[New variant] STM32F407ZGT6 Mini

README.md

@@ -187,6 +187,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
 | :green_heart:  | STM32F401RB<br>STM32F401RC<br>STM32F401RD<br>STM32F401RE | Generic Board | *1.8.0* |  |
 | :green_heart:  | STM32F405RG | Generic Board | *1.9.0* |  |
 | :green_heart:  | STM32F407VE<br>STM32F407VG | Generic Board | *1.9.0* |  |
+| :green_heart:  | STM32F407Zx | vcc-gnd.com Mini | *1.9.0* | [More info](http://www.vcc-gnd.com/rtd/html/STM32/quickref.html#stm32f4) |
 | :green_heart:  | STM32F410C8<br>STM32F410CB | Generic Board | *1.9.0* |  |
 | :green_heart:  | STM32F410R8<br>STM32F410RB | Generic Board | *1.9.0* |  |
 | :green_heart:  | STM32F411CC<br>STM32F411CE | Generic Board | *1.9.0* |  |

boards.txt

@@ -1537,6 +1537,22 @@ GenF4.menu.pnum.Generic_F407VE.build.board=GENERIC_F407VE
 GenF4.menu.pnum.Generic_F407VE.build.product_line=STM32F407xx
 GenF4.menu.pnum.Generic_F407VE.build.variant=Generic_F4x7Vx
 
+# Generic F407ZG
+GenF4.menu.pnum.Generic_F407ZG=Generic F407ZG
+GenF4.menu.pnum.Generic_F407ZG.upload.maximum_size=1048576
+GenF4.menu.pnum.Generic_F407ZG.upload.maximum_data_size=131072
+GenF4.menu.pnum.Generic_F407ZG.build.board=Generic_F407ZG
+GenF4.menu.pnum.Generic_F407ZG.build.product_line=STM32F407xx
+GenF4.menu.pnum.Generic_F407ZG.build.variant=Generic_F407Zx
+
+# VCCGND_F407ZGT6 board
+GenF4.menu.pnum.VCCGND_F407ZGT6Mini=VCCGND F407ZGT6 Mini
+GenF4.menu.pnum.VCCGND_F407ZGT6Mini.upload.maximum_size=1048576
+GenF4.menu.pnum.VCCGND_F407ZGT6Mini.upload.maximum_data_size=131072
+GenF4.menu.pnum.VCCGND_F407ZGT6Mini.build.board=VCCGND_F407ZGT6_MINI
+GenF4.menu.pnum.VCCGND_F407ZGT6Mini.build.product_line=STM32F407xx
+GenF4.menu.pnum.VCCGND_F407ZGT6Mini.build.variant=Generic_F407Zx
+
 # Generic F405RG
 GenF4.menu.pnum.Generic_F405RG=Generic F405RG
 GenF4.menu.pnum.Generic_F405RG.upload.maximum_size=1048576

variants/Generic_F407Zx/PinNamesVar.h

@@ -0,0 +1,50 @@
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+  SYS_WKUP1 = PA_0,
+#endif
+#ifdef PWR_WAKEUP_PIN2
+  SYS_WKUP2 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN3
+  SYS_WKUP3 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN4
+  SYS_WKUP4 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN5
+  SYS_WKUP5 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN6
+  SYS_WKUP6 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN7
+  SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+  SYS_WKUP8 = NC,
+#endif
+/* USB */
+#ifdef USBCON
+  USB_OTG_FS_SOF = PA_8,
+  USB_OTG_FS_VBUS = PA_9,
+  USB_OTG_FS_ID = PA_10,
+  USB_OTG_FS_DM = PA_11,
+  USB_OTG_FS_DP = PA_12,
+  USB_OTG_HS_ULPI_D0 = PA_3,
+  USB_OTG_HS_SOF = PA_4,
+  USB_OTG_HS_ULPI_CK = PA_5,
+  USB_OTG_HS_ULPI_D1 = PB_0,
+  USB_OTG_HS_ULPI_D2 = PB_1,
+  USB_OTG_HS_ULPI_D7 = PB_5,
+  USB_OTG_HS_ULPI_D3 = PB_10,
+  USB_OTG_HS_ULPI_D4 = PB_11,
+  USB_OTG_HS_ID = PB_12,
+  USB_OTG_HS_ULPI_D5 = PB_12,
+  USB_OTG_HS_ULPI_D6 = PB_13,
+  USB_OTG_HS_VBUS = PB_13,
+  USB_OTG_HS_DM = PB_14,
+  USB_OTG_HS_DP = PB_15,
+  USB_OTG_HS_ULPI_STP = PC_0,
+  USB_OTG_HS_ULPI_DIR = PC_2,
+  USB_OTG_HS_ULPI_NXT = PC_3,
+#endif

variants/Generic_F407Zx/ldscript.ld

@@ -0,0 +1,209 @@
+/*
+******************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**  Author		: Auto-generated by System Workbench for STM32
+**
+**  Abstract    : Linker script for STM32F407ZGTx series
+**                1024Kbytes FLASH and 192Kbytes RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Distribution: The file is distributed “as is,” without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+**   1. Redistributions of source code must retain the above copyright notice,
+**      this list of conditions and the following disclaimer.
+**   2. Redistributions in binary form must reproduce the above copyright notice,
+**      this list of conditions and the following disclaimer in the documentation
+**      and/or other materials provided with the distribution.
+**   3. Neither the name of STMicroelectronics nor the names of its contributors
+**      may be used to endorse or promote products derived from this software
+**      without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20020000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 128K
+CCMRAM (xrw)      : ORIGIN = 0x10000000, LENGTH = 64K
+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 1024K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  _siccmram = LOADADDR(.ccmram);
+
+  /* CCM-RAM section 
+  * 
+  * IMPORTANT NOTE! 
+  * If initialized variables will be placed in this section,
+  * the startup code needs to be modified to copy the init-values.  
+  */
+  .ccmram :
+  {
+    . = ALIGN(4);
+    _sccmram = .;       /* create a global symbol at ccmram start */
+    *(.ccmram)
+    *(.ccmram*)
+
+    . = ALIGN(4);
+    _eccmram = .;       /* create a global symbol at ccmram end */
+  } >CCMRAM AT> FLASH
+
+
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+