This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.

C++ class to parse 81 different NMEA0183 sentences

Material für den NMEA2000-Workshop.

An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.

A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !

Broadcast NMEA 0183 data over Wi-Fi using the ESP8266

Open Source Wireless remote for Raymarine ST1000/ST2000 autopilots as well as ST60 speed timer.

A c++ library to get NMEA information from modules which use NMEA 0183 over serial communication.

Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.

Combination of NMEA2000 WiFi gateway with power and heater control.

Raymarine Autopilot Plugin for OpenCPN

A collection of FMU sensor models and NMEA sender written in C++

another seatalk nmea multiplexer arduino base

device / protocol / gps / gnss tester

Arduino library for reading and writing GPS/GNSS receivers with NMEA output.

Manage nmea0183 frame

NMEA-0183 XDR Sensors on ESP32 m5atomS3-lite

Connect Matsutec AR-10 AIS receiver or any other NMEA USB devices to Wifi network

This project is all about building a wind display with a waterproofed Enhanced Nextion 3,5" display and and Arduino Nano clone.