update to latest

Documentation/devicetree/bindings/input/atmel,maxtouch.txt

@@ -0,0 +1,25 @@
+Atmel maXTouch touchscreen/touchpad
+
+Required properties:
+- compatible:
+    atmel,maxtouch
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touch controller CHG/IRQ output
+    See ../interrupt-controller/interrupts.txt
+
+Optional properties for maXTouch device:
+
+- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
+    keycode generated by each GPIO. Linux keycodes are defined in
+    <dt-bindings/input/input.h>.
+
+Example:
+
+	touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio>;
+		interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+	};

arch/arm/mach-s5pv210/mach-goni.c

@@ -239,14 +239,6 @@ static void __init goni_radio_init(void)
 
 /* TSP */
 static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 17,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x21,
-	.threshold	= 0x28,
-	.voltage	= 2800000,              /* 2.8V */
-	.orient		= MXT_DIAGONAL,
 	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 

drivers/input/touchscreen/Kconfig

@@ -89,6 +89,7 @@ config TOUCHSCREEN_AD7879_SPI
 config TOUCHSCREEN_ATMEL_MXT
 	tristate "Atmel mXT I2C Touchscreen"
 	depends on I2C
+	select FW_LOADER
 	help
 	  Say Y here if you have Atmel mXT series I2C touchscreen,
 	  such as AT42QT602240/ATMXT224, connected to your system.