🧑‍💻 EXTRUDER_LOOP macro

Marlin/src/feature/fwretract.cpp

@@ -73,10 +73,10 @@ void FWRetract::reset() {
   settings.swap_retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE_SWAP;
   current_hop = 0.0;
 
-  LOOP_L_N(i, EXTRUDERS) {
-    retracted[i] = false;
-    E_TERN_(retracted_swap[i] = false);
-    current_retract[i] = 0.0;
+  EXTRUDER_LOOP() {
+    retracted[e] = false;
+    E_TERN_(retracted_swap[e] = false);
+    current_retract[e] = 0.0;
   }
 }
 
@@ -111,10 +111,10 @@ void FWRetract::retract(const bool retracting E_OPTARG(bool swapping/*=false*/))
       " swapping ", swapping,
       " active extruder ", active_extruder
     );
-    LOOP_L_N(i, EXTRUDERS) {
-      SERIAL_ECHOLNPGM("retracted[", i, "] ", AS_DIGIT(retracted[i]));
+    EXTRUDER_LOOP() {
+      SERIAL_ECHOLNPGM("retracted[", e, "] ", AS_DIGIT(retracted[e]));
       #if HAS_MULTI_EXTRUDER
-        SERIAL_ECHOLNPGM("retracted_swap[", i, "] ", AS_DIGIT(retracted_swap[i]));
+        SERIAL_ECHOLNPGM("retracted_swap[", e, "] ", AS_DIGIT(retracted_swap[e]));
       #endif
     }
     SERIAL_ECHOLNPGM("current_position.z ", current_position.z);
@@ -184,10 +184,10 @@ void FWRetract::retract(const bool retracting E_OPTARG(bool swapping/*=false*/))
     SERIAL_ECHOLNPGM("retracting ", AS_DIGIT(retracting));
     SERIAL_ECHOLNPGM("swapping ", AS_DIGIT(swapping));
     SERIAL_ECHOLNPGM("active_extruder ", active_extruder);
-    LOOP_L_N(i, EXTRUDERS) {
-      SERIAL_ECHOLNPGM("retracted[", i, "] ", AS_DIGIT(retracted[i]));
+    EXTRUDER_LOOP() {
+      SERIAL_ECHOLNPGM("retracted[", e, "] ", AS_DIGIT(retracted[e]));
       #if HAS_MULTI_EXTRUDER
-        SERIAL_ECHOLNPGM("retracted_swap[", i, "] ", AS_DIGIT(retracted_swap[i]));
+        SERIAL_ECHOLNPGM("retracted_swap[", e, "] ", AS_DIGIT(retracted_swap[e]));
       #endif
     }
     SERIAL_ECHOLNPGM("current_position.z ", current_position.z);

Marlin/src/feature/fwretract.h

@@ -64,7 +64,7 @@ class FWRetract {
   static void reset();
 
   static void refresh_autoretract() {
-    LOOP_L_N(i, EXTRUDERS) retracted[i] = false;
+    EXTRUDER_LOOP() retracted[e] = false;
   }
 
   static void enable_autoretract(const bool enable) {

Marlin/src/feature/powerloss.cpp

@@ -196,7 +196,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POW
     #if DISABLED(NO_VOLUMETRICS)
       info.flag.volumetric_enabled = parser.volumetric_enabled;
       #if HAS_MULTI_EXTRUDER
-        for (int8_t e = 0; e < EXTRUDERS; e++) info.filament_size[e] = planner.filament_size[e];
+        EXTRUDER_LOOP() info.filament_size[e] = planner.filament_size[e];
       #else
         if (parser.volumetric_enabled) info.filament_size[0] = planner.filament_size[active_extruder];
       #endif
@@ -461,7 +461,7 @@ void PrintJobRecovery::resume() {
   // Recover volumetric extrusion state
   #if DISABLED(NO_VOLUMETRICS)
     #if HAS_MULTI_EXTRUDER
-      for (int8_t e = 0; e < EXTRUDERS; e++) {
+      EXTRUDER_LOOP() {
         sprintf_P(cmd, PSTR("M200T%iD%s"), e, dtostrf(info.filament_size[e], 1, 3, str_1));
         gcode.process_subcommands_now(cmd);
       }
@@ -511,7 +511,7 @@ void PrintJobRecovery::resume() {
 
