TurboEON

Open Source DIY EON cooling solution for EON Dashcam DevKit from Comma.ai.

If you don't already have an EON Dashcam DevKit, you can buy one here: https://comma.ai/shop/products/eon-dashcam-devkit/

Please note the case is not yet modified for TurboEON so you will have to make some changes by cutting the case using blade or something else.

Printable—Included Parts

• FrEON Body Left

• FrEON Body Right

• FrEON Bottom Clip

• FrEON Fan Cover Grill

Printable mounts are under mount folder.

-If you need helping with size of mount, Please look at the following docs.

Printing source

• 3dhubs Make sure to get it printed in ABS. Case cost will be around $20+Shipping

Non-Printable Parts & Hardware

• 8 x M3x6mm screws

• 8 x M3 Nuts

• 3 x Rpi Heatsink with Fan

• 40x10mm 5V Blower

• 3M GoPro Mount

Case Credits

This is fork of FrEON credits @chase https://github.com/ch4se/OpenFrEON