Update xpad.c #136

linbingchen007 · 2014-11-15T07:10:12Z

the abs_y and the abs_ry should negate the val and add 1 because it's the complement of the origin variable

eljonny · 2014-11-15T10:11:29Z

FYI, from everything I've seen, pull requests are not reviewed on GitHub.
Info here on the community process:
https://github.com/torvalds/linux/blob/master/Documentation/HOWTO

In the loop of ftrace_save_ops_tramp_hash(), it adds all the recs to the ops hash if the rec has only one callback attached and the ops is connected to the rec. It gives a nasty warning and shuts down ftrace if the rec doesn't have a trampoline set for it. But this can happen with the following scenario: # cd /sys/kernel/debug/tracing # echo schedule do_IRQ > set_ftrace_filter # mkdir instances/foo # echo schedule > instances/foo/set_ftrace_filter # echo function_graph > current_function # echo function > instances/foo/current_function # echo nop > instances/foo/current_function The above would then trigger the following warning and disable ftrace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3145 at kernel/trace/ftrace.c:2212 ftrace_run_update_code+0xe4/0x15b() Modules linked in: ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ip [...] CPU: 1 PID: 3145 Comm: bash Not tainted 3.16.0-rc3-test+ torvalds#136 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000000 ffffffff81808a88 ffffffff81502130 0000000000000000 ffffffff81040ca1 ffff880077c08000 ffffffff810bd286 0000000000000001 ffffffff81a56830 ffff88007a041be0 ffff88007a872d60 00000000000001be Call Trace: [<ffffffff81502130>] ? dump_stack+0x4a/0x75 [<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97 [<ffffffff810bd286>] ? ftrace_run_update_code+0xe4/0x15b [<ffffffff810bd286>] ? ftrace_run_update_code+0xe4/0x15b [<ffffffff810bda1a>] ? ftrace_shutdown+0x11c/0x16b [<ffffffff810bda87>] ? unregister_ftrace_function+0x1e/0x38 [<ffffffff810cc7e1>] ? function_trace_reset+0x1a/0x28 [<ffffffff810c924f>] ? tracing_set_tracer+0xc1/0x276 [<ffffffff810c9477>] ? tracing_set_trace_write+0x73/0x91 [<ffffffff81132383>] ? __sb_start_write+0x9a/0xcc [<ffffffff8120478f>] ? security_file_permission+0x1b/0x31 [<ffffffff81130e49>] ? vfs_write+0xac/0x11c [<ffffffff8113115d>] ? SyS_write+0x60/0x8e [<ffffffff81508112>] ? system_call_fastpath+0x16/0x1b ---[ end trace 938c4415cbc7dc96 ]--- ------------[ cut here ]------------ Link: http://lkml.kernel.org/r/20140723120805.GB21376@redhat.com Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

linbingchen007 · 2014-12-05T14:33:46Z

the abs_y and the abs_ry should negate the val and add 1 because it's the complement of the origin variable

Elizafox · 2015-01-08T13:49:26Z

Linus doesn't accept pull requests from GitHub. Consult https://github.com/torvalds/linux/blob/master/Documentation/HOWTO instead.

