This repository is for configuring the RMI-KB Mona-W PCBs that use ZMK.
Branches are named as seen above. Select the appropriate branch on the upper left drop-down menu to pick your desired layout.
-
When you do the tweezer test and you short two pins that are not part of your layout, the top left key will actuate.
- For example with the default layout (unified backspace), if you test the right half of the split backspace, it will send Esc. This is probably a bug with ZMK.
- Edit the
config/app/boards/shields/file to change your keymap.
- https://zmkfirmware.dev/docs/behaviors/key-press
- https://zmkfirmware.dev/docs/behaviors/layers
- and pretty much everything in the "Behaviors" section, plus
- https://zmkfirmware.dev/docs/codes/
-
Head over to the Actions tab at the top of the repository.
-
Click on the latest workflow run.
- If you did your keymap correctly, there should be a green checkmark to the left.
-
Click on the firmware file to download. Unzip it somewhere too.
-
Plug the USB connector in, and double press the reset button twice quickly (Has to be <500 ms apart).
- The reset button is located underneath the left shift.
- Drag and drop the UF2 file you unzipped to the mass storage device that appeared.