CRYPTO CURRENCY PRICE TICKER with 24 candlesticks chart for M5Stack
###SD-Card Version with configuation file### only needs config file "ccticker.cfg" on root of SD-Card
receiving WiFi data from Binance API/Websocket_v3 - by frittna (https://github.com/frittna/Crypto_Coin_Ticker)
This will show 24 candles, the min/max price and the volume as line, date and time are from time.nist.gov timeserver. For M5-Stack MCU , coded in ArduinoIDE 1.8.13 - last modified Nov.20.2021 15:20 CET - Version 1.0.53fix using spiffs + SDconfig
LAST EDIT: added cycling function (ButtonA+ButtonC together) which steps through your currencies after a certain time (default: 15sec for each)
added Timezone for Singapore (UTC+8)
minor changings: code merged to one version, so there is no need to have different versions anymore
autodetect the optional room sensor and show a 12x high sensor panel in case
temperature unit C or F and offset is set from SD-Config and not hardcoded anymore (because the M5-Stack is heating up itself it will never be accurate and has only limited expressiveness)
do not forget to update your sdconfig.cfg on SD-card too
#Using the App:
###############
This version needs a SD-Card whith the your WiFi credentials, favourite coinpairs, timezone and language(eng/ger/esp) in a textfile - see installation
ButtonA: switches through your favourite Coinpair (as many you want) e.g: BTC/USDT etc. which are available on Binance.com
ButtonB: changes the LCD-Brightness in 4 levels
ButtonC: 9 changeable Timeframes from 1 Minute to 1 Month
turn OFF the device pressing the red Button once OR by holding ButtonC for over 1 second
Press ButtonC, then, within 2 sec press ButtonA to switch down, or ButtonB to switch up through the timeframes: 1min->15mins->1hour->..
available timeframes are 1minute, 3m, 5m, 15m, 1h, 4h, 1d, 1w, 1Month
if you hold ButtonC at Startup: it will start with alternative SSID2/WiFi2-password instead (e.g your mobile phone's hotspot)
press ButtonA and ButtonC together to enable/disable cycling through all currencies after a set time (default:off, when turned on default:15sec)
##################################################################
#Further description:
#####################
The top infoPanel shows the WiFi-strength, batterylevel, colored indicators for "busy", SleepTimer, price moving and if charging from usb (can have delay up to 30s)
right now: english, german, spanish Language (day and month names)
SleepTimer: when holding ButtonB longer than 1,5 seconds it will start a user defined timer to powerOFF the device
If WiFi is failing more than 2 minutes it reduces the reconnect interval and brightness level, after 10 minutes -> shutdown device
Menu Loader compatible, if SD-Updater (menu.bin) is installed in your SD-Card hold ButtonA while booting up to start MenuLoader to load your apps
It is prepared for the use of a Neopixel RGB-LED bar (i use the built-in one in the Battery-Bottom Module for M5Stack/Fire with rgb 10 LEDs)
All settings will remain stored in internal memory after a reset so you can eject the SD-Card after setting up you favourites.
If you want to clear all stored settings from internal memory hold ButtonB at start-up.
If M5-Stack is in his BTC stand (the original grey vertical stand) the internal SHT room sensor is found and shows temp and humidity.
-> bc1qvfjd0x2r7fk3p0lwwaxvjjzgdrgjnu5fhqjqcv (Bitcoin/BTC - native segwit)
-> 0x8D88c8ff9A467F0821E8d1941D206164b11F4056 (Ethereum/ETH - or any ERC20 or BSC/BEP20 tokens)
-> D5QEBVqY3B9kUEMn9nRHexSbMaRgRafKiY (Doge/DOGE)
-> THRo4ujdmD5eYVPD2XUodN7NowRZ88F9rN (Tron/TRX or any TRC10/TRC20 tokens)
-> GDY2LAUPJFWCR4XWN5EHQ72VLYRY53CNCCA4IXTBBZBKMAGT2BSY7KUT (Stellar/XLM)
