Warning
This is a work in progress and parts list will likely change.
To configure this firmware, enable options in DIY_Prusa_Mini_Configuration.h
. No other config file editing is required!
To build this firmware, you'll need Visual Studio Code with PlatformIO. Detailed setup instructions can be found in the Installing Marlin (PlatformIO with VSCode) guide.
This firmware is configured for a DIY Prusa Mini powered by the following hardware:
- BigTreeTech SKR Mini E3 V3/V3.01 or BigTreeTech SKR Mini E3 V2
- Modded Prusa Mini control box (link tbd)