Pr/nucleo f767 zi codedoc

.github/workflows/test-builds.yml

@@ -70,6 +70,7 @@ jobs:
         - mks_robin_stm32
         - ARMED
         - FYSETC_S6
+        - STM32F070CB_malyan
         - STM32F070RB_malyan
         - malyan_M300
         - mks_robin_lite

Marlin/Configuration.h

@@ -177,7 +177,7 @@
 #endif
 
 /**
- * Prusa Multi-Material Unit v2
+ * Průša Multi-Material Unit v2
  *
  * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  * Requires EXTRUDERS = 5
@@ -373,7 +373,7 @@
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
  *   501 : 100K Zonestar (Tronxy X3A) Thermistor
- *   502 : 100K Zonestar Thermistor used by hot bed in Zonestar Prusa P802M
+ *   502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
  *   512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
@@ -608,14 +608,15 @@
 
 // @section machine
 
-// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
+// Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
 //#define COREXY
 //#define COREXZ
 //#define COREYZ
 //#define COREYX
 //#define COREZX
 //#define COREZY
+//#define MARKFORGED_XY  // MarkForged. See https://reprap.org/forum/read.php?152,504042
 
 //===========================================================================
 //============================== Endstop Settings ===========================
@@ -1604,9 +1605,12 @@
   // Move the nozzle to the initial position after cleaning
   #define NOZZLE_CLEAN_GOBACK
 
-  // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
+  // For a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
 
+  // For a purge/clean station mounted on the X axis
+  //#define NOZZLE_CLEAN_NO_Y
+
   // Explicit wipe G-code script applies to a G12 with no arguments.
   //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
 
@@ -1686,7 +1690,7 @@
  * Select the language to display on the LCD. These languages are available:
  *
  *   en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, hu, it,
- *   jp_kana, ko_KR, nl, pl, pt, pt_br, ro ru, sk, tr, uk, vi, zh_CN, zh_TW, test
+ *   jp_kana, ko_KR, nl, pl, pt, pt_br, ro, ru, sk, tr, uk, vi, zh_CN, zh_TW, test
  *
  * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'hu':'Hungarian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ro':'Romanian', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  */
@@ -1717,9 +1721,9 @@
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
 /**
- * Info Screen Style (0:Classic, 1:Prusa)
+ * Info Screen Style (0:Classic, 1:Průša)
  *
- * :[0:'Classic', 1:'Prusa']
+ * :[0:'Classic', 1:'Průša']
  */
 #define LCD_INFO_SCREEN_STYLE 0
 
@@ -2059,7 +2063,7 @@
 //#define FYSETC_MINI_12864_X_X    // Type C/D/E/F. No tunable RGB Backlight by default
 //#define FYSETC_MINI_12864_1_2    // Type C/D/E/F. Simple RGB Backlight (always on)
 //#define FYSETC_MINI_12864_2_0    // Type A/B. Discreet RGB Backlight
-//#define FYSETC_MINI_12864_2_1    // Type A/B. Neopixel RGB Backlight
+//#define FYSETC_MINI_12864_2_1    // Type A/B. NeoPixel RGB Backlight
 //#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
 
 //
@@ -2329,13 +2333,13 @@
  * Adds the M150 command to set the LED (or LED strip) color.
  * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  * luminance values can be set from 0 to 255.
- * For Neopixel LED an overall brightness parameter is also available.
+ * For NeoPixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
  *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
- *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
+ *  NOTE: A separate 5V power supply is required! The NeoPixel LED needs
  *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
@@ -2352,20 +2356,29 @@
   //#define RGB_LED_W_PIN -1
 #endif
 
-// Support for Adafruit Neopixel LED driver
+// Support for Adafruit NeoPixel LED driver
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
   #define NEOPIXEL_PIN     4       // LED driving pin
   //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
   //#define NEOPIXEL2_PIN    5
-  //#define NEOPIXEL2_INSERIES     // Default behavior is NeoPixel 2 in parallel
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
+  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
   #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
   #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
   //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
 
-  // Use a single Neopixel LED for static (background) lighting
+  // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ...
+  //#define NEOPIXEL2_SEPARATE
+  #if ENABLED(NEOPIXEL2_SEPARATE)
+    #define NEOPIXEL2_PIXELS      15  // Number of LEDs in the second strip
+    #define NEOPIXEL2_BRIGHTNESS 127  // Initial brightness (0-255)
+    #define NEOPIXEL2_STARTUP_TEST    // Cycle through colors at startup
+  #else
+    //#define NEOPIXEL2_INSERIES      // Default behavior is NeoPixel 2 in parallel
+  #endif
+
+  // Use a single NeoPixel LED for static (background) lighting
   //#define NEOPIXEL_BKGD_LED_INDEX  0               // Index of the LED to use
   //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
 #endif

Marlin/Configuration_adv.h

@@ -488,7 +488,7 @@
   //#define CASE_LIGHT_MAX_PWM 128            // Limit pwm
   //#define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
   //#define CASE_LIGHT_NO_BRIGHTNESS          // Disable brightness control. Enable for non-PWM lighting.
-  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use NeoPixel LED as case light, requires NEOPIXEL_LED.
   #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
     #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
   #endif
@@ -909,9 +909,9 @@
 
   #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
 
-  #define CALIBRATION_FEEDRATE_SLOW             60    // mm/m
-  #define CALIBRATION_FEEDRATE_FAST           1200    // mm/m
-  #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/m
+  #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
+  #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
+  #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
 
   // The following parameters refer to the conical section of the nozzle tip.
   #define CALIBRATION_NOZZLE_TIP_HEIGHT          1.0  // mm
@@ -1065,6 +1065,7 @@
   //#define LED_CONTROL_MENU
   #if ENABLED(LED_CONTROL_MENU)
     #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+    //#define NEO2_COLOR_PRESETS              // Enable a second NeoPixel Preset Color menu option
     #if ENABLED(LED_COLOR_PRESETS)
       #define LED_USER_PRESET_RED        255  // User defined RED value
       #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
@@ -1073,6 +1074,14 @@
       #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
       //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
     #endif
+    #if ENABLED(NEO2_COLOR_PRESETS)
+      #define NEO2_USER_PRESET_RED        255  // User defined RED value
+      #define NEO2_USER_PRESET_GREEN      128  // User defined GREEN value
+      #define NEO2_USER_PRESET_BLUE         0  // User defined BLUE value
+      #define NEO2_USER_PRESET_WHITE      255  // User defined WHITE value
+      #define NEO2_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+      //#define NEO2_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup for the second strip
+    #endif
   #endif
 
 #endif // HAS_LCD_MENU
@@ -2424,7 +2433,7 @@
    * CHOPPER_DEFAULT_24V
    * CHOPPER_DEFAULT_36V
    * CHOPPER_09STEP_24V   // 0.9 degree steppers (24V)
-   * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+   * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Průša firmware for MK3 (24V)
    * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
    *
    * Define you own with
@@ -2478,7 +2487,7 @@
   #define E7_HYBRID_THRESHOLD     30
 
   /**
-   * Use StallGuard2 to home / probe X, Y, Z.
+   * Use StallGuard to home / probe X, Y, Z.
    *
    * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
    * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
@@ -2499,6 +2508,8 @@
    *
    * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
    * homing and adds a guard period for endstop triggering.
+   *
+   * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis.
    */
   //#define SENSORLESS_HOMING // StallGuard capable drivers only
 
@@ -3396,7 +3407,7 @@
 #endif
 
 /**
- * Prusa Multi-Material Unit v2
+ * Průša Multi-Material Unit v2
  * Enable in Configuration.h
  */
 #if ENABLED(PRUSA_MMU2)
@@ -3420,7 +3431,7 @@
   //#define MMU2_MENUS
   #if ENABLED(MMU2_MENUS)
     // Settings for filament load / unload from the LCD menu.
-    // This is for Prusa MK3-style extruders. Customize for your hardware.
+    // This is for Průša MK3-style extruders. Customize for your hardware.
     #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
     #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
       {  7.2, 1145 }, \
@@ -3446,7 +3457,7 @@
   /**
    * MMU Extruder Sensor
    *
-   * Support for a Prusa (or other) IR Sensor to detect filament near the extruder
+   * Support for a Průša (or other) IR Sensor to detect filament near the extruder
    * and make loading more reliable. Suitable for an extruder equipped with a filament
    * sensor less than 38mm from the gears.
    *