This example demonstrates how to transmit CAN messages over the CAN bus using XMC MCU. This example can be used with the CAN Receiver example running on another board.

This code example demonstrates the use of CCU4 module in XMC MCU to create a PWM signal. The CCU4 slice is configured in monoshot mode and is restarted on an external start event.

This code example demonstrates the usage of the Capture and Compare Unit 4 (CCU4) timer by blinking an LED using CCU4 timer period match interrupt available in XMC MCU.

mtb-example-xmc-hrpwm-hrc

This code example will demonstrate how to switch XMC4000 micro-controllers power mode to hibernate state.

This code example demonstrates the capture feature of Capture and Compare unit (CCU8) slices available in XMC MCU.

This code example demonstrates GPIO toggling by periodically blinking an LED using SysTick available in XMC MCU.

This example demonstrates the transfer of data from the flash to the RAM using the GPDMA peripheral.

This empty application provides a template for creating applications using XMC MCU.

This example demonstrates how to convert multiple channels in a dedicated sequence using the queue source in VADC.

This code example demonstrates the transfer of 3 bytes of data using SPI Master in XMC MCU.

This code example demonstrates the concatenation or linking feature of the Capture and Compare Unit 8 (CCU8) slices available in XMC MCU.

This code example demonstrates brownout detection by reducing power supply voltage from 3.3 V to the defined voltage threshold using brownout detection available in XMC MCU devices.

This code example demonstrates how to configure the GPIO registers using GPDMA.

This code example demonstrates the usage of Capture-Compare Unit 8 (CCU8) in the XMC MCU in timer mode. The CCU8 timer slice program blinks an LED when a timer period match interrupt occurs.

This code example demonstrates simple UART communication by printing periodic "Hello World!!" message on a terminal and blinking an LED. The message can be seen on a PC terminal.

This code example demonstrates the concatenation or linking feature of the Capture and Compare Unit 4 (CCU4) slices available in XMC MCU.

This example demonstrates how to receive CAN messages over the CAN bus using XMC MCU. This example can be used together with the CAN Transmitter example running on another board.