Version 1.0.0

.gitignore

@@ -0,0 +1,2 @@
+log/*
+tmp/*

README.md

@@ -1,2 +1,109 @@
-# tgui_install
-Installation script for TacacsGUI
+# Installation script for TacacsGUI
+There is no need to worry about dependencies, packages or librarias now. All you need is clear **Ubuntu 16.4.x**.
+I hope it will be intuitive for you and you will enjoy installation process.
+
+## Requerements:
+1. **Ubuntu 16.4.x** (I will try to migrate to 18.4.x this year)
+2. **Pre-Installed LAMP Server and OpenSSH-Server**
+
+## Script does three steps:
+1. **Set Interface Settings** (you have to do that only once)
+2. **Install Dependencies**
+3. **Install Frameworks, Libraries, Web Interface and so on**
+
+## Prepare your script
+Added soon...
+
+### Step 1. Set Interface Settings :satellite:
+If it is you first installation, you have to prepare network interface for communication.
+From the main menu your choice is **3**, **Network Settings**.
+```
+###############################################################
+##############   TACACSGUI Installation Script    ##############
+###############################################################
+
+ver. 1.0.0
+
+##############     List of available options    ##############
+
+1) Install TacacsGUI       5) Clear and Refresh Menu
+2) Re-install TacacsGUI    6) Write to Log file
+3) Network Settings        7) Quit
+4) Test the System
+
+Please enter your choice (5 to clear output): 3
+```
+Now you have to select interface that will be the main one.
+Now you have to select interface that will be the main one. To show all available interfaces choose **1** (**Show Interface List**) and then choose **3** (**Configure interface**), type selected interface and finish network configuration settings.
+I hope it will be very intuitive for you and you will get success.
+```
+###############################################################
+##############   TACACSGUI Network Settings Script    #########
+###############################################################
+
+ver. 1.0.0
+
+##############     List of available options    ##############
+
+1) Show Interface List      4) Clear and Refresh Menu
+2) Show Interface Settings  5) Back to Main Menu
+3) Configure interface
+
+Please enter your choice (4 to clear output):
+```
+To return to **Main Menu** select **5**.
+### Step 2. Install Dependencies :see_no_evil:
+From the **Main Menu** select option number **1**, **Install TacacsGUI** (or Re-install TacacsGUI if required).
+On this step you doesn't need to do anything, just see as the script resolve all boring stuff.
+There are some checks on this step:
+1. Check network settings. If you did not do Step 1, script will notify you and this step will exit.
+2. Check installed packges. If some package missing, script will try to download and install it.
+3. Check connectivity to *github.com*.
+4. Check connectivity to *packagist.org* (Composer).
+5. Check connectivity to *tacacsgui.com*.
+6. Check tac_plus daemon existence. If tac_plus does not installed, script will try to install it for you. There is an archive inside of this package, downloaded from [the Marc's Hubert site](http://www.pro-bono-publico.de/projects/) (now it is *DEVEL.201903091339.tar.bz2*).
+7. Check PHP version. Now it is the latest version - 7.3. If your server does not have it, the script will try to resolve that issue for you.
+8. Check Pip. I can't just pass by Python, hope it will take more places in the project. As in the previous checks it will be installed if you don't have it yet.
+9. Check Composer. If you don't have it yet or have old version, it will installed.
+10. Check root access to two files: */opt/tacacsgui/tac_plus.sh* and */opt/tacacsgui/main.sh*. Do you know how to use `sudo visudo`? Don't worry script will do that for you.
+11. Check Ubuntu version. Unfornunately, only *16.4.x* supported.
+
+Ok. That all. If you finally see menu of Step 3, it means Step 2 was finished successfully! :sunglasses:
+### Step 3. Install Frameworks, Libraries, Web Interface and so on :hammer:
+It is here your help is needed. Script will ask you **MySQL root password** and if it is the first installation password for the *tgui_user*. :exclamation: Password containing special characters like !,&,\*,/ and so on will destroy the script, it is a bug. Please, set alphanumeric password. Sorry for inconvenience.:exclamation:
+```
+###############################################################
+##############   TACACSGUI Installation    #########
+###############################################################
+
+ver. 1.0.0
+
+
+Start Installation
+Check database...
+Try to get root password to MySQL...Not Found
+Enter root password to mysql:
+Done. Correct password
+Remember root password? (y/n): n
+...
+bla bla bla, some boring stuff
+...
+Tacacs Daemon setup...
+Test Daemon work...
+Done
+Final Check...Check main libraries...
+Done. Congratulation!
+Press any key to exit...
+```
+If you see the last three lines, like above, it is a time to check Web Interface!
+There are two ways:
+- **https**://*\<your ip address\>*:**4443**
+- **http**://*\<your ip address\>*:**8008**
+
+After installation I recommend to upgrade your system, use command `sudo apt-get full-upgrade -y` for that.
+
+Hope you will enjoy installation process and you does not meet any trouble.
+If you want to help, you are welcome! Also you can be my Patron [on Patreon](https://www.patreon.com/tacacsgui), you can stimulate me do updates more often.
+[<img src="https://tacacsgui.com/wp-content/uploads/2018/11/1000px-Patreon_logo_with_wordmark.png" width="40%">](https://www.patreon.com/tacacsgui)
+
+Best Regards, Aleksey

