CppRobotics

This is the cpp implementation of the PythonRobotics

Requirment

• cmake
• opencv 3.3
• Eigen 3
• CppAD / IPOPT (for MPC convex optimization)
• ROS (To make the repo lightweight :))

Build

 $ mkdir build
 $ cd build
 $ cmake ../
 $ make -j 8

Find all the executable files in build/bin.

Table of Contents

• Localization
  • Extended kalmam filter
  • Particle filter
  • Histogram filter
• Mapping
  • Gaussian grid map
• SLAM
  • FastSLAM 1.0
• Path Planning
  • Dynamic Window Approach
  • Model Predictive Trajectory Generator
  • Cubic Spline Planner
  • State Lattice Planner
  • Frenet Frame Trajectory
• Path Tracking
  • LQR Sterring Control
  • LQR Speed and Steering Control
  • Model Predictive Speed and Steering Control

Localization

Extended Kalman Filter Localization

• green line: the groundtruth trajectory
• black line: dead reckoning
• red points: observations (e.g. GPS)
• blue line: estimated positions

Probabilistic Robotics

Particle Filter Localization

• green line: the groundtruth trajectory
• black line: dead reckoning
• red points: landmarks
• blue line: estimated positions

Probabilistic Robotics

Path Planning

Dynamic Window Approach

• blue circle: the target point
• red circle: the robot

The dynamic window approach to collision avoidance

Model Predictive Trajectory Generator

This part is based on the bicycle motion model.

• blue circle: the target point
• red circle: the initial point

Cubic Spline Planner

State Lattice Planner

• blue circle: the target point
• red circle: the initial point

State Space Sampling of Feasible Motions for High-Performance Mobile Robot Navigation in Complex Environments

Frenet Frame Trajectory

• black line: the planned spline path
• red circle: the obstacle
• blue circle: the planned trajectory
• green circle: the real-time position of robot

Optimal Trajectory Generation for Dynamic Street Scenarios in a Frenet Frame

Path Tracking

LQR Steering Control

• black line: the planned spline path
• red circle: the position under lqr control

LQR Speed and Steering Control

• black line: the planned spline path
• red circle: the position under lqr control

MPC Speed and Steering Control

• black line: the planned spline path
• blue line: the passed path
• yellow cross: the reference trajectory for MPC
  (To compile this part, you need to uncomment the related lines in CMakeLists.txt and install CppAD and IPOPT.)