   // Restore retract and hop state from an active `G10` command
   #if ENABLED(FWRETRACT)
-    LOOP_L_N(e, EXTRUDERS) {
+    EXTRUDER_LOOP() {
       if (info.retract[e] != 0.0) {
         fwretract.current_retract[e] = info.retract[e];
         fwretract.retracted[e] = true;
@@ -634,7 +634,7 @@ void PrintJobRecovery::resume() {
 
         #if DISABLED(NO_VOLUMETRICS)
           DEBUG_ECHOPGM("filament_size:");
-          LOOP_L_N(i, EXTRUDERS) DEBUG_ECHOLNPGM(" ", info.filament_size[i]);
+          EXTRUDER_LOOP() DEBUG_ECHOLNPGM(" ", info.filament_size[e]);
           DEBUG_EOL();
         #endif
 
@@ -666,7 +666,7 @@ void PrintJobRecovery::resume() {
 
         #if ENABLED(FWRETRACT)
           DEBUG_ECHOPGM("retract: ");
-          for (int8_t e = 0; e < EXTRUDERS; e++) {
+          EXTRUDER_LOOP() {
             DEBUG_ECHO(info.retract[e]);
             if (e < EXTRUDERS - 1) DEBUG_CHAR(',');
           }

Marlin/src/gcode/config/M200-M205.cpp

@@ -93,12 +93,12 @@
     }
     #else
       SERIAL_ECHOLNPGM("  M200 S", parser.volumetric_enabled);
-      LOOP_L_N(i, EXTRUDERS) {
+      EXTRUDER_LOOP() {
         report_echo_start(forReplay);
         SERIAL_ECHOLNPGM(
-          "  M200 T", i, " D", LINEAR_UNIT(planner.filament_size[i])
+          "  M200 T", e, " D", LINEAR_UNIT(planner.filament_size[e])
           #if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
-            , " L", LINEAR_UNIT(planner.volumetric_extruder_limit[i])
+            , " L", LINEAR_UNIT(planner.volumetric_extruder_limit[e])
           #endif
         );
       }

Marlin/src/gcode/control/M17_M18_M84.cpp

@@ -77,7 +77,7 @@ void do_enable(const axis_flags_t to_enable) {
     }
   }
   #if HAS_EXTRUDERS
-    LOOP_L_N(e, EXTRUDERS) {
+    EXTRUDER_LOOP() {
       const uint8_t a = INDEX_OF_AXIS(E_AXIS, e);
       if (TEST(shall_enable, a)) {
         stepper.ENABLE_EXTRUDER(e);
@@ -161,7 +161,7 @@ void try_to_disable(const axis_flags_t to_disable) {
       DEBUG_ECHOLNPGM(" ... still_enabled=", hex_word(still_enabled));
     }
   #if HAS_EXTRUDERS
-    LOOP_L_N(e, EXTRUDERS) {
+    EXTRUDER_LOOP() {
       const uint8_t a = INDEX_OF_AXIS(E_AXIS, e);
       if (TEST(to_disable.bits, a)) {
         DEBUG_ECHOPGM("Try to disable E", AS_DIGIT(e), " (", a, ") with overlap ", hex_word(enable_overlap[a]), " ... ");
@@ -194,7 +194,7 @@ void try_to_disable(const axis_flags_t to_disable) {
     }
   }
   #if HAS_EXTRUDERS
-    LOOP_L_N(e, EXTRUDERS) {
+    EXTRUDER_LOOP() {
       const uint8_t a = INDEX_OF_AXIS(E_AXIS, e);
       if (TEST(still_enabled, a)) {
         SERIAL_CHAR('E', '0' + e);

