Release 3.2

[revoxhere]

What's new, what's changed... 👀

• Add Raspberry Pi onboard leds control to PC Miner to signal share states by @revoxhere
• Add username check in config creator to the PC Miner and AVR Miner by @revoxhere
• Add missing translation strings by @revoxhere
• Add current config file text in greeting by @revoxhere
• Add ability to control how often ESP8266 MQTT update messages are sent by @tyrkelko in ESP8266 Control how often MQTT update messages are sent #1496
• Fix PC Miner clearing it's settings by @LDarki
• Fix DHT readings by @LDarki (Duino IoT)
• Fix mining key check by @revoxhere
• Update printlock in the PC Miner by @revoxhere
• Update polish translations by @revoxhere
• Update PC Miner thread notices by @revoxhere
• Update README_de_DE by @Techcrafter in Improved German translation of the README file. #1499
• Update README_kr_KR by @dnjswndbf in Update README_kr_KR.md #1502
• Update difficulty descriptions by @Techcrafter in Adjusted difficulty descriptions #1506

New contributor 👋

• @Techcrafter made their first contribution in Improved German translation of the README file. #1499

⚠️ NOTICE: .exe binaries may be detected as a virus by your antivirus software. This is a false positive caused by pyinstallers bootloader, read about it here. Duino-Coin is not a virus.

Full Changelog: 3.18...3.2
As always, please report any encountered issues. Happy mining!

---

This discussion was created from the release Release 3.2.

[Mifaxav]

How do I use this tool with mac?

[Techcrafter]

Download and install Python on your Mac. Afterwards, download the Duino Code source code .zip, extract it and run the .py file.

[Mifaxav]

Alright.. thanks :D

…

On Fri, 1 Jul, 2022, 2:02 pm Techcrafter, ***@***.***> wrote: @Mifaxav <https://github.com/Mifaxav> Download and install Python on your Mac. Afterwards, download the Duino Code source code .zip and run the .py file. — Reply to this email directly, view it on GitHub <#1526 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUD6MX3E7GBJPTMXTTZIOUDVR2UKBANCNFSM52KLTFEA> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[DaSquirrel22]

I am trying to download this software to my Rasberry Pi Pico using Arduino IDE. I cannot get my Pico to show up under a COM port. any suggestions on how to fix that?

[Techcrafter]

Hold the BOOTSEL button on the Pico while pluging it in to the computer.