inc/apache2/tacacsgui.local-ssl.conf

@@ -0,0 +1,32 @@
+Listen 4443
+
+<IfModule mod_ssl.c>
+    <VirtualHost *:4443>
+        ServerAdmin developer@tacacsgui.com
+		ServerName tacacsgui.local
+        DocumentRoot /opt/tacacsgui/web/
+        ErrorLog /var/log/tacacsgui/apache2/error.log
+		CustomLog /var/log/tacacsgui/apache2/access.log combined
+        SSLEngine on
+        SSLCertificateFile /opt/tgui_data/ssl/tacacsgui.local.cer
+        SSLCertificateKeyFile /opt/tgui_data/ssl/tacacsgui.local.key
+        <FilesMatch "\.(cgi|shtml|phtml|php)$">
+                        SSLOptions +StdEnvVars
+        </FilesMatch>
+        <Directory /opt/tacacsgui/web/>
+			AllowOverride All
+			Allow from All
+			Require all granted
+			Options -Indexes
+                XSendFile On
+                XSendFilePath "/opt/tgui_data/backups"
+                XSendFilePath "/var/log/tacacsgui"
+                XSendFilePath "/opt/tacacsgui/temp"
+                XSendFilePath "/opt/tgui_data/confManager/configs"
+        </Directory>
+        BrowserMatch "MSIE [2-6]" \
+                        nokeepalive ssl-unclean-shutdown \
+                        downgrade-1.0 force-response-1.0
+        BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
+    </VirtualHost>
+</IfModule>

inc/apache2/tacacsgui.local.conf

@@ -0,0 +1,23 @@
+Listen 8008
+
+<VirtualHost *:8008>
+	ServerAdmin developer@tacacsgui.com
+	DocumentRoot /opt/tacacsgui/web
+
+	ErrorLog /var/log/tacacsgui/apache2/error.log
+	CustomLog /var/log/tacacsgui/apache2/access.log combined
+
+	<Directory "/opt/tacacsgui/web/">
+  		Allow from All
+		AllowOverride All
+		Require all granted
+		Options -Indexes
+                XSendFile On
+                XSendFilePath "/opt/tgui_data/backups"
+                XSendFilePath "/var/log/tacacsgui"
+                XSendFilePath "/opt/tacacsgui/temp"
+								XSendFilePath "/opt/tgui_data/confManager/configs"
+	</Directory>
+</VirtualHost>
+
+# vim: syntax=apache ts=4 sw=4 sts=4 sr noet