch] netdev_port_receive+0x87/0x130 [openvswitch] netdev_frame_hook+0x4b/0x60 [openvswitch] __netif_receive_skb_core+0x2b4/0xc90 __netif_receive_skb_one_core+0x3f/0xa0 __netif_receive_skb+0x18/0x60 process_backlog+0xa9/0x160 net_rx_action+0x142/0x390 __do_softirq+0xe1/0x2d6 irq_exit+0xae/0xb0 do_IRQ+0x5a/0xf0 common_interrupt+0xf/0xf Code that triggered BUG: int skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen) { int i, j = 0; int plen = 0; /* length of skb->head fragment */ int ret; struct page *page; unsigned int offset; BUG_ON(!from->head_frag && !hlen); Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit 6206b79 ] Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang <Lijian.Zhang@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a17ad09 ] In some cases skb head could be locked and entire header data is pulled from skb. When skb_zerocopy() called in such cases, following BUG is triggered. This patch fixes it by copying entire skb in such cases. This could be optimized incase this is performance bottleneck. ---8<--- kernel BUG at net/core/skbuff.c:2961! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:skb_zerocopy+0x37a/0x3a0 RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246 Call Trace: <IRQ> queue_userspace_packet+0x2af/0x5e0 [openvswitch] ovs_dp_upcall+0x3d/0x60 [openvswitch] ovs_dp_process_packet+0x125/0x150 [openvswitch] ovs_vport_receive+0x77/0xd0 [openvswitch] netdev_port_receive+0x87/0x130 [openvswitch] netdev_frame_hook+0x4b/0x60 [openvswitch] __netif_receive_skb_core+0x2b4/0xc90 __netif_receive_skb_one_core+0x3f/0xa0 __netif_receive_skb+0x18/0x60 process_backlog+0xa9/0x160 net_rx_action+0x142/0x390 __do_softirq+0xe1/0x2d6 irq_exit+0xae/0xb0 do_IRQ+0x5a/0xf0 common_interrupt+0xf/0xf Code that triggered BUG: int skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen) { int i, j = 0; int plen = 0; /* length of skb->head fragment */ int ret; struct page *page; unsigned int offset; BUG_ON(!from->head_frag && !hlen); Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6206b79 ] Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang <Lijian.Zhang@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a17ad09 ] In some cases skb head could be locked and entire header data is pulled from skb. When skb_zerocopy() called in such cases, following BUG is triggered. This patch fixes it by copying entire skb in such cases. This could be optimized incase this is performance bottleneck. ---8<--- kernel BUG at net/core/skbuff.c:2961! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 0 Comm: swapper/2 Tainted: G OE 5.4.0-77-generic #86-Ubuntu Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:skb_zerocopy+0x37a/0x3a0 RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246 Call Trace: <IRQ> queue_userspace_packet+0x2af/0x5e0 [openvswitch] ovs_dp_upcall+0x3d/0x60 [openvswitch] ovs_dp_process_packet+0x125/0x150 [openvswitch] ovs_vport_receive+0x77/0xd0 [openvswitch] netdev_port_receive+0x87/0x130 [openvswitch] netdev_frame_hook+0x4b/0x60 [openvswitch] __netif_receive_skb_core+0x2b4/0xc90 __netif_receive_skb_one_core+0x3f/0xa0 __netif_receive_skb+0x18/0x60 process_backlog+0xa9/0x160 net_rx_action+0x142/0x390 __do_softirq+0xe1/0x2d6 irq_exit+0xae/0xb0 do_IRQ+0x5a/0xf0 common_interrupt+0xf/0xf Code that triggered BUG: int skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen) { int i, j = 0; int plen = 0; /* length of skb->head fragment */ int ret; struct page *page; unsigned int offset; BUG_ON(!from->head_frag && !hlen); Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ging The following bug is reported to be triggered when starting X on x86-32 system with i915: [ 225.777375] kernel BUG at mm/memory.c:2664! [ 225.777391] invalid opcode: 0000 [#1] PREEMPT SMP [ 225.777405] CPU: 0 PID: 2402 Comm: Xorg Not tainted 6.1.0-rc3-bdg+ #86 [ 225.777415] Hardware name: /8I865G775-G, BIOS F1 08/29/2006 [ 225.777421] EIP: __apply_to_page_range+0x24d/0x31c [ 225.777437] Code: ff ff 8b 55 e8 8b 45 cc e8 0a 11 ec ff 89 d8 83 c4 28 5b 5e 5f 5d c3 81 7d e0 a0 ef 96 c1 74 ad 8b 45 d0 e8 2d 83 49 00 eb a3 <0f> 0b 25 00 f0 ff ff 81 eb 00 00 00 40 01 c3 8b 45 ec 8b 00 e8 76 [ 225.777446] EAX: 00000001 EBX: c53a3b58 ECX: b5c00000 EDX: c258aa00 [ 225.777454] ESI: b5c00000 EDI: b5900000 EBP: c4b0fdb4 ESP: c4b0fd80 [ 225.777462] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010202 [ 225.777470] CR0: 80050033 CR2: b5900000 CR3: 053a3000 CR4: 000006d0 [ 225.777479] Call Trace: [ 225.777486] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777684] apply_to_page_range+0x21/0x27 [ 225.777694] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777870] remap_io_mapping+0x49/0x75 [i915] [ 225.778046] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.778220] ? mutex_unlock+0xb/0xd [ 225.778231] ? i915_vma_pin_fence+0x6d/0xf7 [i915] [ 225.778420] vm_fault_gtt+0x2a9/0x8f1 [i915] [ 225.778644] ? lock_is_held_type+0x56/0xe7 [ 225.778655] ? lock_is_held_type+0x7a/0xe7 [ 225.778663] ? 0xc1000000 [ 225.778670] __do_fault+0x21/0x6a [ 225.778679] handle_mm_fault+0x708/0xb21 [ 225.778686] ? mt_find+0x21e/0x5ae [ 225.778696] exc_page_fault+0x185/0x705 [ 225.778704] ? doublefault_shim+0x127/0x127 [ 225.778715] handle_exception+0x130/0x130 [ 225.778723] EIP: 0xb700468a Recently pud_huge() got aware of non-present entry by commit 3a194f3 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") to handle some special states of gigantic page. However, it's overlooked that pud_none() always returns false when running with 2-level paging, and as a result pud_huge() can return true pointlessly. Introduce "#if CONFIG_PGTABLE_LEVELS > 2" to pud_huge() to deal with this. Link: https://lkml.kernel.org/r/20221107021010.2449306-1-naoya.horiguchi@linux.dev Fixes: 3a194f3 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…ging commit 1fdbed6 upstream. The following bug is reported to be triggered when starting X on x86-32 system with i915: [ 225.777375] kernel BUG at mm/memory.c:2664! [ 225.777391] invalid opcode: 0000 [#1] PREEMPT SMP [ 225.777405] CPU: 0 PID: 2402 Comm: Xorg Not tainted 6.1.0-rc3-bdg+ #86 [ 225.777415] Hardware name: /8I865G775-G, BIOS F1 08/29/2006 [ 225.777421] EIP: __apply_to_page_range+0x24d/0x31c [ 225.777437] Code: ff ff 8b 55 e8 8b 45 cc e8 0a 11 ec ff 89 d8 83 c4 28 5b 5e 5f 5d c3 81 7d e0 a0 ef 96 c1 74 ad 8b 45 d0 e8 2d 83 49 00 eb a3 <0f> 0b 25 00 f0 ff ff 81 eb 00 00 00 40 01 c3 8b 45 ec 8b 00 e8 76 [ 225.777446] EAX: 00000001 EBX: c53a3b58 ECX: b5c00000 EDX: c258aa00 [ 225.777454] ESI: b5c00000 EDI: b5900000 EBP: c4b0fdb4 ESP: c4b0fd80 [ 225.777462] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010202 [ 225.777470] CR0: 80050033 CR2: b5900000 CR3: 053a3000 CR4: 000006d0 [ 225.777479] Call Trace: [ 225.777486] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777684] apply_to_page_range+0x21/0x27 [ 225.777694] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777870] remap_io_mapping+0x49/0x75 [i915] [ 225.778046] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.778220] ? mutex_unlock+0xb/0xd [ 225.778231] ? i915_vma_pin_fence+0x6d/0xf7 [i915] [ 225.778420] vm_fault_gtt+0x2a9/0x8f1 [i915] [ 225.778644] ? lock_is_held_type+0x56/0xe7 [ 225.778655] ? lock_is_held_type+0x7a/0xe7 [ 225.778663] ? 0xc1000000 [ 225.778670] __do_fault+0x21/0x6a [ 225.778679] handle_mm_fault+0x708/0xb21 [ 225.778686] ? mt_find+0x21e/0x5ae [ 225.778696] exc_page_fault+0x185/0x705 [ 225.778704] ? doublefault_shim+0x127/0x127 [ 225.778715] handle_exception+0x130/0x130 [ 225.778723] EIP: 0xb700468a Recently pud_huge() got aware of non-present entry by commit 3a194f3 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") to handle some special states of gigantic page. However, it's overlooked that pud_none() always returns false when running with 2-level paging, and as a result pud_huge() can return true pointlessly. Introduce "#if CONFIG_PGTABLE_LEVELS > 2" to pud_huge() to deal with this. Link: https://lkml.kernel.org/r/20221107021010.2449306-1-naoya.horiguchi@linux.dev Fixes: 3a194f3 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The inline assembly for arm64's cmpxchg_double*() implementations use a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a pointer to unsigned long, and thus the hazard only applies to the first 8 bytes of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, leading to a number of potential problems. This is similar to what we fixed back in commit: fee960b ("arm64: xchg: hazard against entire exchange variable") ... but we forgot to adjust cmpxchg_double*() similarly at the same time. The same problem applies, as demonstrated with the following test: | struct big { | u64 lo, hi; | } __aligned(128); | | unsigned long foo(struct big *b) | { | u64 hi_old, hi_new; | | hi_old = b->hi; | cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78); | hi_new = b->hi; | | return hi_old ^ hi_new; | } ... which GCC 12.1.0 compiles as: | 0000000000000000 <foo>: | 0: d503233f paciasp | 4: aa0003e4 mov x4, x0 | 8: 1400000e b 40 <foo+0x40> | c: d2800240 mov x0, #0x12 // #18 | 10: d2800681 mov x1, #0x34 // #52 | 14: aa0003e5 mov x5, x0 | 18: aa0103e6 mov x6, x1 | 1c: d2800ac2 mov x2, #0x56 // #86 | 20: d2800f03 