By moving the rcu_nocb_gp_cleanup() call out of the rnp->lock protected region we avoid a deadlock as lockdep reported. swake_up_all() is toggling IRQ enable/disable. That means we might start processing soft IRQs. __do_softirq() calls rcu_process_callbacks() which wants to grab nrp->lock. ================================= [ INFO: inconsistent lock state ] 4.2.0-rc5-00025-g9a73ba0 torvalds#136 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rcu_preempt/8 [HC0[0]:SC0[0]:HE1:SE1] takes: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 {IN-SOFTIRQ-W} state was registered at: [<ffffffff81109b9f>] __lock_acquire+0xd5f/0x21e0 [<ffffffff8110be0f>] lock_acquire+0xdf/0x2b0 [<ffffffff81841cc9>] _raw_spin_lock_irqsave+0x59/0xa0 [<ffffffff81136991>] rcu_process_callbacks+0x141/0x3c0 [<ffffffff810b1a9d>] __do_softirq+0x14d/0x670 [<ffffffff810b2214>] irq_exit+0x104/0x110 [<ffffffff81844e96>] smp_apic_timer_interrupt+0x46/0x60 [<ffffffff81842e70>] apic_timer_interrupt+0x70/0x80 [<ffffffff810dba66>] rq_attach_root+0xa6/0x100 [<ffffffff810dbc2d>] cpu_attach_domain+0x16d/0x650 [<ffffffff810e4b42>] build_sched_domains+0x942/0xb00 [<ffffffff821777c2>] sched_init_smp+0x509/0x5c1 [<ffffffff821551e3>] kernel_init_freeable+0x172/0x28f [<ffffffff8182cdce>] kernel_init+0xe/0xe0 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 irq event stamp: 76 hardirqs last enabled at (75): [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 hardirqs last disabled at (76): [<ffffffff8184116f>] _raw_spin_lock_irq+0x1f/0x90 softirqs last enabled at (0): [<ffffffff810a8df2>] copy_process.part.26+0x602/0x1cf0 softirqs last disabled at (0): [< (null)>] (null) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rcu_node_1); <Interrupt> lock(rcu_node_1); *** DEADLOCK *** 1 lock held by rcu_preempt/8: #0: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 stack backtrace: CPU: 0 PID: 8 Comm: rcu_preempt Not tainted 4.2.0-rc5-00025-g9a73ba0 torvalds#136 Hardware name: Dell Inc. PowerEdge R820/066N7P, BIOS 2.0.20 01/16/2014 0000000000000000 000000006d7e67d8 ffff881fb081fbd8 ffffffff818379e0 0000000000000000 ffff881fb0812a00 ffff881fb081fc38 ffffffff8110813b 0000000000000000 0000000000000001 ffff881f00000001 ffffffff8102fa4f Call Trace: [<ffffffff818379e0>] dump_stack+0x4f/0x7b [<ffffffff8110813b>] print_usage_bug+0x1db/0x1e0 [<ffffffff8102fa4f>] ? save_stack_trace+0x2f/0x50 [<ffffffff811087ad>] mark_lock+0x66d/0x6e0 [<ffffffff81107790>] ? check_usage_forwards+0x150/0x150 [<ffffffff81108898>] mark_held_locks+0x78/0xa0 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff81108a28>] trace_hardirqs_on_caller+0x168/0x220 [<ffffffff81108aed>] trace_hardirqs_on+0xd/0x10 [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810fd1c7>] swake_up_all+0xb7/0xe0 [<ffffffff811386e1>] rcu_gp_kthread+0xab1/0xeb0 [<ffffffff811089bf>] ? trace_hardirqs_on_caller+0xff/0x220 [<ffffffff81841341>] ? _raw_spin_unlock_irq+0x41/0x60 [<ffffffff81137c30>] ? rcu_barrier+0x20/0x20 [<ffffffff810d2014>] kthread+0x104/0x120 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: linux-kernel@vger.kernel.org

