add cod.m Zigbee TCP

raw/esp32/cod.m_Zigbee_CZC-1.0_via_TCP/au

@@ -0,0 +1,12 @@
+# Ethernet Network Flipper - checks every 30 seconds if ethernet if up
+# if Ethernet is up, Wifi is turned off to avoid interference with Zigbee
+# if Ethernet is down, Wifi is turned back on to allow fallback connection
+def netflip()
+  var eth = tasmota.eth('up')                 #1
+  if tasmota.wifi('up') == eth                #2
+    tasmota.cmd('Wifi ' + (eth ? '0' : '1'))  #3
+  end
+  tasmota.set_timer(30000,netflip)            #4
+end
+tasmota.set_timer(30000,netflip)              #5
+

raw/esp32/cod.m_Zigbee_CZC-1.0_via_TCP/init.bat

@@ -0,0 +1,7 @@
+Template {"NAME":"cod.m Zigbee CZC-1.0 (via TCP)","GPIO":[0,0,1,0,5472,5536,0,0,576,1,288,1,0,0,5600,1,1,1,1,5568,1,1,1,1,0,0,0,0,0,1,1,32,5504,1,1,1],"FLAG":0,"BASE":1}
+Module 0
+EthType 0
+EthAddress 0
+EthClockMode 3
+Backlog rule1 on system#boot do TCPStart 8888 endon ; rule1 1 ; TCPStart 8888
+