mov x3, #0x78 // #120 | 24: 48207c82 casp x0, x1, x2, x3, [x4] | 28: ca050000 eor x0, x0, x5 | 2c: ca060021 eor x1, x1, x6 | 30: aa010000 orr x0, x0, x1 | 34: d2800000 mov x0, #0x0 // #0 <--- BANG | 38: d50323bf autiasp | 3c: d65f03c0 ret | 40: d2800240 mov x0, #0x12 // #18 | 44: d2800681 mov x1, #0x34 // #52 | 48: d2800ac2 mov x2, #0x56 // #86 | 4c: d2800f03 mov x3, #0x78 // #120 | 50: f9800091 prfm pstl1strm, [x4] | 54: c87f1885 ldxp x5, x6, [x4] | 58: ca0000a5 eor x5, x5, x0 | 5c: ca0100c6 eor x6, x6, x1 | 60: aa0600a6 orr x6, x5, x6 | 64: b5000066 cbnz x6, 70 <foo+0x70> | 68: c8250c82 stxp w5, x2, x3, [x4] | 6c: 35ffff45 cbnz w5, 54 <foo+0x54> | 70: d2800000 mov x0, #0x0 // #0 <--- BANG | 74: d50323bf autiasp | 78: d65f03c0 ret Notice that at the lines with "BANG" comments, GCC has assumed that the higher 8 bytes are unchanged by the cmpxchg_double() call, and that `hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and LL/SC versions of cmpxchg_double(). This patch fixes the issue by passing a pointer to __uint128_t into the +Q constraint, ensuring that the compiler hazards against the entire 16 bytes being modified. With this change, GCC 12.1.0 compiles the above test as: | 0000000000000000 <foo>: | 0: f9400407 ldr x7, [x0, #8] | 4: d503233f paciasp | 8: aa0003e4 mov x4, x0 | c: 1400000f b 48 <foo+0x48> | 10: d2800240 mov x0, #0x12 // #18 | 14: d2800681 mov x1, #0x34 // #52 | 18: aa0003e5 mov x5, x0 | 1c: aa0103e6 mov x6, x1 | 20: d2800ac2 mov x2, #0x56 // #86 | 24: d2800f03 mov x3, #0x78 // #120 | 28: 48207c82 casp x0, x1, x2, x3, [x4] | 2c: ca050000 eor x0, x0, x5 | 30: ca060021 eor x1, x1, x6 | 34: aa010000 orr x0, x0, x1 | 38: f9400480 ldr x0, [x4, #8] | 3c: d50323bf autiasp | 40: ca0000e0 eor x0, x7, x0 | 44: d65f03c0 ret | 48: d2800240 mov x0, #0x12 // #18 | 4c: d2800681 mov x1, #0x34 // #52 | 50: d2800ac2 mov x2, #0x56 // #86 | 54: d2800f03 mov x3, #0x78 // #120 | 58: f9800091 prfm pstl1strm, [x4] | 5c: c87f1885 ldxp x5, x6, [x4] | 60: ca0000a5 eor x5, x5, x0 | 64: ca0100c6 eor x6, x6, x1 | 68: aa0600a6 orr x6, x5, x6 | 6c: b5000066 cbnz x6, 78 <foo+0x78> | 70: c8250c82 stxp w5, x2, x3, [x4] | 74: 35ffff45 cbnz w5, 5c <foo+0x5c> | 78: f9400480 ldr x0, [x4, #8] | 7c: d50323bf autiasp | 80: ca0000e0 eor x0, x7, x0 | 84: d65f03c0 ret ... sampling the high 8 bytes before and after the cmpxchg, and performing an EOR, as we'd expect. For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note that linux-4.9.y is oldest currently supported stable release, and mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run on my machines due to library incompatibilities. I've also used a standalone test to check that we can use a __uint128_t pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM 3.9.1. Fixes: 5284e1b ("arm64: xchg: Implement cmpxchg_double") Fixes: e9a4b79 ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU") Reported-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/ Reported-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/ Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>

