WAX 610/620 Failed setup, will retry error

[hssmith76]

Not sure whether this is down to the altest updates to Home Assistant or a firmware update on the devices as it happened at similar times but I now get the following error for both my WAX devices

WARNING (MainThread) [homeassistant.config_entries] Config entry 'Wax610' for netgear_wax integration not ready yet; Retrying in background
WARNING (MainThread) [homeassistant.config_entries] Config entry 'Wax620' for netgear_wax integration not ready yet; Retrying in background

Anyone else seeing this, repeated reloads and restarts are not resolving it.

[ronrath]

I'm having the same issue since upgrading firmware on my WAX 620 and WAX 630 devices

[rroller]

I bought a new netgear wax 610 and will upgrade to the latest firmware and test with it and try to fix this issue. Will keep you posted once I get the time to work on it.

[Jster007]

Same issues with WAX615; HA integration has stopped working.
Everything returns to work correctly after WAX615 firmware downgrade.

[JoostAB]

I have three WAX610 devices. Two of them still on V10.3.2.2 and working fine. One upgraded to V10.5.0.16 and stopped working in HA (device itself works ok).

[JoostAB]

@Jster007

Same issues with WAX615; HA integration has stopped working. Everything returns to work correctly after WAX615 firmware downgrade.

Just an Off-Topic question: Did you have to reconfigure the device? When I click 'Boot to Backup Firmware' (to V10.3.2.2) it gives me a warning that the device will go to factory defaults... Can I load a config backup created in V10.5.0.16?

[Jster007]

That's true, downgrade will reset configuration to factory default.
I don't test backup configuration loading, for personal specific needs I preferred to redo all the configuration manually...

[larzn]

Same issues with WAX620 in V10.6.0.7. HA integration worked well in V10.3.2.2.
I've got this message in AP log:

Sep 7 23:06:38 nddmp[3463]: session_and_security_handling: Invalid user privileges!!! (-1)
Sep 7 23:06:38 nddmp[3463]: Blocking the request due to invalid session params
Sep 7 23:06:38 nddmp[3463]: Blocking the request due to invalid session params

I use "admin" user with Read/Write access !!

[rroller]

I upgraded my new AP to the latest firmware and looked at the response. There's a new security token returned that needs to be passed as a header. I'll try to fix this soon, hopefully this weekend.

[rroller]

I got this working locally. I'll push a fix very soon.

[rroller]

Released in https://github.com/rroller/netgear/releases/tag/0.1.5

[martinhrpi]

I will test it next week with a 610 and 620

[JoostAB]

Yes! Works! Great work, thx

[sergeantbort]

Just wanted to advise I had to remove and re add to get it working after the update. But it does seem to be working now.

…

On Tue, Sep 19, 2023, 05:47 Joost Bloemsma ***@***.***> wrote: Yes! Works! Great work, thx — Reply to this email directly, view it on GitHub <#18 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATTQGRTJ5PQQLMHUYS44KJDX3FS3XANCNFSM6AAAAAA3D5XOT4> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[martinhrpi]

Works perfectly again on a 610 and 620! Thank you very much!