rcu_nocb_gp_cleanup() is called while holding rnp->lock. Currently, this is okay because the wake_up_all() in rcu_nocb_gp_cleanup() will not enable the IRQs. lockdep is happy. By switching over using swait this is not true anymore. swake_up_all() enables the IRQs while processing the waiters. __do_softirq() can now run and will eventually call rcu_process_callbacks() which wants to grap nrp->lock. Let's move the rcu_nocb_gp_cleanup() call outside the lock before we switch over to swait. If we would hold the rnp->lock and use swait, lockdep reports following: ================================= [ INFO: inconsistent lock state ] 4.2.0-rc5-00025-g9a73ba0 torvalds#136 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rcu_preempt/8 [HC0[0]:SC0[0]:HE1:SE1] takes: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 {IN-SOFTIRQ-W} state was registered at: [<ffffffff81109b9f>] __lock_acquire+0xd5f/0x21e0 [<ffffffff8110be0f>] lock_acquire+0xdf/0x2b0 [<ffffffff81841cc9>] _raw_spin_lock_irqsave+0x59/0xa0 [<ffffffff81136991>] rcu_process_callbacks+0x141/0x3c0 [<ffffffff810b1a9d>] __do_softirq+0x14d/0x670 [<ffffffff810b2214>] irq_exit+0x104/0x110 [<ffffffff81844e96>] smp_apic_timer_interrupt+0x46/0x60 [<ffffffff81842e70>] apic_timer_interrupt+0x70/0x80 [<ffffffff810dba66>] rq_attach_root+0xa6/0x100 [<ffffffff810dbc2d>] cpu_attach_domain+0x16d/0x650 [<ffffffff810e4b42>] build_sched_domains+0x942/0xb00 [<ffffffff821777c2>] sched_init_smp+0x509/0x5c1 [<ffffffff821551e3>] kernel_init_freeable+0x172/0x28f [<ffffffff8182cdce>] kernel_init+0xe/0xe0 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 irq event stamp: 76 hardirqs last enabled at (75): [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 hardirqs last disabled at (76): [<ffffffff8184116f>] _raw_spin_lock_irq+0x1f/0x90 softirqs last enabled at (0): [<ffffffff810a8df2>] copy_process.part.26+0x602/0x1cf0 softirqs last disabled at (0): [< (null)>] (null) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rcu_node_1); <Interrupt> lock(rcu_node_1); *** DEADLOCK *** 1 lock held by rcu_preempt/8: #0: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 stack backtrace: CPU: 0 PID: 8 Comm: rcu_preempt Not tainted 4.2.0-rc5-00025-g9a73ba0 torvalds#136 Hardware name: Dell Inc. PowerEdge R820/066N7P, BIOS 2.0.20 01/16/2014 0000000000000000 000000006d7e67d8 ffff881fb081fbd8 ffffffff818379e0 0000000000000000 ffff881fb0812a00 ffff881fb081fc38 ffffffff8110813b 0000000000000000 0000000000000001 ffff881f00000001 ffffffff8102fa4f Call Trace: [<ffffffff818379e0>] dump_stack+0x4f/0x7b [<ffffffff8110813b>] print_usage_bug+0x1db/0x1e0 [<ffffffff8102fa4f>] ? save_stack_trace+0x2f/0x50 [<ffffffff811087ad>] mark_lock+0x66d/0x6e0 [<ffffffff81107790>] ? check_usage_forwards+0x150/0x150 [<ffffffff81108898>] mark_held_locks+0x78/0xa0 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff81108a28>] trace_hardirqs_on_caller+0x168/0x220 [<ffffffff81108aed>] trace_hardirqs_on+0xd/0x10 [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810fd1c7>] swake_up_all+0xb7/0xe0 [<ffffffff811386e1>] rcu_gp_kthread+0xab1/0xeb0 [<ffffffff811089bf>] ? trace_hardirqs_on_caller+0xff/0x220 [<ffffffff81841341>] ? _raw_spin_unlock_irq+0x41/0x60 [<ffffffff81137c30>] ? rcu_barrier+0x20/0x20 [<ffffffff810d2014>] kthread+0x104/0x120 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-5-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