commit 031af50 upstream. The inline assembly for arm64's cmpxchg_double*() implementations use a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a pointer to unsigned long, and thus the hazard only applies to the first 8 bytes of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, leading to a number of potential problems. This is similar to what we fixed back in commit: fee960b ("arm64: xchg: hazard against entire exchange variable") ... but we forgot to adjust cmpxchg_double*() similarly at the same time. The same problem applies, as demonstrated with the following test: | struct big { | u64 lo, hi; | } __aligned(128); | | unsigned long foo(struct big *b) | { | u64 hi_old, hi_new; | | hi_old = b->hi; | cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78); | hi_new = b->hi; | | return hi_old ^ hi_new; | } ... which GCC 12.1.0 compiles as: | 0000000000000000 <foo>: | 0: d503233f paciasp | 4: aa0003e4 mov x4, x0 | 8: 1400000e b 40 <foo+0x40> | c: d2800240 mov x0, #0x12 // #18 | 10: d2800681 mov x1, #0x34 // #52 | 14: aa0003e5 mov x5, x0 | 18: aa0103e6 mov x6, x1 | 1c: d2800ac2 mov x2, #0x56 // #86 | 20: d2800f03 mov x3, #0x78 // #120 | 24: 48207c82 casp x0, x1, x2, x3, [x4] | 28: ca050000 eor x0, x0, x5 | 2c: ca060021 eor x1, x1, x6 | 30: aa010000 orr x0, x0, x1 | 34: d2800000 mov x0, #0x0 // #0 <--- BANG | 38: d50323bf autiasp | 3c: d65f03c0 ret | 40: d2800240 mov x0, #0x12 // #18 | 44: d2800681 mov x1, #0x34 // #52 | 48: d2800ac2 mov x2, #0x56 // #86 | 4c: d2800f03 mov x3, #0x78 // #120 | 50: f9800091 prfm pstl1strm, [x4] | 54: c87f1885 ldxp x5, x6, [x4] | 58: ca0000a5 eor x5, x5, x0 | 5c: ca0100c6 eor x6, x6, x1 | 60: aa0600a6 orr x6, x5, x6 | 64: b5000066 cbnz x6, 70 <foo+0x70> | 68: c8250c82 stxp w5, x2, x3, [x4] | 6c: 35ffff45 cbnz w5, 54 <foo+0x54> | 70: d2800000 mov x0, #0x0 // #0 <--- BANG | 74: d50323bf autiasp | 78: d65f03c0 ret Notice that at the lines with "BANG" comments, GCC has assumed that the higher 8 bytes are unchanged by the cmpxchg_double() call, and that `hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and LL/SC versions of cmpxchg_double(). This patch fixes the issue by passing a pointer to __uint128_t into the +Q constraint, ensuring that the compiler hazards against the entire 16 bytes being modified. With this change, GCC 12.1.0 compiles the above test as: | 0000000000000000 <foo>: | 0: f9400407 ldr x7, [x0, #8] | 4: d503233f paciasp | 8: aa0003e4 mov x4, x0 | c: 1400000f b 48 <foo+0x48> | 10: d2800240 mov x0, #0x12 // #18 | 14: d2800681 mov x1, #0x34 // #52 | 18: aa0003e5 mov x5, x0 | 1c: aa0103e6 mov x6, x1 | 20: d2800ac2 mov x2, #0x56 // #86 | 24: d2800f03 mov x3, #0x78 // #120 | 28: 48207c82 casp x0, x1, x2, x3, [x4] | 2c: ca050000 eor x0, x0, x5 | 30: ca060021 eor x1, x1, x6 | 34: aa010000 orr x0, x0, x1 | 38: f9400480 ldr x0, [x4, #8] | 3c: d50323bf autiasp | 40: ca0000e0 eor x0, x7, x0 | 44: d65f03c0 ret | 48: d2800240 mov x0, #0x12 // #18 | 4c: d2800681 mov x1, #0x34 // #52 | 50: d2800ac2 mov x2, #0x56 // #86 | 54: d2800f03 mov x3, #0x78 // #120 | 58: f9800091 prfm pstl1strm, [x4] | 5c: c87f1885 ldxp x5, x6, [x4] | 60: ca0000a5 eor x5, x5, x0 | 64: ca0100c6 eor x6, x6, x1 | 68: aa0600a6 orr x6, x5, x6 | 6c: b5000066 cbnz x6, 78 <foo+0x78> | 70: c8250c82 stxp w5, x2, x3, [x4] | 74: 35ffff45 cbnz w5, 5c <foo+0x5c> | 78: f9400480 ldr x0, [x4, #8] | 7c: d50323bf autiasp | 80: ca0000e0 eor x0, x7, x0 | 84: d65f03c0 ret ... sampling the high 8 bytes before and after the cmpxchg, and performing an EOR, as we'd expect. For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note that linux-4.9.y is oldest currently supported stable release, and mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run