Skip to content

The Ada Conformity Assessment Test Suite, customised for GCC.

License

Notifications You must be signed in to change notification settings

simonjwright/ACATS

Repository files navigation

ACATS

This repository contains a version of the Ada Conformity Assessment Test Suite customised for use with FSF GCC. They can be used instead of the current GCC tests (based on ACATS 2.6).

The current version here is 4.2A.

Notes

To run the tests, you'll need expect (and tcl) installed.

Test changes

Test CXH1001 as released fails; if the GNAT binder encounters the configuration pragma Normalize_Scalars, it requires all the units in the partition to have been compiled with it, including the runtime system. Replaced here by the GNAT-specific Initialize_Scalars.

Some individual tests are in any case suppressed (by inclusion in the file norun.lst), because they involve another language (Fortran, Cobol).

The tests that involve timing mostly included very long timeouts (up to an hour in some cases), which were scaled here (as in the GCC version) by multiplying by One_Nominal_Second (0.001 seconds) or One_Nominal_Long_Second (0.1 seconds). This problem was corrected in ACATS 4.1M, and the code here matches the official version.

Testing in GCC

You can run the GCC checks with this version of the tests (provided you have dejagnu installed as well as expect) by replacing gcc/testsuite/ada/acats in the source tree by (a link to) this code and then, in the gcc directory of the build tree, run make check-acats. (You can also run make check-gnat for the GNAT tests, or make check-ada for both).

You can run the tests in parallel, which of course makes most sense if you have multiple cores, by for example make -j4 check-acats. If you do this, the screen output during execution is misleading; only the final acats.log and acats.sum in <build-dir>/gcc/testsuite/ada/acats/ are meaningful.

The default compiler options are -gnatws -g -O2 (-gnat2012 is always added). You can pass additional options using the RUNTESTFLAGS feature:

make check-acats RUNTESTFLAGS="--target_board=unix/-O3/-gnatN"

runs the tests with -gnatws -gnatN -g -O2 -O3.

If you wish to pass any GNAT-specific options (e.g. -gnat*) you must only run this suite (make check-acats), because -gnat* will fail with most other tools (unrecognized debug output level 'nat*').

Don't use RUNTESTFLAGS with -j<n>: it doesn't get passed to sub-makes (as of 2018-02-10).

Local testing

You can also run the tests, or individual chapters of the tests, by using the run_local.sh script (from a different directory). For example,

mkdir ~/tmp/acats
cd ~/tmp/acats
~/ACATS/run_local.sh cxd cxe

(assuming this repository is installed at ~/ACATS) will run just chapters CXD, CXE (execution tests on Annexes D and E), using the current compiler. With no arguments, all tests are run.

If you only want to run the execution tests (i.e. not the B tests, which check that compilation errors are detected, and are many),

~/ACATS/run_local.sh $(cd ~/ACATS/tests; ls -d [ac-z]*)

The above commands will only build the support code if it isn't already built. To force a rebuild, say

~/ACATS/run_local.sh NONE cxd cxe

Reports

The reports are in acats.log and acats.sum.

acats.log is a full report of test compilation, build and execution.

acats.sum is a report of just the outcome of each test and a summary.

The outcomes are reported in the style OUTCOME: test, e.g. PASS: a22006b, where the possible outcomes are

  • PASS: the test passed
  • FAIL: the test was expected to pass but failed
  • XFAIL: the test was expected to fail and did so
  • XPASS: the test was expected to fail but passed
  • UNRESOLVED: the test requires visual examination to finally determine pass/fail
  • UNSUPPORTED: the test was either deemed not applicable by the test itself (for example, C45322A requires Machine_Overflows to be True), not supported by the compiler (for example, CXAG002 will not compile because it requires support for Hierarchical_File_Names), or not compatible with simple use of gnatchop (because the test contains the same unit in several source files, expecting them to be used in multiple passes).

Note, these outcome names are not ideal, but they have to match the requirements of the GCC test infrastructure that supports parallel test execution.

The summary is reported in the form below (this is for ACATS 4.1BB, running under GCC 12.2.0 on macOS)

        === acats Summary ===
# of expected passes		2544
# of unexpected failures	10
# of expected failures		1493
# of unresolved testcases	11
# of unsupported tests		124
*** FAILURES: c250002 c324006 c415001 cxa4038 cxd1003 cxd1004 cxd1005 cxd2006 cxd3001 cxd3002

About

The Ada Conformity Assessment Test Suite, customised for GCC.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages