-
Notifications
You must be signed in to change notification settings - Fork 960
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Add all generated STM32F1xx generic variant files
Signed-off-by: Frederic Pillon <frederic.pillon@st.com>
- Loading branch information
Showing
288 changed files
with
31,888 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,215 @@ | ||
/* | ||
******************************************************************************* | ||
* Copyright (c) 2020-2021, STMicroelectronics | ||
* All rights reserved. | ||
* | ||
* This software component is licensed by ST under BSD 3-Clause license, | ||
* the "License"; You may not use this file except in compliance with the | ||
* License. You may obtain a copy of the License at: | ||
* opensource.org/licenses/BSD-3-Clause | ||
* | ||
******************************************************************************* | ||
*/ | ||
/* | ||
* Automatically generated from STM32F100C(4-6)Tx.xml | ||
* CubeMX DB release 6.0.21 | ||
*/ | ||
#if !defined(CUSTOM_PERIPHERAL_PINS) | ||
#include "Arduino.h" | ||
#include "PeripheralPins.h" | ||
|
||
/* ===== | ||
* Notes: | ||
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other | ||
* HW peripheral instances. You can use them the same way as any other "normal" | ||
* pin (i.e. analogWrite(PA7_ALT1, 128);). | ||
* | ||
* - Commented lines are alternative possibilities which are not used per default. | ||
* If you change them, you will have to know what you do | ||
* ===== | ||
*/ | ||
|
||
//*** ADC *** | ||
|
||
#ifdef HAL_ADC_MODULE_ENABLED | ||
WEAK const PinMap PinMap_ADC[] = { | ||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 | ||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 | ||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 | ||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 | ||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 | ||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 | ||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 | ||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 | ||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 | ||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
//*** DAC *** | ||
|
||
#ifdef HAL_DAC_MODULE_ENABLED | ||
WEAK const PinMap PinMap_DAC[] = { | ||
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 | ||
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
//*** I2C *** | ||
|
||
#ifdef HAL_I2C_MODULE_ENABLED | ||
WEAK const PinMap PinMap_I2C_SDA[] = { | ||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_DISABLE)}, | ||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
#ifdef HAL_I2C_MODULE_ENABLED | ||
WEAK const PinMap PinMap_I2C_SCL[] = { | ||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_DISABLE)}, | ||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
//*** TIM *** | ||
|
||
#ifdef HAL_TIM_MODULE_ENABLED | ||
WEAK const PinMap PinMap_TIM[] = { | ||
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM2_CH1 | ||
{PA_0_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 1, 0)}, // TIM2_CH1 | ||
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_DISABLE, 2, 0)}, // TIM2_CH2 | ||
{PA_1_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 2, 0)}, // TIM2_CH2 | ||
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_DISABLE, 3, 0)}, // TIM2_CH3 | ||
{PA_2_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3 | ||
{PA_2_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM15_DISABLE, 1, 0)}, // TIM15_CH1 | ||
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_DISABLE, 4, 0)}, // TIM2_CH4 | ||
