Merge remote-tracking branch 'upstream/master' into dash (sonic-net#2663

)

*Merge remote-tracking branch 'upstream/master' into dash (sonic-net#2663)
* Modify coppmgr mergeConfig to support preserving copp tables through reboot. (sonic-net#2548)
* Avoid aborting orchagent when setting TUNNEL attributes (sonic-net#2591)
* Handle Mac address 'none' (sonic-net#2593)
* Increase diff coverage to 80% (sonic-net#2599)
* Add missing parameter to on_switch_shutdown_request method. (sonic-net#2567)
* Add ZMQ based ProducerStateTable and CustomerStateTable.
* Revert "[voq][chassis]Add show fabric counters port/queue commands (sonic-net#2522)" (sonic-net#2611)
* Added new attributes for Vnet and Vxlan ecmp configurations. (sonic-net#2584)
* added support for monitoring, primary and adv_prefix and overlay_dmac.
* [routesync] Fix for stale dynamic neighbor (sonic-net#2553)
* [MuxOrch] Enabling neighbor when adding in active state (sonic-net#2601)
* Changed the BFD default detect multiplier to 10x (sonic-net#2614)
* Remove TODO comments that are no longer relevant (sonic-net#2622)
* Fix issue #13341 ARP entry can be out of sync between kernel and APPL_DB if multiple updates are received from RTNL (sonic-net#2619)
* [refactor]Refactoring sai handle status (sonic-net#2621)
* Vxlan tunnel endpoint custom monitoring APPL DB table. (sonic-net#2589)
* added support for monitoring, primary and adv_prefix. changed filter_mac to overlay_dmac
* Data Structures and code to write APP_DB VNET_MONITOR table entries for custom monitoring of Vxlan tunnel endpoints.
* [bfdorch] add local discriminator to state DB (sonic-net#2629)
* [acl] Add new ACL key BTH_OPCODE and AETH_SYNDROME  (sonic-net#2617)
* [voq][chassis] Remove created ports from the default vlan. (sonic-net#2607)
* [EVPN]Handling race condition when remote VNI arrives before tunnel map entry (sonic-net#2642)
*Added check in remote VNI add to ensure vxlan tunnel map is created before adding the remote end point.
* [test_mux] add sleep in test_NH (sonic-net#2648)
* [autoneg]Fixing adv interface types to be set when AN is disabled (sonic-net#2638)
* [hash]: Add UT infra. (sonic-net#2660)
*Added UT infra for Generic Hash feature
*Aligned PBH tests with Generic Hash UT infra
* [sai_failure_dump]Invoking dump during SAI failure (sonic-net#2644)
* [ResponsePublisher] add pipeline support  (sonic-net#2511)
* [dash] Fix compilation issue caused by missing include.

orchagent/dash/dashorch.h

@@ -14,6 +14,7 @@
 #include "macaddress.h"
 #include "timer.h"
 #include "dashorch.h"
+#include "saihelper.h"
 
 struct ApplianceEntry
 {

orchagent/dash/dashvnetorch.cpp

@@ -17,6 +17,7 @@
 #include "saiextensions.h"
 #include "swssnet.h"
 #include "tokenize.h"
+#include "dashorch.h"
 
 using namespace std;
 using namespace swss;

orchagent/main.cpp

@@ -716,8 +716,9 @@ int main(int argc, char **argv)
         if (gMySwitchType == "voq")
         {
             orchDaemon->setFabricEnabled(true);
-            orchDaemon->setFabricPortStatEnabled(true);
-            orchDaemon->setFabricQueueStatEnabled(true);
+            // SAI doesn't fully support counters for non fabric asics
+            orchDaemon->setFabricPortStatEnabled(false);
+            orchDaemon->setFabricQueueStatEnabled(false);
         }
     }
     else

tests/mock_tests/test_failure_handling.cpp

@@ -52,7 +52,6 @@ namespace saifailure_test
         _hook_sai_switch_api();
         _sai_syncd_notifications_count = (uint32_t*)mmap(NULL, sizeof(int), PROT_READ | PROT_WRITE,
                     MAP_SHARED | MAP_ANONYMOUS, -1, 0);
-
         _sai_syncd_notification_event = (int32_t*)mmap(NULL, sizeof(int), PROT_READ | PROT_WRITE,
                     MAP_SHARED | MAP_ANONYMOUS, -1, 0);
         *_sai_syncd_notifications_count = 0;

tests/test_mux.py

@@ -897,6 +897,80 @@ def create_and_test_NH_routes(self, appdb, asicdb, dvs, dvs_route, mac):
         self.del_neighbor(dvs, neigh_ip)
         self.del_neighbor(dvs, neigh_ipv6)
 
