This example demonstrates the different OPA peripheral modes of operation. This firmware is pre-loaded onto the Q41 Curiosity Nano development boards.
-
Updated
Oct 31, 2023 - C
This example demonstrates the different OPA peripheral modes of operation. This firmware is pre-loaded onto the Q41 Curiosity Nano development boards.
This MCC based MPLAB X example shows how to calibrate the gain and offset of the OPAMP when configured as a Programmable Gain Amplifier (PGA). The internal DAC and ADC are used to perform the calibration procedure. No external components are required.
This MCC based MPLAB X IDE example shows how to use the Analog Signal Conditioning (OPAMP) peripheral to implement a constant-current driver using just one external resistor. The constant current amperage setting can be adjusted using firmware control.
Operational Amplifier laboratory with the laboratory experiment pdf. A collection of codes, data, and computations.
Perform circuit analysis through hand calculation, then verify the calculation through OrCAD simulation and real-world measurements.
Design of various circuits using operational amplifiers
Add a description, image, and links to the operational-amplifier topic page so that developers can more easily learn about it.
To associate your repository with the operational-amplifier topic, visit your repo's landing page and select "manage topics."