v1.0.8

Changes

• Added new calculated sensor Recycle efficiency

Maintenance

• Bump actions/upload-artifact from 4.4.0 to 4.5.0 @dependabot (#54)

v1.0.7

Changes

• Downgrade pymodbus to 3.7.4, same as HA core v2025.1. Note, the dev branch of HA core has bumped pymodbus to 3.8.3 PR 134809

v1.0.6

Changes

• Replaced Config alias with ConfigType (#49)
• Replace BinaryPayloadDecoder with ModbusClientMixin.convert_from_registers
• Fixed missing state classes
• Added Last Seen sensor (#47)

Dependencies

• Bump actions/upload-artifact from 4.3.3 to 4.4.0 @dependabot (#46)
• Bump pymodbus to 3.8.3 (#50)
• Bump devcontainer to python:3.13

v1.0.6-beta.1

Changes

• Update pymodbus 3.8.3
• Update devcontainer python:3.13
• Replace Config alias with ConfigType

v1.0.5

Changes

• Add cooler accessory switch and alarm #23
• Add missing on/off feature toggles #35
• Replace depricated async_add_job

Maintenance

• Bump softprops/action-gh-release from 1 to 2 @dependabot (#39)

v1.0.4

Changes

• Added debug mode to enable use of breakpoints when debugging @KThaulow (#37)

Dependencies

• Bump actions/upload-artifact from 3.1.3 to 4.3.3 @dependabot (#38)
• Bump actions/setup-python from 4 to 5 @dependabot (#24)
• Bump release-drafter/release-drafter from 5 to 6 @dependabot (#31)

Maintenance

• Bump actions/upload-artifact from 3.1.3 to 4.3.3 @dependabot (#38)
• Bump actions/setup-python from 4 to 5 @dependabot (#24)
• Bump release-drafter/release-drafter from 5 to 6 @dependabot (#31)

v1.0.3

Changes

• Permanent fix for reading signed ints from modbus registers #17

Maintenance

• Bump actions/checkout from 3 to 4 @dependabot (#22)
• Bump actions/upload-artifact from 3.1.2 to 3.1.3 @dependabot (#21)
• Bump pymodbus to v3.5.4

v1.0.3-beta.2

Changes

• Permanent fix for reading signed ints from modbus registeres #17

Maintenance

• Bump actions/checkout from 3 to 4 @dependabot (#22)
• Bump actions/upload-artifact from 3.1.2 to 3.1.3 @dependabot (#21)
• Bump pymodbus to v3.5.4

v1.0.2

Changes

• Add power switch (address 0) @magicus (#19)
• Default port (502) when adding a new device
• Temporary fix for signed int
• Bump pymodbus to 3.3.2

v1.0.1

Changes

• Fix error when configuring the HERU device #14
• Changed icon for Night cooling enabled and Night cooling active