doc/man: Fix double dash issue (fixes #746)

doc/man/st-flash.1

@@ -1,4 +1,4 @@
-.\" Automatically generated by Pandoc 2.1.1
+.\" Automatically generated by Pandoc 2.4
 .\"
 .TH "st\-flash" "1" "Feb 2018" "Open Source STMicroelectronics Stlink Tools" "stlink"
 .hy
@@ -7,92 +7,74 @@
 st\-flash \- Flash binary files to STM32 device
 .SH SYNOPSIS
 .PP
-\f[I]st\-flash\f[] [\f[I]OPTIONS\f[]] {read|write|erase} [\f[I]FILE\f[]]
-<ADDR> <SIZE>
+\f[I]st\-flash\f[R] [\f[I]OPTIONS\f[R]] {read|write|erase}
+[\f[I]FILE\f[R]] <ADDR> <SIZE>
 .SH DESCRIPTION
 .PP
 Flash binary files to arbitrary sections of memory, or read arbitrary
 addresses of memory out to a binary file.
 .PP
 You can use this instead of st\-util(1) if you prefer, but remember to
-use the \f[B].bin\f[] image, rather than the \f[B].elf\f[] file.
+use the \f[B].bin\f[R] image, rather than the \f[B].elf\f[R] file.
 .PP
-Use hexadecimal format for the \f[I]ADDR\f[] and \f[I]SIZE\f[].
+Use hexadecimal format for the \f[I]ADDR\f[R] and \f[I]SIZE\f[R].
 .SH COMMANDS
 .TP
-.B write \f[I]FILE\f[] \f[I]ADDR\f[]
-Write firmware \f[I]FILE\f[] to device starting from \f[I]ADDR\f[]
-.RS
-.RE
+.B write \f[I]FILE\f[R] \f[I]ADDR\f[R]
+Write firmware \f[I]FILE\f[R] to device starting from \f[I]ADDR\f[R]
 .TP
-.B read \f[I]FILE\f[] \f[I]ADDR\f[] \f[I]SIZE\f[]
-Read firmware from device starting from \f[I]ADDR\f[] up to
-\f[I]SIZE\f[] bytes to \f[I]FILE\f[]
-.RS
-.RE
+.B read \f[I]FILE\f[R] \f[I]ADDR\f[R] \f[I]SIZE\f[R]
+Read firmware from device starting from \f[I]ADDR\f[R] up to
+\f[I]SIZE\f[R] bytes to \f[I]FILE\f[R]
 .TP
 .B erase
 Perform a mass erasing of the device firmware
-.RS
-.RE
 .TP
 .B reset
 Reset the target
-.RS
-.RE
 .SH OPTIONS
 .TP
-.B \f[C]\-\-version\f[]
+.B \-\-version
 Print version information
-.RS
-.RE
 .TP
-.B \f[C]\-\-debug\f[]
+.B \-\-debug
 TODO
-.RS
-.RE
 .TP
-.B \f[C]\-\-reset\f[]
+.B \-\-reset
 TODO
-.RS
-.RE
 .TP
-.B \f[C]\-\-serial\f[] \f[I]iSerial\f[]
+.B \-\-serial \f[I]iSerial\f[R]
 TODO
-.RS
-.RE
 .TP
-.B \f[C]\-\-flash=fsize\f[]
+.B \-\-flash=fsize
 Where fsize is the size in decimal, octal, or hex followed by an
 optional multiplier `k' for KB, or `m' for MB.
 Use a leading \[lq]0x\[rq] to specify hexadecimal, or a leading zero for
 octal.
-.RS
-.RE
 .SH EXAMPLES
 .PP
-Flash \f[C]firmware.bin\f[] to device
+Flash \f[C]firmware.bin\f[R] to device
 .IP
 .nf
 \f[C]
-$\ st\-flash\ write\ firmware.bin\ 0x8000000
-\f[]
+$ st\-flash write firmware.bin 0x8000000
+\f[R]
 .fi
 .PP
 Read firmware from device (4096 bytes)
 .IP
 .nf
 \f[C]
-$\ st\-flash\ read\ firmware.bin\ 0x8000000\ 4096
-\f[]
+$ st\-flash read firmware.bin 0x8000000 4096
+\f[R]
 .fi
 .PP
 Erase firmware from device
 .IP
 .nf
 \f[C]
-$\ st\-flash\ erase
-\f[]
+$ st\-flash erase
+\f[R]
 .fi
 .SH SEE ALSO
 .PP
@@ -101,4 +83,4 @@ st\-util(1), st\-info(1)
 .PP
 This work is copyrighted.
 Stlink contributors.
-See \f[I]LICENSE\f[] file in the stlink source distribution.
+See \f[I]LICENSE\f[R] file in the stlink source distribution.