Marlin/src/gcode/feature/advance/M900.cpp

@@ -117,10 +117,10 @@ void GcodeSuite::M900() {
       #if EXTRUDERS < 2
         SERIAL_ECHOLNPGM("Advance S", new_slot, " K", kref, "(S", !new_slot, " K", lref, ")");
       #else
-        LOOP_L_N(i, EXTRUDERS) {
-          const bool slot = TEST(lin_adv_slot, i);
-          SERIAL_ECHOLNPGM("Advance T", i, " S", slot, " K", planner.extruder_advance_K[i],
-                            "(S", !slot, " K", other_extruder_advance_K[i], ")");
+        EXTRUDER_LOOP() {
+          const bool slot = TEST(lin_adv_slot, e);
+          SERIAL_ECHOLNPGM("Advance T", e, " S", slot, " K", planner.extruder_advance_K[e],
+                            "(S", !slot, " K", other_extruder_advance_K[e], ")");
           SERIAL_EOL();
         }
       #endif
@@ -132,9 +132,9 @@ void GcodeSuite::M900() {
         SERIAL_ECHOLNPGM("Advance K=", planner.extruder_advance_K[0]);
       #else
         SERIAL_ECHOPGM("Advance K");
-        LOOP_L_N(i, EXTRUDERS) {
-          SERIAL_CHAR(' ', '0' + i, ':');
-          SERIAL_DECIMAL(planner.extruder_advance_K[i]);
+        EXTRUDER_LOOP() {
+          SERIAL_CHAR(' ', '0' + e, ':');
+          SERIAL_DECIMAL(planner.extruder_advance_K[e]);
         }
         SERIAL_EOL();
       #endif
@@ -150,9 +150,9 @@ void GcodeSuite::M900_report(const bool forReplay/*=true*/) {
     report_echo_start(forReplay);
     SERIAL_ECHOLNPGM("  M900 K", planner.extruder_advance_K[0]);
   #else
-    LOOP_L_N(i, EXTRUDERS) {
+    EXTRUDER_LOOP() {
       report_echo_start(forReplay);
-      SERIAL_ECHOLNPGM("  M900 T", i, " K", planner.extruder_advance_K[i]);
+      SERIAL_ECHOLNPGM("  M900 T", e, " K", planner.extruder_advance_K[e]);
     }
   #endif
 }

Marlin/src/gcode/feature/pause/M603.cpp

@@ -72,7 +72,7 @@ void GcodeSuite::M603_report(const bool forReplay/*=true*/) {
     SERIAL_ECHOPGM("  M603 L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length), " ;");
     say_units();
   #else
-    LOOP_L_N(e, EXTRUDERS) {
+    EXTRUDER_LOOP() {
       report_echo_start(forReplay);
       SERIAL_ECHOPGM("  M603 T", e, " L", LINEAR_UNIT(fc_settings[e].load_length), " U", LINEAR_UNIT(fc_settings[e].unload_length), " ;");
       say_units();

Marlin/src/inc/Conditionals_LCD.h

@@ -749,6 +749,7 @@
 #endif
 
 // Helper macros for extruder and hotend arrays
+#define EXTRUDER_LOOP() for (int8_t e = 0; e < EXTRUDERS; e++)
 #define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++)
 #define ARRAY_BY_EXTRUDERS(V...) ARRAY_N(EXTRUDERS, V)
 #define ARRAY_BY_EXTRUDERS1(v1) ARRAY_N_1(EXTRUDERS, v1)

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -109,8 +109,8 @@ void menu_backlash();
       #if EXTRUDERS == 1
         EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
       #elif HAS_MULTI_EXTRUDER
-        LOOP_L_N(n, EXTRUDERS)
-          EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 10);
+        EXTRUDER_LOOP()
+          EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
       #endif
     #endif
 
@@ -120,16 +120,16 @@ void menu_backlash();
       #if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
         EDIT_ITEM_FAST(float42_52, MSG_VOLUMETRIC_LIMIT, &planner.volumetric_extruder_limit[active_extruder], 0.0f, 20.0f, planner.calculate_volumetric_extruder_limits);
         #if HAS_MULTI_EXTRUDER
-          LOOP_L_N(n, EXTRUDERS)
-            EDIT_ITEM_FAST_N(float42_52, n, MSG_VOLUMETRIC_LIMIT_E, &planner.volumetric_extruder_limit[n], 0.0f, 20.00f, planner.calculate_volumetric_extruder_limits);
+          EXTRUDER_LOOP()
+            EDIT_ITEM_FAST_N(float42_52, e, MSG_VOLUMETRIC_LIMIT_E, &planner.volumetric_extruder_limit[e], 0.0f, 20.00f, planner.calculate_volumetric_extruder_limits);
         #endif
       #endif
 
       if (parser.volumetric_enabled) {
         EDIT_ITEM_FAST(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
         #if HAS_MULTI_EXTRUDER
-          LOOP_L_N(n, EXTRUDERS)
-            EDIT_ITEM_FAST_N(float43, n, MSG_FILAMENT_DIAM_E, &planner.filament_size[n], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
+          EXTRUDER_LOOP()
+            EDIT_ITEM_FAST_N(float43, e, MSG_FILAMENT_DIAM_E, &planner.filament_size[e], 1.5f, 3.25f, planner.calculate_volumetric_multipliers);
         #endif
       }
     #endif
@@ -139,14 +139,14 @@ void menu_backlash();
 