on my machines due to library incompatibilities. I've also used a standalone test to check that we can use a __uint128_t pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM 3.9.1. Fixes: 5284e1b ("arm64: xchg: Implement cmpxchg_double") Fixes: e9a4b79 ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU") Reported-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/ Reported-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/ Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 031af50 ] The inline assembly for arm64's cmpxchg_double*() implementations use a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a pointer to unsigned long, and thus the hazard only applies to the first 8 bytes of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, leading to a number of potential problems. This is similar to what we fixed back in commit: fee960b ("arm64: xchg: hazard against entire exchange variable") ... but we forgot to adjust cmpxchg_double*() similarly at the same time. The same problem applies, as demonstrated with the following test: | struct big { | u64 lo, hi; | } __aligned(128); | | unsigned long foo(struct big *b) | { | u64 hi_old, hi_new; | | hi_old = b->hi; | cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78); | hi_new = b->hi; | | return hi_old ^ hi_new; | } ... which GCC 12.1.0 compiles as: | 0000000000000000 <foo>: | 0: d503233f paciasp | 4: aa0003e4 mov x4, x0 | 8: 1400000e b 40 <foo+0x40> | c: d2800240 mov x0, #0x12 // #18 | 10: d2800681 mov x1, #0x34 // #52 | 14: aa0003e5 mov x5, x0 | 18: aa0103e6 mov x6, x1 | 1c: d2800ac2 mov x2, #0x56 // #86 | 20: d2800f03 mov x3, #0x78 // #120 | 24: 48207c82 casp x0, x1, x2, x3, [x4] | 28: ca050000 eor x0, x0, x5 | 2c: ca060021 eor x1, x1, x6 | 30: aa010000 orr x0, x0, x1 | 34: d2800000 mov x0, #0x0 // #0 <--- BANG | 38: d50323bf autiasp | 3c: d65f03c0 ret | 40: d2800240 mov x0, #0x12 // #18 | 44: d2800681 mov x1, #0x34 // #52 | 48: d2800ac2 mov x2, #0x56 // #86 | 4c: d2800f03 mov x3, #0x78 // #120 | 50: f9800091 prfm pstl1strm, [x4] | 54: c87f1885 ldxp x5, x6, [x4] | 58: ca0000a5 eor x5, x5, x0 | 5c: ca0100c6 eor x6, x6, x1 | 60: aa0600a6 orr x6, x5, x6 | 64: b5000066 cbnz x6, 70 <foo+0x70> | 68: c8250c82 stxp w5, x2, x3, [x4] | 6c: 35ffff45 cbnz w5, 54 <foo+0x54> | 70: d2800000 mov x0, #0x0 // #0 <--- BANG | 74: d50323bf autiasp | 78: d65f03c0 ret Notice that at the lines with "BANG" comments, GCC has assumed that the higher 8 bytes are unchanged by the cmpxchg_double() call, and that `hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and LL/SC versions of cmpxchg_double(). This patch fixes the issue by passing a pointer to __uint128_t into the +Q constraint, ensuring that the compiler hazards against the entire 16 bytes being modified. With this change, GCC 12.1.0 compiles the above test as: | 0000000000000000 <foo>: | 0: f9400407 ldr x7, [x0, #8] | 4: d503233f paciasp | 8: aa0003e4 mov x4, x0 | c: 1400000f b 48 <foo+0x48> | 10: d2800240 mov x0, #0x12 // #18 | 14: d2800681 mov x1, #0x34 // #52 | 18: aa0003e5 mov x5, x0 | 1c: aa0103e6 mov x6, x1 | 20: d2800ac2 mov x2, #0x56 // #86 | 24: d2800f03 mov x3, #0x78 // #120 | 28: 48207c82 casp x0, x1, x2, x3, [x4] | 2c: ca050000 eor x0, x0, x5 | 30: ca060021 eor x1, x1, x6 | 34: aa010000 orr x0, x0, x1 | 38: f9400480 ldr x0, [x4, #8] | 3c: d50323bf autiasp | 40: ca0000e0 eor x0, x7, x0 | 44: d65f03c0 ret | 48: d2800240 mov x0, #0x12 // #18 | 4c: d2800681 mov x1, #0x34 // #52 | 50: d2800ac2 mov x2, #0x56 // #86 | 54: d2800f03 mov x3, #0x78 // #120 | 58: f9800091 prfm pstl1strm, [x4] | 5c: c87f1885 ldxp x5, x6, [x4] | 60: ca0000a5 eor x5, x5, x0 | 64: ca0100c6 eor x6, x6, x1 | 68: aa0600a6 orr x6, x5, x6 | 6c: b5000066 cbnz