doc/man/st-flash.md

@@ -36,19 +36,19 @@ reset
 
 # OPTIONS
 
-`--version`
+\--version
 :   Print version information
 
-`--debug`
+\--debug
 :   TODO
 
-`--reset`
+\--reset
 :   TODO
 
-`--serial` *iSerial*
+\--serial *iSerial*
 :   TODO
 
-`--flash=fsize`
+\--flash=fsize
 :   Where fsize is the size in decimal, octal, or hex followed by an optional multiplier 
 'k' for KB, or 'm' for MB.
 Use a leading "0x" to specify hexadecimal, or a leading zero for octal.

doc/man/st-info.1

@@ -1,4 +1,4 @@
-.\" Automatically generated by Pandoc 2.1.1
+.\" Automatically generated by Pandoc 2.4
 .\"
 .TH "st\-flash" "1" "Feb 2018" "Open Source STMicroelectronics Stlink Tools" "stlink"
 .hy
@@ -8,7 +8,7 @@ st\-info \- Provides information about connected STLink and STM32
 devices
 .SH SYNOPSIS
 .PP
-\f[I]st\-info\f[] [\f[I]OPTIONS\f[]]
+\f[I]st\-info\f[R] [\f[I]OPTIONS\f[R]]
 .SH DESCRIPTION
 .PP
 Provides information about connected STLink programmers and STM32
@@ -18,57 +18,39 @@ description.
 .TP
 .B \[en]version
 Print version information
-.RS
-.RE
 .TP
-.B \[en]flash
+.B \-\-flash
 Display amount of flash memory available in the device
-.RS
-.RE
 .TP
-.B \[en]sram
+.B \-\-sram
 Display amount of sram memory available in device
-.RS
-.RE
 .TP
-.B \[en]descr
+.B \-\-descr
 Display textual description of the device
-.RS
-.RE
 .TP
-.B \[en]pagesize
+.B \-\-pagesize
 Display the page size of the device
-.RS
-.RE
 .TP
-.B \[en]chipid
+.B \-\-chipid
 Display the chip ID of the device
-.RS
-.RE
 .TP
-.B \[en]serial
+.B \-\-serial
 Display the serial code of the device
-.RS
-.RE
 .TP
-.B \[en]hla\-serial
+.B \-\-hla\-serial
 Display the hex escaped serial code of the device
-.RS
-.RE
 .TP
-.B \[en]probe
+.B \-\-probe
 Display the summarized information of the connected programmers and
 devices
-.RS
-.RE
 .SH EXAMPLES
 .PP
 Display information about connected programmers and devices
 .IP
 .nf
 \f[C]
-$\ st\-info\ \-\-probe
-\f[]
+$ st\-info \-\-probe
+\f[R]
 .fi
 .SH SEE ALSO
 .PP
@@ -77,4 +59,4 @@ st\-util(1), st\-flash(1)
 .PP
 This work is copyrighted.
 Stlink contributors.
-See \f[I]LICENSE\f[] file in the stlink source distribution.
+See \f[I]LICENSE\f[R] file in the stlink source distribution.

doc/man/st-info.md

@@ -17,31 +17,31 @@ Serial code, openocd, flash, sram, page size, chipid, description.
 
