Add more tests

stm32-rs · Jan 29, 2025 · 65e2272 · 65e2272
1 parent b16beb2
commit 65e2272
Showing 1 changed file with 106 additions and 30 deletions.
diff --git a/tests/pwm.rs b/tests/pwm.rs
@@ -1,7 +1,7 @@
 #![no_std]
 #![no_main]
 
-#[path ="../examples/utils/mod.rs"]
+#[path = "../examples/utils/mod.rs"]
 mod utils;
 
 use utils::logger::println;
@@ -15,70 +15,146 @@ use stm32g4xx_hal as hal;
 
 #[defmt_test::tests]
 mod tests {
-    use embedded_hal::pwm::SetDutyCycle;
+    use embedded_hal::{
+        digital::{InputPin, OutputPin},
+        pwm::SetDutyCycle,
+    };
     use fugit::RateExtU32;
     use stm32g4xx_hal::{
-        delay::SYSTDelayExt, gpio::{GpioExt, AF6}, pwm::PwmExt, rcc::RccExt, stm32::GPIOA,
+        delay::SYSTDelayExt,
+        gpio::{GpioExt, AF6},
+        pwm::PwmExt,
+        rcc::RccExt,
+        stm32::GPIOA,
     };
 
+    #[test]
+    fn gpio_push_pull() {
+        use super::*;
+
+        // TODO: Is it ok to steal these?
+        let cp = unsafe { stm32::CorePeripherals::steal() };
+        let dp = unsafe { stm32::Peripherals::steal() };
+        let mut rcc = dp.RCC.constrain();
+        let mut delay = cp.SYST.delay(&rcc.clocks);
+
+        let gpioa = dp.GPIOA.split(&mut rcc);
+        let mut pin = gpioa.pa8.into_push_pull_output();
+
+        pin.set_high().unwrap();
+        delay.delay(1.millis()); // Give the pin plenty of time to go high
+        assert!(pin.is_high().unwrap());
+        {
+            let gpioa = unsafe { &*GPIOA::PTR };
+            assert!(!is_pa8_low(gpioa));
+        }
+
+        pin.set_low().unwrap();
+        delay.delay(1.millis()); // Give the pin plenty of time to go low
+        assert!(pin.is_low().unwrap());
+        {
+            let gpioa = unsafe { &*GPIOA::PTR };
+            assert!(is_pa8_low(gpioa));
+        }
+    }
+
+    #[test]
+    fn gpio_open_drain() {
+        use super::*;
+
+        // TODO: Is it ok to steal these?
+        let cp = unsafe { stm32::CorePeripherals::steal() };
+        let dp = unsafe { stm32::Peripherals::steal() };
+        let mut rcc = dp.RCC.constrain();
+        let mut delay = cp.SYST.delay(&rcc.clocks);
+
+        let gpioa = dp.GPIOA.split(&mut rcc);
+        let mut pin = gpioa.pa8.into_open_drain_output();
+
+        // Enable pull-up resistor
+        {
+            let gpioa = unsafe { &*GPIOA::PTR };
+            gpioa.pupdr().modify(|_, w| w.pupdr8().pull_up());
+        }
+
+        pin.set_high().unwrap();
+        delay.delay(1.millis()); // Give the pin plenty of time to go high
+        assert!(pin.is_high().unwrap());
+        {
+            let gpioa = unsafe { &*GPIOA::PTR };
+            assert!(!is_pa8_low(gpioa));
+        }
+
+        pin.set_low().unwrap();
+        delay.delay(1.millis()); // Give the pin plenty of time to go low
+        assert!(pin.is_low().unwrap());
+        {
+            let gpioa = unsafe { &*GPIOA::PTR };
+            assert!(is_pa8_low(gpioa));
+        }
+    }
+
     #[test]
     fn foo() {
         use super::*;
 
-        let cp = stm32::CorePeripherals::take().expect("cannot take peripherals");
-        let dp = stm32::Peripherals::take().expect("cannot take peripherals");
+        // TODO: Is it ok to steal these?
+        let cp = unsafe { stm32::CorePeripherals::steal() };
+        let dp = unsafe { stm32::Peripherals::steal() };
         let mut rcc = dp.RCC.constrain();
         let mut delay = cp.SYST.delay(&rcc.clocks);
 
         let gpioa = dp.GPIOA.split(&mut rcc);
-        let pin: stm32g4xx_hal::gpio::gpioa::PA8<stm32g4xx_hal::gpio::Alternate<AF6>> = gpioa.pa8.into_alternate();
+        let pin: stm32g4xx_hal::gpio::gpioa::PA8<stm32g4xx_hal::gpio::Alternate<AF6>> =
+            gpioa.pa8.into_alternate();
 