+    def create_and_test_NH_routes(self, appdb, asicdb, dvs, dvs_route, mac):
+        '''
+        Tests case where neighbor is removed in standby and added in active with route
+        '''
+        nh_route = "2.2.2.0/24"
+        nh_route_ipv6 = "2023::/64"
+        neigh_ip = self.SERV1_IPV4
+        neigh_ipv6 = self.SERV1_IPV6
+        apdb = dvs.get_app_db()
+
+        # Setup
+        self.set_mux_state(appdb, "Ethernet0", "active")
+        self.add_neighbor(dvs, neigh_ip, mac)
+        self.add_neighbor(dvs, neigh_ipv6, mac)
+        dvs.runcmd(
+            "vtysh -c \"configure terminal\" -c \"ip route " + nh_route +
+            " " + neigh_ip + "\""
+        )
+        dvs.runcmd(
+            "vtysh -c \"configure terminal\" -c \"ipv6 route " + nh_route_ipv6 +
+            " " + neigh_ipv6 + "\""
+        )
+        apdb.wait_for_entry("ROUTE_TABLE", nh_route)
+        apdb.wait_for_entry("ROUTE_TABLE", nh_route_ipv6)
+
+        rtkeys = dvs_route.check_asicdb_route_entries([nh_route])
+        rtkeys_ipv6 = dvs_route.check_asicdb_route_entries([nh_route_ipv6])
+        self.check_nexthop_in_asic_db(asicdb, rtkeys[0])
+        self.check_nexthop_in_asic_db(asicdb, rtkeys_ipv6[0])
+
+        # Set state to standby and delete neighbor
+        self.set_mux_state(appdb, "Ethernet0", "standby")
+        self.check_nexthop_in_asic_db(asicdb, rtkeys[0], True)
+        self.check_nexthop_in_asic_db(asicdb, rtkeys_ipv6[0], True)
+
+        self.del_neighbor(dvs, neigh_ip)
+        self.del_neighbor(dvs, neigh_ipv6)
+        apdb.wait_for_deleted_entry(self.APP_NEIGH_TABLE, neigh_ip)
+        apdb.wait_for_deleted_entry(self.APP_NEIGH_TABLE, neigh_ipv6)
+        asicdb.wait_for_deleted_entry(self.ASIC_NEIGH_TABLE, neigh_ip)
+        asicdb.wait_for_deleted_entry(self.ASIC_NEIGH_TABLE, neigh_ip)
+
+        self.check_nexthop_in_asic_db(asicdb, rtkeys[0], True)
+        self.check_nexthop_in_asic_db(asicdb, rtkeys_ipv6[0], True)
+
+        # Set state to active, learn neighbor again
+        self.set_mux_state(appdb, "Ethernet0", "active")
+
+        self.add_neighbor(dvs, neigh_ip, mac)
+        self.add_neighbor(dvs, neigh_ipv6, mac)
+        self.check_neigh_in_asic_db(asicdb, neigh_ip)
+        self.check_neigh_in_asic_db(asicdb, neigh_ipv6)
+
+        self.check_nexthop_in_asic_db(asicdb, rtkeys[0])
+        self.check_nexthop_in_asic_db(asicdb, rtkeys_ipv6[0])
+        dvs.runcmd(
+            "ip neigh flush " + neigh_ip
+        )
+        dvs.runcmd(
+            "ip neigh flush " + neigh_ipv6
+        )
+
+        # Cleanup
+        dvs.runcmd(
+            "vtysh -c \"configure terminal\" -c \"no ip route " + nh_route +
+            " " + neigh_ip + "\""
+        )
+        dvs.runcmd(
+            "vtysh -c \"configure terminal\" -c \"no ipv6 route " + nh_route_ipv6 +
+            " " + neigh_ipv6 + "\""
+        )
+        self.del_neighbor(dvs, neigh_ip)
+        self.del_neighbor(dvs, neigh_ipv6)
+
     def get_expected_sai_qualifiers(self, portlist, dvs_acl):
         expected_sai_qualifiers = {
             "SAI_ACL_ENTRY_ATTR_PRIORITY": self.ACL_PRIORITY,

tests/test_vnet.py

@@ -3428,6 +3428,37 @@ def test_vnet_orch_24(self, dvs, testlog):
         # delete vxlan tunnel
         delete_vxlan_tunnel(dvs, tunnel_name)
 
+    '''
+    Test 18 - Test for vxlan custom monitoring config.
+    '''
+    def test_vnet_orch_18(self, dvs, testlog):
+        vnet_obj = self.get_vnet_obj()
+
+        tunnel_name = 'tunnel_18'
+
+        vnet_obj.fetch_exist_entries(dvs)
+
+        create_vxlan_tunnel(dvs, tunnel_name, '9.9.9.9')
+        create_vnet_entry(dvs, 'Vnet18', tunnel_name, '10009', "", overlay_dmac="22:33:33:44:44:66")
+
+        vnet_obj.check_vnet_entry(dvs, 'Vnet18')
+        vnet_obj.check_vxlan_tunnel_entry(dvs, tunnel_name, 'Vnet18', '10009')
+
+        vnet_obj.check_vxlan_tunnel(dvs, tunnel_name, '9.9.9.9')
+
+        vnet_obj.fetch_exist_entries(dvs)
+        create_vnet_routes(dvs, "100.100.1.1/32", 'Vnet18', '9.0.0.1,9.0.0.2,9.0.0.3', ep_monitor='9.1.0.1,9.1.0.2,9.1.0.3',primary ='9.0.0.1',monitoring='custom', adv_prefix='100.100.1.1/27')
+
+        vnet_obj.check_custom_monitor_app_db(dvs, "100.100.1.1/32", "9.1.0.1", "vxlan", "22:33:33:44:44:66")
+        vnet_obj.check_custom_monitor_app_db(dvs, "100.100.1.1/32", "9.1.0.2", "vxlan", "22:33:33:44:44:66")
+        vnet_obj.check_custom_monitor_app_db(dvs, "100.100.1.1/32", "9.1.0.3", "vxlan", "22:33:33:44:44:66")
+
+        delete_vnet_routes(dvs, "100.100.1.1/32", 'Vnet18')
+
+        vnet_obj.check_custom_monitor_deleted(dvs, "100.100.1.1/32", "9.1.0.1")
+        vnet_obj.check_custom_monitor_deleted(dvs, "100.100.1.1/32", "9.1.0.2")
+        vnet_obj.check_custom_monitor_deleted(dvs, "100.100.1.1/32", "9.1.0.3")
+
 # Add Dummy always-pass test at end as workaroud
 # for issue when Flaky fail on final test it invokes module tear-down before retrying
 def test_nonflaky_dummy():