_spacemacs

;; -*- mode: emacs-lisp -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.

(defun dotspacemacs/layers ()
  "Layer configuration:
This function should only modify configuration layer settings."
  (setq-default
   ;; Base distribution to use. This is a layer contained in the directory
   ;; `+distribution'. For now available distributions are `spacemacs-base'
   ;; or `spacemacs'. (default 'spacemacs)
   dotspacemacs-distribution 'spacemacs

   ;; Lazy installation of layers (i.e. layers are installed only when a file
   ;; with a supported type is opened). Possible values are `all', `unused'
   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
   ;; lazy install any layer that support lazy installation even the layers
   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
   ;; installation feature and you have to explicitly list a layer in the
   ;; variable `dotspacemacs-configuration-layers' to install it.
   ;; (default 'unused)
   dotspacemacs-enable-lazy-installation 'unused

   ;; If non-nil then Spacemacs will ask for confirmation before installing
   ;; a layer lazily. (default t)
   dotspacemacs-ask-for-lazy-installation t

   ;; If non-nil layers with lazy install support are lazy installed.
   ;; List of additional paths where to look for configuration layers.
   ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
   dotspacemacs-configuration-layer-path '()

   ;; List of configuration layers to load.
   dotspacemacs-configuration-layers
   '(
     ;; ----------------------------------------------------------------
     ;; Example of useful layers you may want to use right away.
     ;; Uncomment some layer names and press `SPC f e R' (Vim style) or
     ;; `M-m f e R' (Emacs style) to install them.
     ;; ----------------------------------------------------------------
     helm
     auto-completion
     better-defaults
     emacs-lisp
     python
     ;; git
     markdown
     neotree
     org
     ;; (shell :variables
     ;;        shell-default-height 30
     ;;        shell-default-position 'bottom)
     spell-checking
     syntax-checking
     ;; version-control
     )

   ;; List of additional packages that will be installed without being
   ;; wrapped in a layer. If you need some configuration for these
   ;; packages, then consider creating a layer. You can also put the
   ;; configuration in `dotspacemacs/user-config'.
   ;; To use a local version of a package, use the `:location' property:
   ;; '(your-package :location "~/path/to/your-package/")
   ;; Also include the dependencies as they will not be resolved automatically.
   dotspacemacs-additional-packages '()

   ;; A list of packages that cannot be updated.
   dotspacemacs-frozen-packages '()

   ;; A list of packages that will not be installed and loaded.
   dotspacemacs-excluded-packages '()

   ;; Defines the behaviour of Spacemacs when installing packages.
   ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
   ;; `used-only' installs only explicitly used packages and deletes any unused
   ;; packages as well as their unused dependencies. `used-but-keep-unused'
   ;; installs only the used packages but won't delete unused ones. `all'
   ;; installs *all* packages supported by Spacemacs and never uninstalls them.
   ;; (default is `used-only')
   dotspacemacs-install-packages 'used-only))

(defun dotspacemacs/init ()
  "Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
  ;; This setq-default sexp is an exhaustive list of all the supported
  ;; spacemacs settings.
  (setq-default
   ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
   ;; possible. Set it to nil if you have no way to use HTTPS in your
   ;; environment, otherwise it is strongly recommended to let it set to t.
   ;; This variable has no effect if Emacs is launched with the parameter
   ;; `--insecure' which forces the value of this variable to nil.
   ;; (default t)
   dotspacemacs-elpa-https t

   ;; Maximum allowed time in seconds to contact an ELPA repository.
   ;; (default 5)
   dotspacemacs-elpa-timeout 5

   ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
   ;; This is an advanced option and should not be changed unless you suspect
   ;; performance issues due to garbage collection operations.
   ;; (default '(100000000 0.1))
   dotspacemacs-gc-cons '(100000000 0.1)

   ;; If non-nil then Spacelpa repository is the primary source to install
   ;; a locked version of packages. If nil then Spacemacs will install the
   ;; latest version of packages from MELPA. (default nil)
   dotspacemacs-use-spacelpa nil

   ;; If non-nil then verify the signature for downloaded Spacelpa archives.
   ;; (default nil)
   dotspacemacs-verify-spacelpa-archives nil

