-
Notifications
You must be signed in to change notification settings - Fork 341
Tasks Build a C compiler for EBC
Build a C compiler that is able to generate EBC (EFI Byte Code)
🔴 This project is not recommended as the relevance of EBC has waned. 🔴
- Difficulty: Hard
- Language: C, Assembly
- Mentor:
- Suggested by: @nate-desimone
EBC is no longer required by the UEFI spec, which has caused its use for cross-architecture OpROMs to asymptotically approach zero.
EBC (EFI Byte Code) is an interpreted intermediate language for building processor independent UEFI device drivers. Unlike most other intermediate languages, EBC was primarily designed for compiling portable C code in an architecture independent way. The reason it was invented is to enable PCIe add-in card vendors to build universal Option ROMs (OpROMs) that function on multiple native instruction set architectures. For example, a PCIe add-in card with a EBC OpROM would be able to work out-of-box on both a regular 64-bit x86 PC and a ARM microserver.
Historically, there are some old proposals for EBC usage that never materialized. It was suggested that an EBC interpreter could be added to operating systems to enable EBC device drivers to be used in the OS as a "plan B" for when OS native drivers are not available. The two use cases considered were graphics and network. EBC graphics drivers would be used for basic display output immediately after the OS was installed, but before the user has been able to install OS native graphics drivers. The currently used UEFI GOP drivers provide this capability as well, but EBC graphics drivers would have enabled resolution changes at runtime, similar to legacy VGA BIOS. This feature that was lost when the industry moved to UEFI GOP drivers. UEFI UNDIs could be used as a basic network drivers for cases where the OS media did not have the needed network drivers in-box. The UNDI would allow the system to access the Internet to download OS native drivers. Vincent Zimmer has a good history of EBC on his blog.
EBC has a unique feature that is not found in other intermediate languages, natural indexing. Natural indexing has made compiler development for EBC notoriously difficult. In EBC, there are several basic types that are variable in size. For example, the sizeof(void *)
as well as any other pointer type can vary at runtime. On 32-bit host systems like IA32, sizeof(void *)==4
. On 64-bit systems like X64 or AARCH64, sizeof(void *)==8
. The UEFI specific integer data type, UINTN
uses the same variable sizes as pointers in EBC.
The original EBC compiler is the Intel C Compiler for EFI Byte Code. This compiler is very expensive ($955) which has likely been the largest component in EBC's limited popularity. The usefulness of this compiler has waned since the development of EDK II. This compiler does not support LTO (Link Time Optimization). The LibraryClass dependency system in EDK II relies heavily on LTO in order to generate reasonably sized binaries.
Akira Moroo (@retrage) has done a great deal of work on developing an open source EBC compiler. He has made 2 attempts thus far and has talked about his work both on his blog and at Kernel/VM Tokyo 2019. His first attempt used ELVM but ultimately proved to be too limited due to ELVM's lack of a linker, requiring the entire program to come from a single .c file.
His second attempt uses Clang & LLVM. While this showed great promise, it has not been completed yet. One of the roadblocks at the time was the lack of a PE/COFF linker for LLVM. Since LLVM 9.0, the LLVM linker now supports PE/COFF output, making a version of clang that can output EBC more attainable. Rebasing his work up to the latest LLVM 11 is the recommended starting point for any future work.
Building: This project should ideally support all edk2 supported OSes when it is finished. Though Linux would likely be the easiest starting point since the existing LLVM work was done on Linux. Getting the compiler stable on Linux should be the first goal. Testing generated EBC binaries can be done with EmulatorPkg without the need for any emulation software like Qemu. @retrage has also created his own userspace ebcvm, however we would recommend EmulatorPkg over it since EmulatorPkg runs the exact EBC interpreter that will be used on real systems.
- https://github.com/yabits/llvm/tree/retrage/ebc
- https://translate.google.com/translate?hl=&sl=ja&tl=en&u=https%3A%2F%2Fretrage.github.io%2F2019%2F07%2F20%2Fllvm-backend-for-ebc.html
- https://speakerdeck.com/retrage/llvm-backend-development-for-efi-byte-code
- http://vzimmer.blogspot.com/2015/08/efi-byte-code.html
- https://github.com/tianocore/edk2/tree/master/EmulatorPkg
- https://github.com/yabits/ebcvm
- https://github.com/pbatard/fasmg-ebc
- https://github.com/retrage/elvm/tree/retrage/ebc-v2
Interested parties are welcome to discuss this project on edk2-devel.
Home
Getting Started with EDK II
Build Instructions
EDK II Platforms
EDK II Documents
EDK II Release Planning
Reporting Issues
Reporting Security Issues
Community Information
Inclusive Language
Additional Projects & Tasks
Training
Community Support
Community Virtual Meetings
GHSA GitHub Security Advisories Proceess (Draft)