{PA_3_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 4, 0)}, // TIM2_CH4 | ||
{PA_3_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM15_DISABLE, 2, 0)}, // TIM15_CH2 | ||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_DISABLE, 1, 0)}, // TIM3_CH1 | ||
{PA_6_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM16_ENABLE, 1, 0)}, // TIM16_CH1 | ||
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N | ||
{PA_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_DISABLE, 2, 0)}, // TIM3_CH2 | ||
{PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM17_ENABLE, 1, 0)}, // TIM17_CH1 | ||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_DISABLE, 1, 0)}, // TIM1_CH1 | ||
{PA_8_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 0)}, // TIM1_CH1 | ||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_DISABLE, 2, 0)}, // TIM1_CH2 | ||
{PA_9_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 0)}, // TIM1_CH2 | ||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_DISABLE, 3, 0)}, // TIM1_CH3 | ||
{PA_10_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 0)}, // TIM1_CH3 | ||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_DISABLE, 4, 0)}, // TIM1_CH4 | ||
{PA_11_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 4, 0)}, // TIM1_CH4 | ||
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1 | ||
{PA_15_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 1, 0)}, // TIM2_CH1 | ||
{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 1)}, // TIM1_CH2N | ||
{PB_0_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_DISABLE, 3, 0)}, // TIM3_CH3 | ||
{PB_0_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 3, 0)}, // TIM3_CH3 | ||
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 1)}, // TIM1_CH3N | ||
{PB_1_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_DISABLE, 4, 0)}, // TIM3_CH4 | ||
{PB_1_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 4, 0)}, // TIM3_CH4 | ||
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 2, 0)}, // TIM2_CH2 | ||
{PB_3_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 2, 0)}, // TIM2_CH2 | ||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 1, 0)}, // TIM3_CH1 | ||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 2, 0)}, // TIM3_CH2 | ||
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM16_CH1N | ||
{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM17_CH1N | ||
{PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM16_DISABLE, 1, 0)}, // TIM16_CH1 | ||
{PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM17_DISABLE, 1, 0)}, // TIM17_CH1 | ||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3 | ||
{PB_10_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 3, 0)}, // TIM2_CH3 | ||
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 4, 0)}, // TIM2_CH4 | ||
{PB_11_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4 | ||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_DISABLE, 1, 1)}, // TIM1_CH1N | ||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_DISABLE, 2, 1)}, // TIM1_CH2N | ||
{PB_14_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM15_ENABLE, 1, 0)}, // TIM15_CH1 | ||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_DISABLE, 3, 1)}, // TIM1_CH3N | ||
{PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM15_CH1N | ||
{PB_15_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM15_ENABLE, 2, 0)}, // TIM15_CH2 | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
//*** UART *** | ||
|
||
#ifdef HAL_UART_MODULE_ENABLED | ||
WEAK const PinMap PinMap_UART_TX[] = { | ||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART2_DISABLE)}, | ||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART1_DISABLE)}, | ||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