x6, 78 <foo+0x78> | 70: c8250c82 stxp w5, x2, x3, [x4] | 74: 35ffff45 cbnz w5, 5c <foo+0x5c> | 78: f9400480 ldr x0, [x4, #8] | 7c: d50323bf autiasp | 80: ca0000e0 eor x0, x7, x0 | 84: d65f03c0 ret ... sampling the high 8 bytes before and after the cmpxchg, and performing an EOR, as we'd expect. For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note that linux-4.9.y is oldest currently supported stable release, and mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run on my machines due to library incompatibilities. I've also used a standalone test to check that we can use a __uint128_t pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM 3.9.1. Fixes: 5284e1b ("arm64: xchg: Implement cmpxchg_double") Fixes: e9a4b79 ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU") Reported-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/ Reported-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/ Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: #344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: #345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: #346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ccacbbc ] If the following configurations are set, CONFIG_DEBUG_RWSEMS=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_RWSEM_SPIN_ON_OWNER=y And run the following command, [root@localhost sys]# cat /sys/devices/pci0000:6b/0000:6b:00.0/qat_rl/pir The following warning log appears, ------------[ cut here ]------------ DEBUG_RWSEMS_WARN_ON(sem->magic != sem): count = 0x0, magic = 0x0, owner = 0x1, curr 0xff11000119288040, list not empty WARNING: CPU: 131 PID: 1254984 at kernel/locking/rwsem.c:1280 down_read+0x439/0x7f0 CPU: 131 PID: 1254984 Comm: cat Kdump: loaded Tainted: G W 6.10.0-rc4+ #86 b2ae60c8ceabed15f4fd2dba03c1c5a5f7f4040c Hardware name: Lenovo ThinkServer SR660 V3/SR660 V3, BIOS T8E166X-2.54 05/30/2024 RIP: 0010:down_read+0x439/0x7f0 Code: 44 24 10 80 3c 02 00 0f 85 05 03 00 00 48 8b 13 41 54 48 c7 c6 a0 3e 0e b4 48 c7 c7 e0 3e 0e b4 4c 8b 4c 24 08 e8 77 d5 40 fd <0f> 0b 59 e9 bc fc ff ff 0f 1f 44 00 00 e9 e2 fd ff ff 4c 8d 7b 08 RSP: 0018:ffa0000035f67a78 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ff1100012b03a658 RCX: 0000000000000000 RDX: 0000000080000002 RSI: 0000000000000008 RDI: 0000000000000001 RBP: 1ff4000006becf53 R08: fff3fc0006becf17 R09: fff3fc0006becf17 R10: fff3fc0006becf16 R11: ffa0000035f678b7 R12: ffffffffb40e3e60 R13: ffffffffb627d1f4 R14: ff1100012b03a6d0 R15: ff1100012b03a6c8 FS: 00007fa9ff9a6740(0000) GS:ff1100081e600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa9ff984000 CR3: 00000002118ae006 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> pir_show+0x5d/0xe0 [intel_qat 9e297e249ab040329cf58b657b06f418fd5c5855] dev_attr_show+0x3f/0xc0 sysfs_kf_seq_show+0x1ce/0x400 seq_read_iter+0x3fa/0x10b0 vfs_read+0x6f5/0xb20 ksys_read+0xe9/0x1d0 do_syscall_64+0x8a/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fa9ff6fd9b2 Code: c0 e9 b2 fe ff ff 50 48 8d 3d ea 1d 0c 00 e8 c5 fd 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007ffc0616b968 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fa9ff6fd9b2 RDX: 0000000000020000 RSI: 00007fa9ff985000 RDI: 0000000000000003 RBP: 00007fa9ff985000 R08: 00007fa9ff984010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb102c126>] copy_process+0x21e6/0x6e70 softirqs last enabled at (0): [<ffffffffb102c176>] copy_process+0x2236/0x6e70 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace 0000000000000000 ]--- The rate_limiting->user_input.lock rwsem lock is not initialized before use. Let's initialize it. Signed-off-by: Jiwei Sun <sunjw10@lenovo.com> Reviewed-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