       EDIT_ITEM_FAST(float4, MSG_FILAMENT_UNLOAD, &fc_settings[active_extruder].unload_length, 0, extrude_maxlength);
       #if HAS_MULTI_EXTRUDER
-        LOOP_L_N(n, EXTRUDERS)
-          EDIT_ITEM_FAST_N(float4, n, MSG_FILAMENTUNLOAD_E, &fc_settings[n].unload_length, 0, extrude_maxlength);
+        EXTRUDER_LOOP()
+          EDIT_ITEM_FAST_N(float4, e, MSG_FILAMENTUNLOAD_E, &fc_settings[e].unload_length, 0, extrude_maxlength);
       #endif
 
       EDIT_ITEM_FAST(float4, MSG_FILAMENT_LOAD, &fc_settings[active_extruder].load_length, 0, extrude_maxlength);
       #if HAS_MULTI_EXTRUDER
-        LOOP_L_N(n, EXTRUDERS)
-          EDIT_ITEM_FAST_N(float4, n, MSG_FILAMENTLOAD_E, &fc_settings[n].load_length, 0, extrude_maxlength);
+        EXTRUDER_LOOP()
+          EDIT_ITEM_FAST_N(float4, e, MSG_FILAMENTLOAD_E, &fc_settings[e].load_length, 0, extrude_maxlength);
       #endif
     #endif
 

Marlin/src/lcd/menu/menu_configuration.cpp

@@ -145,9 +145,9 @@ void menu_advanced_settings();
       EDIT_ITEM(uint8, MSG_TOOL_MIGRATION_END, &migration.last, 0, EXTRUDERS - 1);
 
       // Migrate to a chosen extruder
-      LOOP_L_N(s, EXTRUDERS) {
-        if (s != active_extruder) {
-          ACTION_ITEM_N_P(s, msg_migrate, []{
+      EXTRUDER_LOOP() {
+        if (e != active_extruder) {
+          ACTION_ITEM_N_P(e, msg_migrate, []{
             char cmd[12];
             sprintf_P(cmd, PSTR("M217 T%i"), int(MenuItemBase::itemIndex));
             queue.inject(cmd);

Marlin/src/lcd/menu/menu_mmu2.cpp

@@ -48,22 +48,22 @@ void _mmu2_load_filament(uint8_t index) {
   ui.reset_status();
 }
 void action_mmu2_load_all() {
-  LOOP_L_N(i, EXTRUDERS) _mmu2_load_filament(i);
+  EXTRUDER_LOOP() _mmu2_load_filament(e);
   ui.return_to_status();
 }
 
 void menu_mmu2_load_filament() {
   START_MENU();
   BACK_ITEM(MSG_MMU2_MENU);
   ACTION_ITEM(MSG_MMU2_ALL, action_mmu2_load_all);
-  LOOP_L_N(i, EXTRUDERS) ACTION_ITEM_N(i, MSG_MMU2_FILAMENT_N, []{ _mmu2_load_filament(MenuItemBase::itemIndex); });
+  EXTRUDER_LOOP() ACTION_ITEM_N(e, MSG_MMU2_FILAMENT_N, []{ _mmu2_load_filament(MenuItemBase::itemIndex); });
   END_MENU();
 }
 
 void menu_mmu2_load_to_nozzle() {
   START_MENU();
   BACK_ITEM(MSG_MMU2_MENU);
-  LOOP_L_N(i, EXTRUDERS) ACTION_ITEM_N(i, MSG_MMU2_FILAMENT_N, []{ action_mmu2_load_filament_to_nozzle(MenuItemBase::itemIndex); });
+  EXTRUDER_LOOP() ACTION_ITEM_N(e, MSG_MMU2_FILAMENT_N, []{ action_mmu2_load_filament_to_nozzle(MenuItemBase::itemIndex); });
   END_MENU();
 }
 
@@ -89,7 +89,7 @@ void action_mmu2_unload_filament() {
 void menu_mmu2_eject_filament() {
   START_MENU();
   BACK_ITEM(MSG_MMU2_MENU);
-  LOOP_L_N(i, EXTRUDERS) ACTION_ITEM_N(i, MSG_MMU2_FILAMENT_N, []{ _mmu2_eject_filament(MenuItemBase::itemIndex); });
+  EXTRUDER_LOOP() ACTION_ITEM_N(e, MSG_MMU2_FILAMENT_N, []{ _mmu2_eject_filament(MenuItemBase::itemIndex); });
   END_MENU();
 }
 