   ;; If non-nil then spacemacs will check for updates at startup
   ;; when the current branch is not `develop'. Note that checking for
   ;; new versions works via git commands, thus it calls GitHub services
   ;; whenever you start Emacs. (default nil)
   dotspacemacs-check-for-update nil

   ;; If non-nil, a form that evaluates to a package directory. For example, to
   ;; use different package directories for different Emacs versions, set this
   ;; to `emacs-version'. (default 'emacs-version)
   dotspacemacs-elpa-subdirectory 'emacs-version

   ;; One of `vim', `emacs' or `hybrid'.
   ;; (default 'vim)
   dotspacemacs-editing-style 'vim

   ;; If non-nil output loading progress in `*Messages*' buffer. (default nil)
   dotspacemacs-verbose-loading nil

   ;; Specify the startup banner. Default value is `official', it displays
   ;; the official spacemacs logo. An integer value is the index of text
   ;; banner, `random' chooses a random text banner in `core/banners'
   ;; directory. A string value must be a path to an image format supported
   ;; by your Emacs build.
   ;; If the value is nil then no banner is displayed. (default 'official)
   dotspacemacs-startup-banner nil

   ;; List of items to show in startup buffer or an association list of
   ;; the form `(list-type . list-size)`. If nil then it is disabled.
   ;; Possible values for list-type are:
   ;; `recents' `bookmarks' `projects' `agenda' `todos'.
   ;; List sizes may be nil, in which case
   ;; `spacemacs-buffer-startup-lists-length' takes effect.
   dotspacemacs-startup-lists '((recents . 5)
                                (projects . 7)
                                (agenda . 2)
                                (todos . 2))

   ;; True if the home buffer should respond to resize events. (default t)
   dotspacemacs-startup-buffer-responsive t

   ;; Default major mode of the scratch buffer (default `text-mode')
   dotspacemacs-scratch-mode 'text-mode

   ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
   ;; (default nil)
   dotspacemacs-initial-scratch-message nil

   ;; List of themes, the first of the list is loaded when spacemacs starts.
   ;; Press `SPC T n' to cycle to the next theme in the list (works great
   ;; with 2 themes variants, one dark and one light)
   dotspacemacs-themes '(spacemacs-dark
                         spacemacs-light)

   ;; Set the theme for the Spaceline. Supported themes are `spacemacs',
   ;; `all-the-icons', `custom', `vim-powerline' and `vanilla'. The first three
   ;; are spaceline themes. `vanilla' is default Emacs mode-line. `custom' is a
   ;; user defined themes, refer to the DOCUMENTATION.org for more info on how
   ;; to create your own spaceline theme. Value can be a symbol or list with\
   ;; additional properties.
   ;; (default '(spacemacs :separator wave :separator-scale 1.5))
   dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)

   ;; If non-nil the cursor color matches the state color in GUI Emacs.
   ;; (default t)
   dotspacemacs-colorize-cursor-according-to-state t

   ;; Default font, or prioritized list of fonts. `powerline-scale' allows to
   ;; quickly tweak the mode-line size to make separators look not too crappy.
   dotspacemacs-default-font '("Source Code Pro"
                               :size 13
                               :weight normal
                               :width normal)

   ;; The leader key (default "SPC")
   dotspacemacs-leader-key "SPC"

   ;; The key used for Emacs commands `M-x' (after pressing on the leader key).
   ;; (default "SPC")
   dotspacemacs-emacs-command-key "SPC"

   ;; The key used for Vim Ex commands (default ":")
   dotspacemacs-ex-command-key ":"

   ;; The leader key accessible in `emacs state' and `insert state'
   ;; (default "M-m")
   dotspacemacs-emacs-leader-key "M-m"

   ;; Major mode leader key is a shortcut key which is the equivalent of
   ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
   dotspacemacs-major-mode-leader-key ","

   ;; Major mode leader key accessible in `emacs state' and `insert state'.
   ;; (default "C-M-m")
   dotspacemacs-major-mode-emacs-leader-key "C-M-m"