popcornmix closed this as completed Sep 9, 2012

fran6co pushed a commit to fran6co/linux that referenced this issue May 24, 2016

Add #if for 3.14 kernel change (raspberrypi#87)

d8727e0

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes raspberrypi#86

popcornmix pushed a commit that referenced this issue Jun 13, 2016

Add #if for 3.14 kernel change (#87)

af8b5c2

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Jun 21, 2016

Add #if for 3.14 kernel change (#87)

43dcefa

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Jun 26, 2016

Add #if for 3.14 kernel change (#87)

338eaed

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Jun 26, 2016

Add #if for 3.14 kernel change (#87)

6d603e5

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Jul 12, 2016

Add #if for 3.14 kernel change (#87)

53ef578

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Jul 28, 2016

Add #if for 3.14 kernel change (#87)

55d1942

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Aug 12, 2016

Add #if for 3.14 kernel change (#87)

49418d2

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Aug 19, 2016

Add #if for 3.14 kernel change (#87)

a97f7be

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Aug 31, 2016

Add #if for 3.14 kernel change (#87)

9d2f8b1

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Sep 1, 2016

Add #if for 3.14 kernel change (#87)

c20f8a8

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Sep 5, 2016

Add #if for 3.14 kernel change (#87)

dc9ae22

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Sep 7, 2016

Add #if for 3.14 kernel change (#87)

b1d9bd8

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Sep 7, 2016

Add #if for 3.14 kernel change (#87)

129df03

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Sep 7, 2016

Add #if for 3.14 kernel change (#87)

0a49176

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Sep 14, 2016

Add #if for 3.14 kernel change (#87)

99c8a71

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

popcornmix pushed a commit that referenced this issue Sep 15, 2016

Add #if for 3.14 kernel change (#87)

33c6aa7

Fixes compiling after changes in torvalds/linux@f663dd9 and torvalds/linux@99932d4 Fixes #86

yangjunsss mentioned this issue Feb 1, 2020

‘IPT_ECN_OP_SET_ECE’ undeclared when building kernel #3444

Closed

hwdsl2 mentioned this issue Nov 30, 2021

iPhone ios15.1 不能连接 hwdsl2/docker-ipsec-vpn-server#264

Closed

6 tasks

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Missing IPSEC modules in raspbian kernel #86

Missing IPSEC modules in raspbian kernel #86

ovacikar commented Aug 16, 2012

popcornmix commented Aug 16, 2012

ovacikar commented Aug 16, 2012

ovacikar commented Aug 18, 2012

popcornmix commented Sep 3, 2012

popcornmix commented Sep 9, 2012

emilhugo commented Oct 23, 2012

Missing IPSEC modules in raspbian kernel #86

Missing IPSEC modules in raspbian kernel #86

Comments

ovacikar commented Aug 16, 2012

popcornmix commented Aug 16, 2012

ovacikar commented Aug 16, 2012

ovacikar commented Aug 18, 2012

popcornmix commented Sep 3, 2012

popcornmix commented Sep 9, 2012

emilhugo commented Oct 23, 2012