…eckpatch-fixes WARNING: do not add new typedefs torvalds#86: FILE: arch/powerpc/include/asm/elf_util.h:35: +typedef unsigned long func_desc_t; WARNING: do not add new typedefs torvalds#90: FILE: arch/powerpc/include/asm/elf_util.h:39: +typedef struct ppc64_opd_entry func_desc_t; WARNING: Block comments use * on subsequent lines torvalds#94: FILE: arch/powerpc/include/asm/elf_util.h:43: +/* Like PPC32, we need little trampolines to do > 24-bit jumps (into + the kernel itself). But on PPC64, these need to be used for every WARNING: Block comments use a trailing */ on a separate line torvalds#95: FILE: arch/powerpc/include/asm/elf_util.h:44: + jump, actually, to reset r2 (TOC+0x8000). */ ERROR: open brace '{' following struct go on the same line torvalds#97: FILE: arch/powerpc/include/asm/elf_util.h:46: +struct ppc64_stub_entry +{ WARNING: Block comments use a trailing */ on a separate line torvalds#100: FILE: arch/powerpc/include/asm/elf_util.h:49: + * so we don't have to modify the trampoline load instruction. */ WARNING: Block comments use * on subsequent lines torvalds#110: FILE: arch/powerpc/include/asm/elf_util.h:59: +/* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this + gives the value maximum span in an instruction which uses a signed WARNING: Block comments use a trailing */ on a separate line torvalds#111: FILE: arch/powerpc/include/asm/elf_util.h:60: + offset) */ WARNING: Block comments use * on subsequent lines torvalds#132: FILE: arch/powerpc/include/asm/module.h:18: +/* Both low and high 16 bits are added as SIGNED additions, so if low + 16 bits has high bit set, high 16 bits must be adjusted. These WARNING: Block comments use a trailing */ on a separate line torvalds#133: FILE: arch/powerpc/include/asm/module.h:19: + macros do that (stolen from binutils). */ WARNING: space prohibited between function name and open parenthesis '(' torvalds#136: FILE: arch/powerpc/include/asm/module.h:22: +#define PPC_HA(v) PPC_HI ((v) + 0x8000) ERROR: Macros with complex values should be enclosed in parentheses torvalds#136: FILE: arch/powerpc/include/asm/module.h:22: +#define PPC_HA(v) PPC_HI ((v) + 0x8000) WARNING: please, no spaces at the start of a line torvalds#210: FILE: arch/powerpc/kernel/elf_util_64.c:32: + (((1 << (((other) & STO_PPC64_LOCAL_MASK) >> STO_PPC64_LOCAL_BIT)) >> 2) << 2)$ WARNING: Block comments use a trailing */ on a separate line torvalds#216: FILE: arch/powerpc/kernel/elf_util_64.c:38: + * of function and try to derive r2 from it). */ WARNING: line over 80 characters torvalds#357: FILE: arch/powerpc/kernel/elf_util_64.c:179: + value = stub_for_addr(elf_info, value, obj_name); WARNING: line over 80 characters torvalds#363: FILE: arch/powerpc/kernel/elf_util_64.c:185: + squash_toc_save_inst(strtab + sym->st_name, value); ERROR: space required before the open brace '{' torvalds#369: FILE: arch/powerpc/kernel/elf_util_64.c:191: + if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){ WARNING: line over 80 characters torvalds#560: FILE: arch/powerpc/kernel/module_64.c:341: + sechdrs[me->arch.elf_info.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); WARNING: line over 80 characters torvalds#613: FILE: arch/powerpc/kernel/module_64.c:380: + struct elf_shdr *stubs_sec = &elf_info->sechdrs[elf_info->stubs_section]; WARNING: line over 80 characters torvalds#889: FILE: arch/powerpc/kernel/module_64.c:498: + num_stubs = sechdrs[me->arch.elf_info.stubs_section].sh_size / sizeof(*entry); total: 3 errors, 17 warnings, 830 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/powerpc-factor-out-relocation-code-from-module_64c-to-elf_util_64c.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…is disabled Repeately turning on and off a layer, sometimes page fault occurs. This problem seems to happen, because of H/W malfunction during turning on the layer. But it can be solved by setting the framebuffer source size by 0. Kernel dump: [ 24.646472] PAGE FAULT occurred at 0x23000000 by 14650000.sysmmu(Page table base: 0x6d924000) [ 24.653515] Lv1 entry: 0x6e3b1001 [ 24.656945] ------------[ cut here ]------------ [ 24.661485] kernel BUG at drivers/iommu/exynos-iommu.c:358! [ 24.667030] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 24.672836] Modules linked in: [ 24.675872] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-00007-g838e0df