 # OPTIONS
 
---version
+\--version
 :   Print version information
 
---flash
+\--flash
 :   Display amount of flash memory available in the device
 
---sram
+\--sram
 :   Display amount of sram memory available in device
 
---descr
+\--descr
 :   Display textual description of the device
 
---pagesize
+\--pagesize
 :   Display the page size of the device
 
---chipid
+\--chipid
 :   Display the chip ID of the device
 
---serial
+\--serial
 :   Display the serial code of the device
 
---hla-serial
+\--hla-serial
 :   Display the hex escaped serial code of the device
 
---probe
+\--probe
 :   Display the summarized information of the connected programmers and devices
 
 

doc/man/st-util.1

@@ -1,4 +1,4 @@
-.\" Automatically generated by Pandoc 2.1.1
+.\" Automatically generated by Pandoc 2.4
 .\"
 .TH "st\-util" "1" "Feb 2018" "Open Source STMicroelectronics Stlink Tools" "stlink"
 .hy
@@ -7,83 +7,63 @@
 st\-util \- Run GDB server to interact with STM32 device
 .SH SYNOPSIS
 .PP
-\f[I]st\-util\f[] [<ARGS>\&...]
+\f[I]st\-util\f[R] [<ARGS>\&...]
 .SH DESCRIPTION
 .PP
 Start a GDB server to interact with a STM32 device Run the main binary
 of the local package (src/main.rs).
 .PP
-If a port number is not specified using the \f[B]\[en]listen_port\f[]
-option, the default \f[B]4242\f[] port will be used.
+If a port number is not specified using the \f[B]\[en]listen_port\f[R]
+option, the default \f[B]4242\f[R] port will be used.
 .PP
 Stlink version 2 is used by default unless the option
-\f[B]\[en]stlinkv1\f[] is given.
+\f[B]\[en]stlinkv1\f[R] is given.
 .PP
 The STLinkV2 device to use can be specified in the environment variable
 STLINK_DEVICE on the format :.
 .SH OPTIONS
 .TP
-.B \-h, \f[C]\-\-help\f[]
+.B \-h, \-\-help
 Print this message.
-.RS
-.RE
 .TP
-.B \f[C]\-\-version\f[]
+.B \-\-version
 Print version information
-.RS
-.RE
 .TP
-.B \-v \f[I]XX\f[], \f[C]\-\-verbose=XX\f[]
+.B \-v \f[I]XX\f[R], \-\-verbose=XX
 Specify a specific verbosity level (0..99)
-.RS
-.RE
 .TP
-.B \-v, \f[C]\-\-verbose\f[]
+.B \-v, \-\-verbose
 Specify generally verbose logging
-.RS
-.RE
 .TP
-.B \-s \f[I]X\f[], \f[C]\-\-stlink_version=X\f[]
+.B \-s \f[I]X\f[R], \-\-stlink_version=X
 Choose what version of stlink to use, (defaults to 2)
-.RS
-.RE
 .TP
-.B \-1, \f[C]\-\-stlinkv1\f[]
+.B \-1, \-\-stlinkv1
 Force stlink version 1
-.RS
-.RE
 .TP
-.B \-p \f[I]4242\f[], \f[C]\-\-listen_port=1234\f[]
+.B \-p \f[I]4242\f[R], \-\-listen_port=1234
 Set the gdb server listen port.
 (default port: 4242)
-.RS
-.RE
 .TP
-.B \-m, \f[C]\-\-multi\f[]
+.B \-m, \-\-multi
 Set gdb server to extended mode.
 st\-util will continue listening for connections after disconnect.
-.RS
-.RE
 .TP
-.B \-n, \f[C]\-\-no\-reset\f[]
+.B \-n, \-\-no\-reset
 Do not reset board on connection.
-.RS
-.RE
 .TP
-.B \f[C]\-\-semihosting\f[]
+.B \-\-semihosting
 Enable ARM Semihosting output on stdout
-.RS
-.RE
 .SH EXAMPLES
 .PP
 Run GDB server on port 4500 and connect to it
 .IP
 .nf
 \f[C]
-$\ st\-util\ \-p\ 4500
-$\ gdb
-(gdb)\ target\ extended\-remote\ localhost:4500
-\f[]
+$ st\-util \-p 4500
+$ gdb
+(gdb) target extended\-remote localhost:4500
+\f[R]
 .fi
 .SH SEE ALSO
 .PP
@@ -92,4 +72,4 @@ st\-flash(1), st\-info(1)
 .PP
 This work is copyrighted.
 Stlink contributors.
-See \f[I]LICENSE\f[] file in the stlink source distribution.
+See \f[I]LICENSE\f[R] file in the stlink source distribution.