nix-configs

My Nix{OS} configuration files

Overview

• nix configuration for my laptops, desktops and more
• nix flake-powered
• guaranteed to be reproducible

Disclaimer

This config is not based on any previous available Flake-based Nix{OS} config, instead I choose to develop my own from the available examples and documentation. Some of the repositories that helped me to build this config:

• https://github.com/bqv/nixrc
• https://github.com/colemickens/nixcfg
• https://github.com/hlissner/dotfiles
• https://github.com/Mic92/dotfiles
• https://github.com/nrdxp/nixflk

Also, some extra resources and documentation about Flakes:

• Flakes in NixOS Wiki
• Nix Flakes blog posts from @eldostra
• Nix documentation

Remember: Flakes is experimental, so you shouldn't try this approach until you have some experience in Nix.

Dotfiles

This repository also includes my home-manager configuration. It is used to configure home in NixOS systems (using home-manager as a NixOS module) but it should also work in standalone mode.

Installation

NixOS

After following the instructions in manual to prepare the system and partition the disk, run the following process to install:

$ sudo git clone https://github.com/thiagokokada/nix-configs/ /mnt/etc/nixos
$ sudo chown -R 1000:100 /mnt/etc/nixos # optional if you want to edit your config without root
$ nix flake new --template '.#new-host' # if this is a new hardware
$ sudo nixos-install --flake /mnt/etc/nixos#hostname

After installing it succesfully and rebooting, you can uncomment everything and trigger a rebuild.

Remote installations

You can also do remote installations by using --target-host flag in nixos-rebuild (from any machine that already has NixOS installed):

$ nixos-rebuild switch --flake '.#hostname' --target-host root@hostname --use-substitutes

Or if you don't have root access via SSH (keep in kind that the user needs to have sudo permissions instead):

$ nixos-rebuild switch --flake '.#hostname' --target-host user@hostname --use-substitutes --use-remote-sudo

Another option for a few hosts is to use nixos-anywhere. This need to be a host with disko configured. In this case, you can just run:

$ nix run github:numtide/nixos-anywhere -- --flake '.#hostname' root@hostname

nix-darwin

Start by installing Nix:

$ sh <(curl -L https://nixos.org/nix/install) --daemon

To build the Home Manager standalone and activate its configuration, run:

$ nix run '.#darwinActivations/<hostname>'

Home Manager (standalone)

Start by installing Nix:

$ sh <(curl -L https://nixos.org/nix/install) --daemon

To build the Home Manager standalone and activate its configuration, run:

$ nix run '.#homeActivations/<hostname>'

Testing

You can build a VM to test NixOS configurations with safety running the command below:

$ nix run '.#nixosVMs/<hostname>'

Explore

You can explore all outputs from this configuration by using:

$ nix flake show