torvalds#136 [ 24.683145] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 24.689214] task: c0e1aff0 ti: c0e0c000 task.ti: c0e0c000 [ 24.694597] PC is at exynos_sysmmu_irq+0x1b8/0x2c4 [ 24.699358] LR is at vprintk_emit+0x2a0/0x550 [ 24.703684] pc : [<c036e530>] lr : [<c00705d0>] psr: 60070193 [ 24.703684] sp : c0e0dd90 ip : 00000000 fp : c0e0ddcc [ 24.715121] r10: ee22e610 r9 : 00000000 r8 : ee22e628 [ 24.720321] r7 : ed875810 r6 : 23000000 r5 : ed924000 r4 : 00000000 [ 24.726820] r3 : c0e98098 r2 : 00000000 r1 : 00000000 r0 : ed6819c0 [ 24.733321] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 24.740685] Control: 10c5387d Table: 6cb8c06a DAC: 00000015 [ 24.746403] Process swapper/0 (pid: 0, stack limit = 0xc0e0c210) [ 24.752383] Stack: (0xc0e0dd90 to 0xc0e0e000) [ 24.756718] dd80: c0e0dd9c c0932868 ffff28da 6d924000 [ 24.764864] dda0: ffff2990 ee22d8c0 ee22f060 00000049 c0e34e34 c0e0c000 00000000 00000000 [ 24.773009] ddc0: c0e0de14 c0e0ddd0 c0071fd8 c036e384 ffffffff 7fffffff c0e0ddf4 ee22f000 [ 24.781155] dde0: c0e95dfc c0e95de8 c0e0de14 ee22f000 ee22f060 ee22d8c0 c0e34e34 ee004670 [ 24.789300] de00: ee010800 c0e0df00 c0e0de34 c0e0de18 c007221c c0071f80 ee22f000 ee22f060 [ 24.797446] de20: 00000017 c0e34e34 c0e0de4c c0e0de38 c007520c c00721dc 00000049 ee0283c0 [ 24.805591] de40: c0e0de64 c0e0de50 c0071540 c0075144 0000001c ee0283c0 c0e0de8c c0e0de68 [ 24.813737] de60: c02fe7e8 c0071510 00000017 00000000 00000017 00000000 00000001 ee010800 [ 24.821882] de80: c0e0dea4 c0e0de90 c0071540 c02fe750 c0e08a1c 00000000 c0e0ded4 c0e0dea8 [ 24.830028] dea0: c0071880 c0071510 c0e0df00 f000200c 00000017 c0e140a8 c0e0df00 f0002000 [ 24.838173] dec0: c0e96374 c0936d0c c0e0defc c0e0ded8 c0008734 c0071800 c0010d88 60070013 [ 24.846319] dee0: ffffffff c0e0df34 00000001 c0e96374 c0e0df54 c0e0df00 c0014780 c0008700 [ 24.854464] df00: 00000001 00000000 00000000 c0020720 c0e0c000 c0e13530 00000000 00000000 [ 24.862610] df20: 00000001 c0e96374 c0936d0c c0e0df54 c0e0df58 c0e0df48 c0010d84 c0010d88 [ 24.870755] df40: 60070013 ffffffff c0e0df94 c0e0df58 c00626d8 c0010d4c 00000001 c0eb1f00 [ 24.878901] df60: c0e95ab0 c0e0df70 c0e1353c c0e0a580 00000002 c0e13e84 c0e09b88 c0e0df58 [ 24.887046] df80: c092e1b8 ffffffff c0e0dfac c0e0df98 c0928880 c00622fc c0e13e10 c0eb1f00 [ 24.895192] dfa0: c0e0dff4 c0e0dfb0 c0d57d2c c09287f8 ffffffff ffffffff c0d576ec 00000000 [ 24.903337] dfc0: 00000000 c0dc1420 00000000 c0eb22d4 c0e134c0 c0dc141c c0e1c20c 4000406a [ 24.911483] dfe0: 410fc073 00000000 00000000 c0e0dff8 40008074 c0d57968 00000000 00000000 [ 24.919641] [<c036e530>] (exynos_sysmmu_irq) from [<c0071fd8>] (handle_irq_event_percpu+0x64/0x25c) [ 24.928644] [<c0071fd8>] (handle_irq_event_percpu) from [<c007221c>] (handle_irq_event+0x4c/0x6c) [ 24.937483] [<c007221c>] (handle_irq_event) from [<c007520c>] (handle_level_irq+0xd4/0x14c) [ 24.945802] [<c007520c>] (handle_level_irq) from [<c0071540>] (generic_handle_irq+0x3c/0x4c) [ 24.954209] [<c0071540>] (generic_handle_irq) from [<c02fe7e8>] (combiner_handle_cascade_irq+0xa4/0x110) [ 24.963653] [<c02fe7e8>] (combiner_handle_cascade_irq) from [<c0071540>] (generic_handle_irq+0x3c/0x4c) [ 24.973009] [<c0071540>] (generic_handle_irq) from [<c0071880>] (__handle_domain_irq+0x8c/0xfc) [ 24.981676] [<c0071880>] (__handle_domain_irq) from [<c0008734>] (gic_handle_irq+0x40/0x78) [ 24.989994] [<c0008734>] (gic_handle_irq) from [<c0014780>] (__irq_svc+0x40/0x74) [ 24.997440] Exception stack(0xc0e0df00 to 0xc0e0df48) [ 25.002469] df00: 00000001 00000000 00000000 c0020720 c0e0c000 c0e13530 00000000 00000000 [ 25.010616] df20: 00000001 c0e96374 c0936d0c c0e0df54 c0e0df58 c0e0df48 c0010d84 c0010d88 [ 25.018757] df40: 60070013 ffffffff [ 25.022234] [<c0014780>] (__irq_svc) from [<c0010d88>] (arch_cpu_idle+0x48/0x4c) [ 25.029595] [<c0010d88>] (arch_cpu_idle) from [<c00626d8>] (cpu_startup_entry+0x3e8/0x4bc) [ 25.037837] [<c00626d8>] (cpu_startup_entry) from [<c0928880>] (rest_init+0x94/0x98) [ 25.045544] [<c0928880>] (rest_init) from [<c0d57d2c>] (start_kernel+0x3d0/0x3dc) [ 25.052992] Code: e34c30e9 e5932004 e3520000 ca000018 (e7f001f2) [ 25.059058] ---[ end trace 91806a51727d6586 ]--- Change-Id: Ic134f206721e33335962d7e941741331ec72672b Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>

