> **note**: This repository is archived and development / support is discontinued.

uClinux/distribution
====================

Contents
--------

1) Instructions for compiling
2) Changing the applications/kernel-options/libraries
3) Documentation


1) Instructions for Compiling
-----------------------------

  1. You will need a cross-compiler package for your target. Many binary
     tools packages exists specifically for compiling uClinux. Install
     that in the standard way first. For example, if you are targeting m68k
     or ColdFire systems then you can use the m68k-elf-tools binary
     packages of www.uclinux.org.
 
  2. If you have not un-archived the source package then do that now.
     It is a gziped tar image, so do:
 
       tar xvzf uClinux-dist-XXXXXXXX.tar.gz
 
     This will dump the source into a "uClinux-dist" directory.
     You can do this into any directory, typically use your own user
     login. (I don't recommend devloping as root, it is a bad pactice,
     and it will bite you one day!)
 
  3. Cd into the source tree:
 
          cd uClinux-dist
 
  4. Configure the build target:
 
          make xconfig
 
     You can also use "make config" or "make menuconfig" if you prefer.
 
     The top level selection is straight forward if you know the vendor of
     the board you want to compile for. You can choose also to modify the
     underlying default kernel and application configuration if you want.
 
     At first it is suggested that you use the default configuration for
     your target board. It will almost certainly work "as is".

     You can also select between different kernel versions and libraries,
     at this top level. Not all kernel versions support all boards, as a
     general rule choose 2.4.x. Also typically you would use glibc only on
     target processors that support virtual memory (x86, SH4, XSCALE).
     Most MMUless processors use uC-libc. If you choose a combination that
     doesn't have a default configuration file then the xconfig step will
     issue a message letting you know.
 
     Based on what platform you choose in this step the build will generate
     an appropriate default application set.

     Sometimes a number of questions will appear after you 'Save and Exit'.
     Do not be concerned,  it just means that some new config options have
     been added to the source tree that do not have defaults for the
     configuration you have chosen.  If this happens the safest option is
     to answer 'N' to each question as they appear.

  5. Build the dependencies:
 
          make dep
 
  6. Build the image:
 
          make
 
 
  Thats it!
 
  The make will generate appropriate binary images for the target hardware
  specified. All generated files will be placed under the "images" directory.
  The exact files vary from target to target, typically you end up with
  something like an "image.bin" file.

  How to load and run the generated image will depend on your target system
  hardware. There are a number of HOWTO documents under the Documentation
  directy that describe how to load and run the image on specific boards.
  Look for a file named after your target board.


2) Changing the Applications/Kernel/Libraries
---------------------------------------------

  You can modify the kernel configuration and application set generated for
  your target using the config system. You can configure by running one of
  the following three commands:

        make xconfig       - graphical X11 based config
        make menuconfig    - text menu based config
        make config        - plain text shell script based config

  Xconfig is by far the simplest to use, I would reccomend using that
  if you can.

  The key options under the "Target Platform Selection" menu are the
  following:

        Customize Kernel Settings
            Selecting this option run the standard Linux kernel config.

        Customize Vendor/User Settings
            Selecting this option will run a configure process allowing
            you to enable or disable individual applications and libraries.

   Use the online "Help" if unsure of what a configuration option means.

   When you 'Save and Exit' the build system will run you through the
   configs you have selected to customise.


3) Documention
--------------

  There is an assortment of documentaion files under the Documentaion
  directory. The more interresting ones are:

       SOURCE  -- file at the top level gives a brief run down of the
                  structure of this source distribution package.

       Documentation/Adding-User-Apps-HOWTO
               -- description of how to add a new application into the
                  config and build setup of the distribution.

       Documentation/Adding-Platforms-HOWTO
               -- description of how to add a new vendor board config to
                  the distribution.

       Documentation/<BOARD>-HOWTO
               -- describes building and loading for a particular board.