#ifdef HAL_UART_MODULE_ENABLED | ||
WEAK const PinMap PinMap_UART_RX[] = { | ||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART2_DISABLE)}, | ||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART1_DISABLE)}, | ||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
#ifdef HAL_UART_MODULE_ENABLED | ||
WEAK const PinMap PinMap_UART_RTS[] = { | ||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART2_DISABLE)}, | ||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
#ifdef HAL_UART_MODULE_ENABLED | ||
WEAK const PinMap PinMap_UART_CTS[] = { | ||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, | ||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
//*** SPI *** | ||
|
||
#ifdef HAL_SPI_MODULE_ENABLED | ||
WEAK const PinMap PinMap_SPI_MOSI[] = { | ||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_DISABLE)}, | ||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
#ifdef HAL_SPI_MODULE_ENABLED | ||
WEAK const PinMap PinMap_SPI_MISO[] = { | ||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_DISABLE)}, | ||
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
#ifdef HAL_SPI_MODULE_ENABLED | ||
WEAK const PinMap PinMap_SPI_SCLK[] = { | ||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_DISABLE)}, | ||
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
#ifdef HAL_SPI_MODULE_ENABLED | ||
WEAK const PinMap PinMap_SPI_SSEL[] = { | ||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_DISABLE)}, | ||
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)}, | ||
{NC, NP, 0} | ||
}; | ||
#endif | ||
|
||
//*** No CAN *** | ||
|
||
//*** No ETHERNET *** | ||
|
||
//*** No QUADSPI *** | ||
|
||
//*** No USB *** | ||
|
||
//*** No SD *** | ||
|
||
#endif /* !CUSTOM_PERIPHERAL_PINS */ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,53 @@ | ||
/* Alternate pin name */ | ||
PA_0_ALT1 = PA_0 | ALT1, | ||
PA_1_ALT1 = PA_1 | ALT1, | ||
PA_2_ALT1 = PA_2 | ALT1, | ||
PA_2_ALT2 = PA_2 | ALT2, | ||
PA_3_ALT1 = PA_3 | ALT1, | ||
PA_3_ALT2 = PA_3 | ALT2, | ||
PA_6_ALT1 = PA_6 | ALT1, | ||
PA_7_ALT1 = PA_7 | ALT1, | ||
PA_7_ALT2 = PA_7 | ALT2, | ||
PA_8_ALT1 = PA_8 | ALT1, | ||
PA_9_ALT1 = PA_9 | ALT1, | ||
PA_10_ALT1 = PA_10 | ALT1, | ||
PA_11_ALT1 = PA_11 | ALT1, | ||
PA_15_ALT1 = PA_15 | ALT1, | ||
PB_0_ALT1 = PB_0 | ALT1, | ||
PB_0_ALT2 = PB_0 | ALT2, | ||
PB_1_ALT1 = PB_1 | ALT1, | ||
PB_1_ALT2 = PB_1 | ALT2, | ||
PB_3_ALT1 = PB_3 | ALT1, | ||
PB_10_ALT1 = PB_10 | ALT1, | ||
PB_11_ALT1 = PB_11 | ALT1, | ||
PB_14_ALT1 = PB_14 | ALT1, | ||
PB_15_ALT1 = PB_15 | ALT1, | ||
PB_15_ALT2 = PB_15 | ALT2, | ||
|
||
/* SYS_WKUP */ | ||
#ifdef PWR_WAKEUP_PIN1 | ||
SYS_WKUP1 = PA_0, | ||
#endif | ||
#ifdef PWR_WAKEUP_PIN2 | ||
SYS_WKUP2 = NC, | ||
#endif | ||
#ifdef PWR_WAKEUP_PIN3 | ||
SYS_WKUP3 = NC, | ||
#endif | ||
#ifdef PWR_WAKEUP_PIN4 | ||
SYS_WKUP4 = NC, | ||
#endif | ||
#ifdef PWR_WAKEUP_PIN5 | ||
SYS_WKUP5 = NC, | ||
#endif | ||
#ifdef PWR_WAKEUP_PIN6 | ||
SYS_WKUP6 = NC, | ||
#endif | ||
#ifdef PWR_WAKEUP_PIN7 | ||
SYS_WKUP7 = NC, | ||
#endif | ||
#ifdef PWR_WAKEUP_PIN8 | ||
SYS_WKUP8 = NC, | ||
#endif | ||
|
||
/* No USB */ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,21 @@ | ||
# This file help to add generic board entry. | ||
# upload.maximum_size and product_line have to be verified | ||
# and changed if needed. | ||
# See: https://github.com/stm32duino/wiki/wiki/Add-a-new-variant-%28board%29 | ||
|
||
# Generic F100C4Tx | ||
GenF1.menu.pnum.GENERIC_F100C4TX=Generic F100C4Tx | ||
