Skip to content

ssb22/polipo2

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Polipo2 is a single-threaded, non blocking caching web proxy that has very modest resource needs. See the file INSTALL for installation instructions. See the texinfo manual (available as HTML after installation) for more information.

The original Polipo was developed by Juliusz Chroboczek from 2003 and was maintained by him up until November 2016.

This Polipo2 fork is maintained by Silas S. Brown. It is not intended for general use—as Juliusz said when he stepped down, caching proxies are becoming obsolete for general use due to the increasing prevalence of encrypted alternatives to HTTP that reduce caching proxies to simple relays. If all you want is a simple relay (for example so your Web traffic originates from a remote IP address), then you can do better by using a VPN or a SOCKS5 proxy.

Polipo2 is now intended as a drop-in caching layer for experimental HTTP proxies such as Web Adjuster (see Adjuster’s --upstream-proxy option; I suggest increasing polipo2’s serverSlots and serverMaxSlots when used with parentProxy=localhost:8124).

Installation

On a suitably well-provisioned GNU/Linux system you can do make and optionally sudo make install (you can run polipo2 directly from your user account instead, e.g. ./polipo2 logFile=/tmp/polipo2.log pidFile=/tmp/polipo2.pid diskCacheRoot=""; if you are using it with Web Adjuster’s --upstream-proxy=:8123 you should also add parentProxy=localhost:8124 to the Polipo2 options, and consider serverSlots=256 and serverMaxSlots=256).

Performance

Polipo2 (like the original Polipo) uses the POSIX poll() system call (like 4.2BSD’s select() without the 1024-socket limit) to monitor its in-progress connections from a single thread. ​It does not use the more advanced epoll/kqueue mechanism that modern versions of large-scale proxies like Squid can use (and that Tornado and hence Web Adjuster can use) on the GNU/Linux and BSD platforms.

The problem with poll() is, it can monitor a huge number of connections at once to tell your code when one or more of them needs processing, but it doesn’t tell you which ones need this processing. ​So when poll() returns, Polipo2 has to spend CPU time looping through all of its open connections to see what needs doing. ​By contrast, Linux’s epoll and BSD’s kqueue can point your code directly at the connections that need attention, eliminating that loop.

This is not an issue if you have only a few dozen connections going at once, but once you’re in the tens of thousands, you will notice a CPU holdup from those tens of thousands of extra checks that have to be done every time anything happens on any connection!

If that’s your situation, I’d recommend switching to Squid, which is more scalable. ​I currently have no plans to upgrade Polipo2’s poll() into an epoll/kqueue, as Polipo2 is intended for small-scale experimental use (so if you’re getting big, “bite the bullet” and install Squid).

  • If using Squid with Web Adjuster’s --upstream-proxy=:3128, my suggested starting point is --run="squid -N -f squid.conf -u 0" with a squid.conf like:

    http_port 127.0.0.1:3128 http_access allow localhost cache_peer 127.0.0.1 parent 3129 0 no-query no-digest never_direct allow all dead_peer_timeout 99 seconds access_log none localhost cache_mem 256 MB

(see Squid’s cache_dir directive if you also want a disk cache)

Polipo2 RAM and disk usage

As with Polipo, Polipo2 does not have options to limit the maximum size of its disk cache. ​You could periodically purge from a separate process and then send SIGUSR2 (discard objects) to the running Polipo2, but if the machine is expected to stay up, it’s likely easier to run in RAM+swap (by setting diskCacheRoot="") and then the size can be constrained more accurately (defaults to 25% of RAM; see note on differences with Polipo below).

On the other hand, a non-expiring disk cache is a useful option if you wish to collect a corpus of material from a site as users browse it (without needing to run a ‘crawler’ which might annoy the site); Polipo2’s file format is quite easy for other programs to read. ​Obviously you’d have to respect the copyright on the resulting material.

Differences from the original Polipo

So far:

  1. If running in RAM only (diskCacheRoot=""), Polipo2’s chunkHighMark now defaults to 25% of the physical RAM even on machines above 96M (its default is not limited to 24M as it is when diskCacheRoot is set). objectHighMark defaults to 2048 objects for every 24M in chunkHighMark. You can still override these of course (remember chunkHighMark is in bytes).
  2. Polipo2 contains a little more “defensive code” to catch segmentation faults before they happen.
  3. Polipo2 does not upset your system administrator by having a home page that says “no longer maintained” in large letters at the top. ​If I come across additional problems, I intend to either fix them or (in the case of a security problem I can’t easily fix) remove or disable the offending functionality so Polipo2 stays ‘sysadmin-friendly’.

Packages

No packages published

Languages

  • C 98.5%
  • Other 1.5%