Merge tag 'mmc-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC host:

   - sdhci-of-esdhc: Fix card detection
   - dw_mmc: Fix DMA error path"

* tag 'mmc-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc: fix the error handling for dma operation
  mmc: sdhci-of-esdhc: fixup PRESENT_STATE read

drivers/mmc/host/dw_mmc.c

@@ -1058,6 +1058,7 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
 	spin_unlock_irqrestore(&host->irq_lock, irqflags);
 
 	if (host->dma_ops->start(host, sg_len)) {
+		host->dma_ops->stop(host);
 		/* We can't do DMA, try PIO for this one */
 		dev_dbg(host->dev,
 			"%s: fall back to PIO mode for current transfer\n",

drivers/mmc/host/sdhci-of-esdhc.c

@@ -66,6 +66,20 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
 			return ret;
 		}
 	}
+	/*
+	 * The DAT[3:0] line signal levels and the CMD line signal level are
+	 * not compatible with standard SDHC register. The line signal levels
+	 * DAT[7:0] are at bits 31:24 and the command line signal level is at
+	 * bit 23. All other bits are the same as in the standard SDHC
+	 * register.
+	 */
+	if (spec_reg == SDHCI_PRESENT_STATE) {
+		ret = value & 0x000fffff;
+		ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
+		ret |= (value << 1) & SDHCI_CMD_LVL;
+		return ret;
+	}
+
 	ret = value;
 	return ret;
 }

drivers/mmc/host/sdhci.h

@@ -73,6 +73,7 @@
 #define  SDHCI_DATA_LVL_MASK	0x00F00000
 #define   SDHCI_DATA_LVL_SHIFT	20
 #define   SDHCI_DATA_0_LVL_MASK	0x00100000
+#define  SDHCI_CMD_LVL		0x01000000
 
 #define SDHCI_HOST_CONTROL	0x28
 #define  SDHCI_CTRL_LED		0x01