   ;; These variables control whether separate commands are bound in the GUI to
   ;; the key pairs `C-i', `TAB' and `C-m', `RET'.
   ;; Setting it to a non-nil value, allows for separate commands under `C-i'
   ;; and TAB or `C-m' and `RET'.
   ;; In the terminal, these pairs are generally indistinguishable, so this only
   ;; works in the GUI. (default nil)
   dotspacemacs-distinguish-gui-tab nil

   ;; If non-nil `Y' is remapped to `y$' in Evil states. (default nil)
   dotspacemacs-remap-Y-to-y$ nil

   ;; If non-nil, the shift mappings `<' and `>' retain visual state if used
   ;; there. (default t)
   dotspacemacs-retain-visual-state-on-shift t

   ;; If non-nil, `J' and `K' move lines up and down when in visual mode.
   ;; (default nil)
   dotspacemacs-visual-line-move-text nil

   ;; If non-nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
   ;; (default nil)
   dotspacemacs-ex-substitute-global nil

   ;; Name of the default layout (default "Default")
   dotspacemacs-default-layout-name "Default"

   ;; If non-nil the default layout name is displayed in the mode-line.
   ;; (default nil)
   dotspacemacs-display-default-layout nil

   ;; If non-nil then the last auto saved layouts are resumed automatically upon
   ;; start. (default nil)
   dotspacemacs-auto-resume-layouts nil

   ;; If non-nil, auto-generate layout name when creating new layouts. Only has
   ;; effect when using the "jump to layout by number" commands. (default nil)
   dotspacemacs-auto-generate-layout-names nil

   ;; Size (in MB) above which spacemacs will prompt to open the large file
   ;; literally to avoid performance issues. Opening a file literally means that
   ;; no major mode or minor modes are active. (default is 1)
   dotspacemacs-large-file-size 1

   ;; Location where to auto-save files. Possible values are `original' to
   ;; auto-save the file in-place, `cache' to auto-save the file to another
   ;; file stored in the cache directory and `nil' to disable auto-saving.
   ;; (default 'cache)
   dotspacemacs-auto-save-file-location 'cache

   ;; Maximum number of rollback slots to keep in the cache. (default 5)
   dotspacemacs-max-rollback-slots 5

   ;; If non-nil, `helm' will try to minimize the space it uses. (default nil)
   dotspacemacs-helm-resize nil

   ;; if non-nil, the helm header is hidden when there is only one source.
   ;; (default nil)
   dotspacemacs-helm-no-header nil

   ;; define the position to display `helm', options are `bottom', `top',
   ;; `left', or `right'. (default 'bottom)
   dotspacemacs-helm-position 'bottom

   ;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching
   ;; in all non-asynchronous sources. If set to `source', preserve individual
   ;; source settings. Else, disable fuzzy matching in all sources.
   ;; (default 'always)
   dotspacemacs-helm-use-fuzzy 'always

   ;; If non-nil, the paste transient-state is enabled. While enabled, pressing
   ;; `p' several times cycles through the elements in the `kill-ring'.
   ;; (default nil)
   dotspacemacs-enable-paste-transient-state nil

   ;; Which-key delay in seconds. The which-key buffer is the popup listing
   ;; the commands bound to the current keystroke sequence. (default 0.4)
   dotspacemacs-which-key-delay 0.4

   ;; Which-key frame position. Possible values are `right', `bottom' and
   ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
   ;; right; if there is insufficient space it displays it at the bottom.
   ;; (default 'bottom)
   dotspacemacs-which-key-position 'bottom

   ;; Control where `switch-to-buffer' displays the buffer. If nil,
   ;; `switch-to-buffer' displays the buffer in the current window even if
   ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
   ;; displays the buffer in a same-purpose window even if the buffer can be
   ;; displayed in the current window. (default nil)
   dotspacemacs-switch-to-buffer-prefers-purpose nil

   ;; If non-nil a progress bar is displayed when spacemacs is loading. This
   ;; may increase the boot time on some systems and emacs builds, set it to
   ;; nil to boost the loading time. (default t)
   dotspacemacs-loading-progress-bar t

   ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
   ;; (Emacs 24.4+ only)
   dotspacemacs-fullscreen-at-startup t

   ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
   ;; Use to disable fullscreen animations in OSX. (default nil)
   dotspacemacs-fullscreen-use-non-native nil

   ;; If non-nil the frame is maximized when Emacs starts up.
   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
   ;; (default nil) (Emacs 24.4+ only)
   dotspacemacs-maximized-at-startup t

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's active or selected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-active-transparency 90

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's inactive or deselected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-inactive-transparency 90

   ;; If non-nil show the titles of transient states. (default t)
   dotspacemacs-show-transient-state-title t

   ;; If non-nil show the color guide hint for transient state keys. (default t)
   dotspacemacs-show-transient-state-color-guide t

   ;; If non-nil unicode symbols are displayed in the mode line. (default t)
   dotspacemacs-mode-line-unicode-symbols t

   ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
   ;; scrolling overrides the default behavior of Emacs which recenters point
   ;; when it reaches the top or bottom of the screen. (default t)
   dotspacemacs-smooth-scrolling t

   ;; Control line numbers activation.
   ;; If set to `t' or `relative' line numbers are turned on in all `prog-mode' and
   ;; `text-mode' derivatives. If set to `relative', line numbers are relative.
   ;; This variable can also be set to a property list for finer control:
   ;; '(:relative nil
   ;;   :disabled-for-modes dired-mode
   ;;                       doc-view-mode
   ;;                       markdown-mode
   ;;                       org-mode
   ;;                       pdf-view-mode
   ;;                       text-mode
   ;;   :size-limit-kb 1000)
   ;; (default nil)
   dotspacemacs-line-numbers t

   ;; Code folding method. Possible values are `evil' and `origami'.
   ;; (default 'evil)
   dotspacemacs-folding-method 'evil

   ;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
   ;; (default nil)
   dotspacemacs-smartparens-strict-mode nil

   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
   ;; over any automatically added closing parenthesis, bracket, quote, etc…
   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
   dotspacemacs-smart-closing-parenthesis nil

   ;; Select a scope to highlight delimiters. Possible values are `any',
   ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
   ;; emphasis the current one). (default 'all)
   dotspacemacs-highlight-delimiters 'all

   ;; If non-nil, start an Emacs server if one is not already running.
   dotspacemacs-enable-server t

   ;; If non-nil, advise quit functions to keep server open when quitting.
   ;; (default nil)
   dotspacemacs-persistent-server nil

   ;; List of search tool executable names. Spacemacs uses the first installed
   ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
   ;; (default '("rg" "ag" "pt" "ack" "grep"))
   dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")

   ;; Format specification for setting the frame title.
   ;; %a - the `abbreviated-file-name', or `buffer-name'
   ;; %t - `projectile-project-name'
   ;; %I - `invocation-name'
   ;; %S - `system-name'
   ;; %U - contents of $USER
   ;; %b - buffer name
   ;; %f - visited file name
   ;; %F - frame name
   ;; %s - process status
   ;; %p - percent of buffer above top of window, or Top, Bot or All
   ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
   ;; %m - mode name
   ;; %n - Narrow if appropriate
   ;; %z - mnemonics of buffer, terminal, and keyboard coding systems
   ;; %Z - like %z, but including the end-of-line format
   ;; (default "%I@%S")
   dotspacemacs-frame-title-format "%I@%S"

   ;; Format specification for setting the icon title format
   ;; (default nil - same as frame-title-format)
   dotspacemacs-icon-title-format nil

   ;; Delete whitespace while saving buffer. Possible values are `all'
   ;; to aggressively delete empty line and long sequences of whitespace,
   ;; `trailing' to delete only the whitespace at end of lines, `changed' to
   ;; delete only whitespace for changed lines or `nil' to disable cleanup.
   ;; (default nil)
   dotspacemacs-whitespace-cleanup 'trailing

   ;; Either nil or a number of seconds. If non-nil zone out after the specified
   ;; number of seconds. (default nil)
   dotspacemacs-zone-out-when-idle nil

   ;; Run `spacemacs/prettify-org-buffer' when
   ;; visiting README.org files of Spacemacs.
   ;; (default nil)
   dotspacemacs-pretty-docs nil))