GenF1.menu.pnum.GENERIC_F100C4TX.upload.maximum_size=16384 | ||
GenF1.menu.pnum.GENERIC_F100C4TX.upload.maximum_data_size=4096 | ||
GenF1.menu.pnum.GENERIC_F100C4TX.build.board=GENERIC_F100C4TX | ||
GenF1.menu.pnum.GENERIC_F100C4TX.build.product_line=STM32F100xB | ||
GenF1.menu.pnum.GENERIC_F100C4TX.build.variant=STM32F1xx/F100C(4-6)T | ||
|
||
# Generic F100C6Tx | ||
GenF1.menu.pnum.GENERIC_F100C6TX=Generic F100C6Tx | ||
GenF1.menu.pnum.GENERIC_F100C6TX.upload.maximum_size=32768 | ||
GenF1.menu.pnum.GENERIC_F100C6TX.upload.maximum_data_size=4096 | ||
GenF1.menu.pnum.GENERIC_F100C6TX.build.board=GENERIC_F100C6TX | ||
GenF1.menu.pnum.GENERIC_F100C6TX.build.product_line=STM32F100xB | ||
GenF1.menu.pnum.GENERIC_F100C6TX.build.variant=STM32F1xx/F100C(4-6)T | ||
|
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,27 @@ | ||
/* | ||
******************************************************************************* | ||
* Copyright (c) 2020-2021, STMicroelectronics | ||
* All rights reserved. | ||
* | ||
* This software component is licensed by ST under BSD 3-Clause license, | ||
* the "License"; You may not use this file except in compliance with the | ||
* License. You may obtain a copy of the License at: | ||
* opensource.org/licenses/BSD-3-Clause | ||
* | ||
******************************************************************************* | ||
*/ | ||
#if defined(ARDUINO_GENERIC_F100C4TX) || defined(ARDUINO_GENERIC_F100C6TX) | ||
#include "pins_arduino.h" | ||
|
||
/** | ||
* @brief System Clock Configuration | ||
* @param None | ||
* @retval None | ||
*/ | ||
WEAK void SystemClock_Config(void) | ||
{ | ||
/* SystemClock_Config can be generated by STM32CubeMX */ | ||
#warning "SystemClock_Config() is empty. Default clock at reset is used." | ||
} | ||
|
||
#endif /* ARDUINO_GENERIC_* */ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,71 @@ | ||
/* | ||
******************************************************************************* | ||
* Copyright (c) 2020-2021, STMicroelectronics | ||
* All rights reserved. | ||
* | ||
* This software component is licensed by ST under BSD 3-Clause license, | ||
* the "License"; You may not use this file except in compliance with the | ||
* License. You may obtain a copy of the License at: | ||
* opensource.org/licenses/BSD-3-Clause | ||
* | ||
******************************************************************************* | ||
*/ | ||
#if defined(ARDUINO_GENERIC_F100C4TX) || defined(ARDUINO_GENERIC_F100C6TX) | ||
#include "pins_arduino.h" | ||
|
||
// Digital PinName array | ||
const PinName digitalPin[] = { | ||
PA_0, // D1/A0 | ||
PA_1, // D2/A1 | ||
PA_2, // D3/A2 | ||
PA_3, // D4/A3 | ||
PA_4, // D5/A4 | ||
PA_5, // D6/A5 | ||
PA_6, // D7/A6 | ||
PA_7, // D8/A7 | ||
PA_8, // D9 | ||
PA_9, // D10 | ||
PA_10, // D11 | ||
PA_11, // D12 | ||
PA_12, // D13 | ||
PA_13, // D14 | ||
PA_14, // D15 | ||
PA_15, // D16 | ||
PB_0, // D17/A8 | ||
PB_1, // D18/A9 | ||
PB_2, // D19 | ||
PB_3, // D20 | ||
PB_4, // D21 | ||
PB_5, // D22 | ||
PB_6, // D23 | ||
PB_7, // D24 | ||
PB_8, // D25 | ||
PB_9, // D26 | ||
PB_10, // D27 | ||
PB_11, // D28 | ||
PB_12, // D29 | ||
PB_13, // D30 | ||
PB_14, // D31 | ||
PB_15, // D32 | ||
PC_13, // D33 | ||
PC_14, // D34 | ||
PC_15, // D35 | ||
PD_0, // D36 | ||
PD_1 // D37 | ||
}; | ||
|
||
// Analog (Ax) pin number array | ||
const uint32_t analogInputPin[] = { | ||
0, // A0, PA0 | ||
1, // A1, PA1 | ||
2, // A2, PA2 | ||
3, // A3, PA3 | ||
4, // A4, PA4 | ||
5, // A5, PA5 | ||
6, // A6, PA6 | ||
7, // A7, PA7 | ||
16, // A8, PB0 | ||
17 // A9, PB1 | ||
}; | ||
|
||
#endif /* ARDUINO_GENERIC_* */ |
Oops, something went wrong.