19 Dec 00:37

rv-jenkins

375707d

K Framework Release v7.1.192 Pre-release

Pre-release

K Framework Release v7.1.192

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

For version X.Y.Z, distribution DISTRO, and package ID ID, the following
instructions tell you how to install on each system. Note that this typically
requires about ~1.4GB of dependencies and will take some time.

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 5

17 Dec 13:50

rv-jenkins

v7.1.191

06a03e8

K Framework Release v7.1.191 Latest

Latest

K Framework Release v7.1.191

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

17 Dec 04:45

rv-jenkins

v7.1.190

c4354cd

K Framework Release v7.1.190

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

13 Dec 15:02

rv-jenkins

v7.1.188

fc55e2f

K Framework Release v7.1.188 Pre-release

Pre-release

K Framework Release v7.1.188

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

11 Dec 08:46

rv-jenkins

v7.1.187

ca93ca4

K Framework Release v7.1.187

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

10 Dec 19:42

rv-jenkins

v7.1.186

c8d0bee

K Framework Release v7.1.186

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

10 Dec 09:32

rv-jenkins

v7.1.185

547e2cc

K Framework Release v7.1.185 Pre-release

Pre-release

K Framework Release v7.1.185

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 5

05 Dec 10:29

rv-jenkins

v7.1.184

bb18443

K Framework Release v7.1.184

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

04 Dec 14:12

rv-jenkins

v7.1.183

2acc9fc

K Framework Release v7.1.183

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

04 Dec 05:03

rv-jenkins

v7.1.182

cd8dd09

K Framework Release v7.1.182

Installing the K Framework

Fast Installation (preferred)

The preferred way to install K is the kup tool, which is based on Nix.
No knowledge of Nix is required to use kup.

Install kup and K by running the following:

bash <(curl https://kframework.org/install)
kup install k

List available versions with:

kup list k

If kup indicates that there's a newer version, you can update by simply running:

kup install k

To install a specific version, run:

kup install k --version v6.3.11

Note that the versions marked as ✅ are cached in Runtime Verification's Nix binary cache and thus are the fastest to install.

Install through packages

We currently strive to provide packages for the following platforms:

Ubuntu Jammy Jellyfish (22.04)
macOS Ventura (13) via Homebrew
Docker Images

Pre-installation Notes

We do not currently support running K natively on Windows. To use K on
Windows 10, you are encouraged to install the
Windows Subsystem for Linux (version 2)
and follow the instructions for installing Ubuntu Jammy.

If you have already installed WSL, before proceeding, you will need to
enter the WSL environment. You can do this by:
1. opening up the command prompt (accessible by searching cmd or
  command prompt from the start menu);
2. using the wsl.exe command to access the WSL environment.
To use K in other non-linux environments (e.g. Windows 8 or earlier),
you will need to use a virtual machine (VM) software. We assume you have:
1. Created a virtual machine
2. Installed a Linux distribution (e.g. Ubuntu Jammy Jellyfish) on your
  virtual machine
Consult your virtual machine software if you need help with the above
steps. We recommend the free VirtualBox virtual machine software.

Before proceeding, follow the virtual machine softare UI to start your
Linux virtual machine and enter the command line environment.
WSL and virtual machine users should be aware that, if you use your web
browser to download the package, you will need to make it accessible to
the command line environment. For this reason, we recommend downloading the
package from the command line directly using a tool like wget. For
example, you could copy the package download URL and then type:
```
wget <package-download-url>
```
where <package-download-url> is replaced by the URL you just copied.
K depends on version 4.8.15 of Z3, which may not be supplied by package
managers. If this is the case, it should be built and installed from source
following the
instructions in
the Z3 repository. Other versions (older and newer) are not supported by K,
and may lead to incorrect behaviour or performance issues.

Downloading Packages

Download the appropriate package from the GitHub, via the
Releases page.
Releases are generated as often as possible from master build.

Installing Packages

On Linux systems, K will typically be installed under /usr.
On macOS/brew, K will typically be installed under /usr/local.

Ubuntu Jammy (22.04)

sudo apt install ./kframework_amd64_ubuntu_jammy.deb

macOS (Homebrew)

Homebrew (or just brew) is a third-party package manager
for MacOS.
If you have not installed brew, you must do so before installing the K
Framework brew package.

With brew installed, do the following to install the K Framework brew package
(with build number BN):

brew install kframework--X.Y.Z.ID.bottle.BN.tar.gz -v

Homebrew Alternate Installation

To directly install the latest K Framework brew package without needing to
download it separately, do the following:

brew install runtimeverification/k/kframework

Or, to streamline future K Framework upgrades, you can tap the K Framework
package repository. This lets future installations/upgrades/etc... use the
unprefixed package name.

brew tap runtimeverification/k
brew install kframework

Docker Images

Docker images with K pre-installed are available at the
runtimeverification/kframework-k Docker Hub repository.

Each release at COMMIT_ID has an image associated with it at
runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID.

To run the image directly:

docker run -it runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

and to make a Docker Image based on it, use the following line in your
Dockerfile:

FROM runtimeverificationinc/kframework-k:ubuntu-jammy-COMMIT_ID

We also create Ubuntu 22.04 images with the ubuntu-jammy-COMMIT_ID tags.

Testing Packages

The easiest way to test the K package is to copy a K tutorial language and
check if you can compile and run an included example.

Start by cloning the K tutorial from the K PL Tutorial. This command typically will be like:
```
$ git clone https://www.github.com/runtimeverification/pl-tutorial
```

Now you can try to run some programs:

$ cd pl-tutorial/2_languages/1_simple/1_untyped
$ make kompile
$ krun tests/diverse/factorial.simple

Assets 6

Releases: runtimeverification/k

K Framework Release v7.1.192

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

Install through packages

Pre-installation Notes

Downloading Packages

Installing Packages

Ubuntu Jammy (22.04)

macOS (Homebrew)

Homebrew Alternate Installation

Docker Images

Testing Packages

K Framework Release v7.1.191

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

Install through packages

Pre-installation Notes

Downloading Packages

Installing Packages

Ubuntu Jammy (22.04)

macOS (Homebrew)

Homebrew Alternate Installation

Docker Images

Testing Packages

K Framework Release v7.1.190

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

Install through packages

Pre-installation Notes

Downloading Packages

Installing Packages

Ubuntu Jammy (22.04)

macOS (Homebrew)

Homebrew Alternate Installation

Docker Images

Testing Packages

K Framework Release v7.1.188

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

Install through packages

Pre-installation Notes

Downloading Packages

Installing Packages

Ubuntu Jammy (22.04)

macOS (Homebrew)

Homebrew Alternate Installation

Docker Images

Testing Packages

K Framework Release v7.1.187

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

Install through packages

Pre-installation Notes

Downloading Packages

Installing Packages

Ubuntu Jammy (22.04)

macOS (Homebrew)

Homebrew Alternate Installation

Docker Images

Testing Packages

K Framework Release v7.1.186

copyright: Copyright (c) Runtime Verification, Inc. All Rights Reserved.

Installing the K Framework

Fast Installation (preferred)

Install through packages

Pre-installation Notes

Downloading Packages

Installing Packages

Ubuntu Jammy (22.04)

macOS (Homebrew)

Homebrew Alternate Installation

Docker Images

Testing Packages

K Framework Release v7.1.185