(defun dotspacemacs/user-init ()
  "Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
configuration.
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."
  (defun org-mode-my-init ()
    (define-key org-mode-map (kbd "×") (kbd "*"))
    (autoload 'iimage-mode "iimage" "Support Inline image minor mode." t)
    (autoload 'turn-on-iimage-mode "iimage" "Turn on Inline image minor mode." t)
    ;; (define-key org-mode-map (kbd "－") (kbd "-"))
    )
  (add-hook 'org-mode-hook 'org-mode-my-init)
  )

(defun dotspacemacs/user-config ()
  "Configuration for user code:
This function is called at the very end of Spacemacs startup, after layer
configuration.
Put your configuration code here, except for variables that should be set
before packages are loaded."
  ;; (set-default-font "DejaVu Sans Mono 12")
  (set-fontset-font "fontset-default" 'unicode"WenQuanYi Zen Hei Mono 14") ;;for linux
  (setq auto-save-mode nil) ;;关闭自动保存模式
  (setq auto-save-default nil) ;;不生成 #filename# 临时文件

  (ispell-change-dictionary "american" t)
  (add-to-list 'load-path "~/rcfiles/lisp")

  (setq org-agenda-files (list "~/org/work.org"
                               "~/org/study.org"
                               "~/org/home.org"))
  (require 'sdcv-mode) ;;<c-c> d查词典

  ;; (use-package buffer-line
  ;;   :load-path "~/rcfiles/lisp/buffer-line"
  ;;   :init
  ;;   (setq buffer-line-place 'echo-area)    ; Acceptable value: `nil' or `echo-area', `mode-line'
  ;;   (setq buffer-line-mode-line-limit 60)  ; In case of `mode-line'.
  ;;   ;;(bind-key ",,b" #'buffer-line/next-buffer evil-motion-state-map)
  ;;   :config
  ;;   (buffer-line-mode 1))

  ;;org-mode export to latex
  (require 'ox-latex)
  (setq org-export-latex-listings t)

  ;;org-mode source code setup in exporting to latex
  (add-to-list 'org-latex-listings '("" "listings"))
  (add-to-list 'org-latex-listings '("" "color"))

  (add-to-list 'org-latex-packages-alist '("" "xcolor" t))
  (add-to-list 'org-latex-packages-alist '("" "listings" t))
  (add-to-list 'org-latex-packages-alist '("" "fontspec" t))
  (add-to-list 'org-latex-packages-alist '("" "indentfirst" t))
  (add-to-list 'org-latex-packages-alist '("" "xunicode" t))
  (add-to-list 'org-latex-packages-alist '("" "geometry"))
  (add-to-list 'org-latex-packages-alist '("" "float"))
  (add-to-list 'org-latex-packages-alist '("" "longtable"))
  (add-to-list 'org-latex-packages-alist '("" "tikz"))
  (add-to-list 'org-latex-packages-alist '("" "fancyhdr"))
  (add-to-list 'org-latex-packages-alist '("" "textcomp"))
  (add-to-list 'org-latex-packages-alist '("" "amsmath"))
  (add-to-list 'org-latex-packages-alist '("" "tabularx" t))
  (add-to-list 'org-latex-packages-alist '("" "booktabs" t))
  (add-to-list 'org-latex-packages-alist '("" "grffile" t))
  (add-to-list 'org-latex-packages-alist '("" "wrapfig" t))
  (add-to-list 'org-latex-packages-alist '("normalem" "ulem" t))
  (add-to-list 'org-latex-packages-alist '("" "amssymb" t))
  (add-to-list 'org-latex-packages-alist '("" "capt-of" t))
  (add-to-list 'org-latex-packages-alist '("figuresright" "rotating" t))
  (add-to-list 'org-latex-packages-alist '("Lenny" "fncychap" t))
  ;; Use XeLaTeX to export PDF in Org-mode
  (setq org-latex-pdf-process
        '("xelatex -interaction nonstopmode -output-directory %o %f"
          ;;"biber %b" "xelatex -interaction nonstopmode -output-directory %o %f"
          "bibtex %b"
          "xelatex -interaction nonstopmode -output-directory %o %f"
          "xelatex -interaction nonstopmode -output-directory %o %f"))