@@ -130,7 +130,7 @@ void menu_mmu2_choose_filament() {
   #if LCD_HEIGHT > 2
     STATIC_ITEM(MSG_MMU2_CHOOSE_FILAMENT_HEADER, SS_DEFAULT|SS_INVERT);
   #endif
-  LOOP_L_N(i, EXTRUDERS) ACTION_ITEM_N(i, MSG_MMU2_FILAMENT_N, []{ action_mmu2_chosen(MenuItemBase::itemIndex); });
+  EXTRUDER_LOOP() ACTION_ITEM_N(e, MSG_MMU2_FILAMENT_N, []{ action_mmu2_chosen(MenuItemBase::itemIndex); });
   END_MENU();
 }
 

Marlin/src/lcd/menu/menu_tune.cpp

@@ -199,8 +199,8 @@ void menu_tune() {
     EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, []{ planner.refresh_e_factor(active_extruder); });
     // Flow En:
     #if HAS_MULTI_EXTRUDER
-      LOOP_L_N(n, EXTRUDERS)
-        EDIT_ITEM_N(int3, n, MSG_FLOW_N, &planner.flow_percentage[n], 10, 999, []{ planner.refresh_e_factor(MenuItemBase::itemIndex); });
+      EXTRUDER_LOOP()
+        EDIT_ITEM_N(int3, e, MSG_FLOW_N, &planner.flow_percentage[e], 10, 999, []{ planner.refresh_e_factor(MenuItemBase::itemIndex); });
     #endif
   #endif
 
@@ -211,8 +211,8 @@ void menu_tune() {
     #if EXTRUDERS == 1
       EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 10);
     #elif HAS_MULTI_EXTRUDER
-      LOOP_L_N(n, EXTRUDERS)
-        EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 10);
+      EXTRUDER_LOOP()
+        EDIT_ITEM_N(float42_52, e, MSG_ADVANCE_K_E, &planner.extruder_advance_K[e], 0, 10);
     #endif
   #endif
 

Marlin/src/module/planner.cpp

@@ -1505,7 +1505,7 @@ void Planner::check_axes_activity() {
     volumetric_extruder_feedrate_limit[e] = (lim && siz) ? lim / CIRCLE_AREA(siz * 0.5f) : 0;
   }
   void Planner::calculate_volumetric_extruder_limits() {
-    LOOP_L_N(e, EXTRUDERS) calculate_volumetric_extruder_limit(e);
+    EXTRUDER_LOOP() calculate_volumetric_extruder_limit(e);
   }
 
 #endif

Marlin/src/module/planner.h

@@ -928,8 +928,8 @@ class Planner {
     #if HAS_LINEAR_E_JERK
       FORCE_INLINE static void recalculate_max_e_jerk() {
         const float prop = junction_deviation_mm * SQRT(0.5) / (1.0f - SQRT(0.5));
-        LOOP_L_N(i, EXTRUDERS)
-          max_e_jerk[E_INDEX_N(i)] = SQRT(prop * settings.max_acceleration_mm_per_s2[E_INDEX_N(i)]);
+        EXTRUDER_LOOP()
+          max_e_jerk[E_INDEX_N(e)] = SQRT(prop * settings.max_acceleration_mm_per_s2[E_INDEX_N(e)]);
       }
     #endif
 

Marlin/src/module/settings.cpp

@@ -3138,9 +3138,9 @@ void MarlinSettings::reset() {
   //
 
   #if ENABLED(LIN_ADVANCE)
-    LOOP_L_N(i, EXTRUDERS) {
-      planner.extruder_advance_K[i] = LIN_ADVANCE_K;
-      TERN_(EXTRA_LIN_ADVANCE_K, other_extruder_advance_K[i] = LIN_ADVANCE_K);
+    EXTRUDER_LOOP() {
+      planner.extruder_advance_K[e] = LIN_ADVANCE_K;
+      TERN_(EXTRA_LIN_ADVANCE_K, other_extruder_advance_K[e] = LIN_ADVANCE_K);
     }
   #endif
 
@@ -3185,7 +3185,7 @@ void MarlinSettings::reset() {
   // Advanced Pause filament load & unload lengths
   //
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
-    LOOP_L_N(e, EXTRUDERS) {
+    EXTRUDER_LOOP() {
       fc_settings[e].unload_length = FILAMENT_CHANGE_UNLOAD_LENGTH;
       fc_settings[e].load_length = FILAMENT_CHANGE_FAST_LOAD_LENGTH;
     }