hanobo

Home Assistant implementation of pynobo as a climate component

As for now you can see and change Operation and Preset for Zones and set eco/comfort temperatures if you have a supported thermostat.

The possible Operation modes are as following:

• Auto - In this mode the Zone is in the Normal setting and Preset shows which state the Zone is in right now (according to calendar setup)
• Heat - In this mode the Zone in in the Override setting and in the state selected by Preset (Away, Eco, Comfort)

This can be utilized the following ways:

• Changing Preset to [Away, Eco, Comfort] will automatically change Operation to Heat
• Changing Preset to None will automatically change Operation to Auto and update Preset
• Changing Operation to Auto will automatically update Preset
• Changing Operation to Heat will set Preset to Comfort

To get started with this superexperimental implementation:

• Clone or download the project to [HA config path]/custom_components/nobo_hub:

• Add the following to your Home Assistant configuration file:

  # Nobø Energy Control
  climate: 
    - platform: nobo_hub
      host: [your nobø serial] # You can use the 3 last digits if using discovery
  #    ip_address: [your nobø ip] # Uncomment if you do not want discovery
  

• Restart Home Assistant, you will get this warning:

  WARNING (MainThread) [homeassistant.loader] You are using a custom component for nobo_hub.climate which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you do experience issues with Home Assistant.
  

• Play around and figure out what does not work..

• If you want some more logging info, add this to your Home Assistant configuration file:

  # Extra logging
  logger:
    default: warning
    logs:
      custom_components.nobo_hub.climate: debug