  (add-to-list 'org-latex-classes
               '("article"
                 "\\documentclass{article}
\\usepackage[slantfont, boldfont]{xeCJK}
\\usepackage{titlesec}
\\usepackage{hyperref}

[NO-DEFAULT-PACKAGES]
[PACKAGES]

\\parindent 2em

%如果没有它，会有一些 tex 特殊字符无法正常使用，比如连字符。
\\defaultfontfeatures{Mapping=tex-text}

% 中文断行
\\XeTeXlinebreaklocale \"zh\"
\\XeTeXlinebreakskip = 0pt plus 1pt minus 0.1pt

[EXTRA]
"
            ("\\section{%s}" . "\\section*{%s}")
            ("\\subsection{%s}" . "\\subsection*{%s}")
            ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
            ("\\paragraph{%s}" . "\\paragraph*{%s}")
            ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
  (add-to-list 'org-latex-classes
               '("beamer"
                 "\\documentclass{beamer}
\\usepackage[slantfont, boldfont]{xeCJK}
\\usepackage[none]{hyphenat}
\\usepackage[abs]{overpic}

[NO-DEFAULT-PACKAGES]
[PACKAGES]

\\parindent 2em

%如果没有它，会有一些 tex 特殊字符无法正常使用，比如连字符。
\\defaultfontfeatures{Mapping=tex-text}

% 中文断行
\\XeTeXlinebreaklocale \"zh\"
\\XeTeXlinebreakskip = 0pt plus 1pt minus 0.1pt

[EXTRA]
"
            ("\\section{%s}" . "\\section*{%s}")
            ("\\subsection{%s}" . "\\subsection*{%s}")
            ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
            ("\\paragraph{%s}" . "\\paragraph*{%s}")
            ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
  )

;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.
(defun dotspacemacs/emacs-custom-settings ()
  "Emacs custom settings.
This is an auto-generated function, do not modify its content directly, use
Emacs customize menu instead.
This function is called at the very end of Spacemacs initialization."
(custom-set-variables
 ;; custom-set-variables was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 '(package-selected-packages
   (quote
    (pip-requirements persp-mode org-mime hy-mode helm-make evil-mc evil-iedit-state company-anaconda anaconda-mode ace-window counsel swiper ivy smartparens highlight flycheck helm helm-core avy markdown-mode projectile pythonic yasnippet which-key org-plus-contrib yasnippet-snippets yapfify ws-butler winum volatile-highlights vi-tilde-fringe uuidgen use-package unfill toc-org symon string-inflection spaceline-all-the-icons restart-emacs request rainbow-delimiters pyvenv pytest pyenv-mode py-isort popwin pippel pipenv pcre2el password-generator paradox overseer org-projectile org-present org-pomodoro org-download org-bullets org-brain open-junk-file neotree nameless mwim move-text mmm-mode markdown-toc macrostep lorem-ipsum live-py-mode linum-relative link-hint indent-guide importmagic iedit hungry-delete htmlize hl-todo highlight-parentheses highlight-numbers highlight-indentation helm-xref helm-themes helm-swoop helm-pydoc helm-purpose helm-projectile helm-mode-manager helm-flx helm-descbinds helm-company helm-c-yasnippet helm-ag google-translate golden-ratio gnuplot gh-md fuzzy font-lock+ flyspell-correct-helm flycheck-pos-tip flx-ido fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-org evil-numbers evil-nerd-commenter evil-matchit evil-lisp-state evil-lion evil-indent-plus evil-exchange evil-escape evil-ediff evil-cleverparens evil-args evil-anzu eval-sexp-fu elisp-slime-nav editorconfig dumb-jump diminish define-word dash-functional cython-mode counsel-projectile company-statistics column-enforce-mode clean-aindent-mode centered-cursor-mode auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile aggressive-indent adaptive-wrap ace-link ace-jump-helm-line ac-ispell))))
(custom-set-faces
 ;; custom-set-faces was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 )
)
(global-visual-line-mode 1)
(global-set-key (kbd "C-SPC") 'nil)
(global-set-key (kbd "M-SPC") 'set-mark-command)