-        //let mut pwm = dp.TIM1.pwm(pin, 1000u32.Hz(), &mut rcc);
+        let mut pwm = dp.TIM1.pwm(pin, 1000u32.Hz(), &mut rcc);
 
-        //pwm.set_duty_cycle_percent(50).unwrap();
-        //pwm.enable();
-
+        pwm.set_duty_cycle_percent(50).unwrap();
+        pwm.enable();
 
         let gpioa = unsafe { &*GPIOA::PTR };
 
-        let get_pin_state = || unsafe {  (0x4800_0004 as *const u32).read_volatile() };
+        //let get_pin_state = || unsafe {  (0x4800_0004 as *const u32).read_volatile() };
 
         // TODO: This is a very bad way to measure time
-        let min: MicrosDurationU32 = 490u32.micros();// Some extra on min for cpu overhead
+        let min: MicrosDurationU32 = 490u32.micros(); // Some extra on min for cpu overhead
         let max: MicrosDurationU32 = 505u32.micros();
 
         {
             println!("Awaiting first rising edge...");
-            //println!("{}", gpioa.odr().read().odr(8).is_high());
-            println!("{}", get_pin_state());
-            //let duration_until_lo = await_lo(&gpioa, &mut delay, max);//.unwrap();
-        }
-        /*
-            //println!("Low..., Waited ~{}us until low", duration_until_lo);
-            let lo_duration = await_hi(&gpioa, &mut delay, max);//.unwrap();
-            //println!("High..., Low half period: {}us", lo_duration);
+            let duration_until_lo = await_lo(&gpioa, &mut delay, max).unwrap();
+            println!("Low..., Waited ~{} until low", duration_until_lo);
+            let lo_duration = await_hi(&gpioa, &mut delay, max).unwrap();
+            println!("High..., Low half period: {}", lo_duration);
         }
 
         for _ in 0..10 {
             // Make sure the timer half periods are within 490-505us
 
-            let hi_duration = await_lo(&gpioa, &mut delay, max);//.unwrap();
-            println!("Low..., High half period: {}us", hi_duration);
-            //assert!(hi_duration > min, "{} > {}", hi_duration, min);
+            let hi_duration = await_lo(&gpioa, &mut delay, max).unwrap();
+            println!("Low..., High half period: {}", hi_duration);
+            assert!(hi_duration > min, "{} > {}", hi_duration, min);
 
-            let lo_duration = await_hi(&gpioa, &mut delay, max);//.unwrap();
-            println!("High..., Low half period: {}us", lo_duration);
-            //assert!(lo_duration > min, "{} > {}", lo_duration, min);
+            let lo_duration = await_hi(&gpioa, &mut delay, max).unwrap();
+            println!("High..., Low half period: {}", lo_duration);
+            assert!(lo_duration > min, "{} > {}", lo_duration, min);
         }
 
         println!("Done!");
         for i in (0..5).rev() {
             println!("{}", i);
             delay.delay(1000.millis());
-        }*/
+        }
+
+        pwm.disable();
     }
 }
 
+fn is_pa8_low(gpioa: &stm32::gpioa::RegisterBlock) -> bool {
+    gpioa.idr().read().idr(8).is_low()
+}
+
 #[derive(Debug, defmt::Format)]
 struct ErrorTimedOut;
 
@@ -87,15 +163,15 @@ fn await_lo(
     delay: &mut SystDelay,
     timeout: MicrosDurationU32,
 ) -> Result<MicrosDurationU32, ErrorTimedOut> {
-    await_p(|| gpioa.idr().read().idr(8).is_low(), delay, timeout)
+    await_p(|| is_pa8_low(gpioa), delay, timeout)
 }
 
 fn await_hi(
     gpioa: &stm32::gpioa::RegisterBlock,
     delay: &mut SystDelay,
     timeout: MicrosDurationU32,
 ) -> Result<MicrosDurationU32, ErrorTimedOut> {
-    await_p(|| gpioa.idr().read().idr(8).is_high(), delay, timeout)
+    await_p(|| !is_pa8_low(gpioa), delay, timeout)
 }
 
 fn await_p(
@@ -107,7 +183,7 @@ fn await_p(
         if p() {
             return Ok(i.micros());
         }
-        //delay.delay(1_u32.micros());
+        delay.delay(1_u32.micros());
     }
     Err(ErrorTimedOut)
 }