…metimes lkl: Hijack eventfd only when COFNIG_EVENTFD

Rebase 4.14.16 patches onto 4.14.17

vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ torvalds#136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Code: ff 31 ff 4c 89 e6 42 c6 04 33 f8 e8 92 dd d0 ff 4d 85 e4 0f 85 4a eb ff ff e8 54 dc d0 ff 48 8b bd 10 fc ff ff e8 82 95 fe ff <0f> 0b e8 41 dc d0 ff 0f 0b 4c 89 ad 18 fc ff ff c7 85 7c fb ff ff RSP: 0018:ffff8801b0587330 EFLAGS: 00010286 RAX: 000000000000013c RBX: 1ffff100360b0e9c RCX: ffffc90002620000 RDX: 0000000000000000 RSI: ffffffff81631851 RDI: 0000000000000001 RBP: ffff8801b05877c8 R08: ffff880199d40300 R09: ffffed003b5c4fc0 R10: ffffed003b5c4fc0 R11: ffff8801dae27e07 R12: 0000000000000000 R13: ffff88019c1e13c0 R14: dffffc0000000000 R15: 0000000020e01000 FS: 00007fca32251700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f04c540d000 CR3: 00000001ac1f0000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com>

vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ torvalds#136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Code: ff 31 ff 4c 89 e6 42 c6 04 33 f8 e8 92 dd d0 ff 4d 85 e4 0f 85 4a eb ff ff e8 54 dc d0 ff 48 8b bd 10 fc ff ff e8 82 95 fe ff <0f> 0b e8 41 dc d0 ff 0f 0b 4c 89 ad 18 fc ff ff c7 85 7c fb ff ff RSP: 0018:ffff8801b0587330 EFLAGS: 00010286 RAX: 000000000000013c RBX: 1ffff100360b0e9c RCX: ffffc90002620000 RDX: 0000000000000000 RSI: ffffffff81631851 RDI: 0000000000000001 RBP: ffff8801b05877c8 R08: ffff880199d40300 R09: ffffed003b5c4fc0 R10: ffffed003b5c4fc0 R11: ffff8801dae27e07 R12: 0000000000000000 R13: ffff88019c1e13c0 R14: dffffc0000000000 R15: 0000000020e01000 FS: 00007fca32251700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f04c540d000 CR3: 00000001ac1f0000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180710134821.84709-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ torvalds#136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Code: ff 31 ff 4c 89 e6 42 c6 04 33 f8 e8 92 dd d0 ff 4d 85 e4 0f 85 4a eb ff ff e8 54 dc d0 ff 48 8b bd 10 fc ff ff e8 82 95 fe ff <0f> 0b e8 41 dc d0 ff 0f 0b 4c 89 ad 18 fc ff ff c7 85 7c fb ff ff RSP: 0018:ffff8801b0587330 EFLAGS: 00010286 RAX: 000000000000013c RBX: 1ffff100360b0e9c RCX: ffffc90002620000 RDX: 0000000000000000 RSI: ffffffff81631851 RDI: 0000000000000001 RBP: ffff8801b05877c8 R08: ffff880199d40300 R09: ffffed003b5c4fc0 R10: ffffed003b5c4fc0 R11: ffff8801dae27e07 R12: 0000000000000000 R13: ffff88019c1e13c0 R14: dffffc0000000000 R15: 0000000020e01000 FS: 00007fca32251700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f04c540d000 CR3: 00000001ac1f0000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com>

vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ torvalds#136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Code: ff 31 ff 4c 89 e6 42 c6 04 33 f8 e8 92 dd d0 ff 4d 85 e4 0f 85 4a eb ff ff e8 54 dc d0 ff 48 8b bd 10 fc ff ff e8 82 95 fe ff <0f> 0b e8 41 dc d0 ff 0f 0b 4c 89 ad 18 fc ff ff c7 85 7c fb ff ff RSP: 0018:ffff8801b0587330 EFLAGS: 00010286 RAX: 000000000000013c RBX: 1ffff100360b0e9c RCX: ffffc90002620000 RDX: 0000000000000000 RSI: ffffffff81631851 RDI: 0000000000000001 RBP: ffff8801b05877c8 R08: ffff880199d40300 R09: ffffed003b5c4fc0 R10: ffffed003b5c4fc0 R11: ffff8801dae27e07 R12: 0000000000000000 R13: ffff88019c1e13c0 R14: dffffc0000000000 R15: 0000000020e01000 FS: 00007fca32251700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f04c540d000 CR3: 00000001ac1f0000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180710134821.84709-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ #136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ torvalds#136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Code: ff 31 ff 4c 89 e6 42 c6 04 33 f8 e8 92 dd d0 ff 4d 85 e4 0f 85 4a eb ff ff e8 54 dc d0 ff 48 8b bd 10 fc ff ff e8 82 95 fe ff <0f> 0b e8 41 dc d0 ff 0f 0b 4c 89 ad 18 fc ff ff c7 85 7c fb ff ff RSP: 0018:ffff8801b0587330 EFLAGS: 00010286 RAX: 000000000000013c RBX: 1ffff100360b0e9c RCX: ffffc90002620000 RDX: 0000000000000000 RSI: ffffffff81631851 RDI: 0000000000000001 RBP: ffff8801b05877c8 R08: ffff880199d40300 R09: ffffed003b5c4fc0 R10: ffffed003b5c4fc0 R11: ffff8801dae27e07 R12: 0000000000000000 R13: ffff88019c1e13c0 R14: dffffc0000000000 R15: 0000000020e01000 FS: 00007fca32251700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f04c540d000 CR3: 00000001ac1f0000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd torvalds#136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd torvalds#136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd torvalds#136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>

[ Upstream commit 6a3b45a ] MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd torvalds#136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

BugLink: https://bugs.launchpad.net/bugs/1830906 [ Upstream commit 6a3b45a ] MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>

Add minimal runtime PM support (enable on probe, disable on remove), to ensure proper operation with a parent device that uses runtime PM. This is needed on systems where the FLASH is connected to a bus controller that is contained in a PM domain and/or has a gateable functional clock. In such cases, before accessing any device connected to the external bus, the PM domain must be powered up, and/or the functional clock must be enabled, which is typically handled through runtime PM by the bus controller driver. An example of this is the Renesas APE6-EVM development board, which has an Ethernet controller and a CFI FLASH connected to the Bus State Controller (BSC) of an R-Mobile APE6 SoC. As long as the Ethernet driver, which had Runtime PM support since commit 3a611e2 ("net/smsc911x: Add minimal runtime PM support"), keeps the BSC powered, accessing the FLASH works. When the ethernet node in r8a73a4-ape6evm.dts is disabled, the BSC is never powered up, and the kernel crashes when trying to access the FLASH: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=7fef2835 Internal error: : 1406 [#1] SMP ARM CPU: 0 PID: 122 Comm: hd Tainted: G W 5.5.0-rc1-ape6evm-00814-g38ca966db25b9dbd-dirty torvalds#136 Hardware name: Generic R8A73A4 (Flattened Device Tree) PC is at chip_ready+0x12c/0x380 LR is at chip_ready+0x10c/0x380 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add minimal runtime PM support (enable on probe, disable on remove), to ensure proper operation with a parent device that uses runtime PM. This is needed on systems where the FLASH is connected to a bus controller that is contained in a PM domain and/or has a gateable functional clock. In such cases, before accessing any device connected to the external bus, the PM domain must be powered up, and/or the functional clock must be enabled, which is typically handled through runtime PM by the bus controller driver. An example of this is the Renesas APE6-EVM development board, which has an Ethernet controller and a CFI FLASH connected to the Bus State Controller (BSC) of an R-Mobile APE6 SoC. As long as the Ethernet driver, which had Runtime PM support since commit 3a611e2 ("net/smsc911x: Add minimal runtime PM support"), keeps the BSC powered, accessing the FLASH works. When the ethernet node in r8a73a4-ape6evm.dts is disabled, the BSC is never powered up, and the kernel crashes when trying to access the FLASH: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=7fef2835 Internal error: : 1406 [#1] SMP ARM CPU: 0 PID: 122 Comm: hd Tainted: G W 5.5.0-rc1-ape6evm-00814-g38ca966db25b9dbd-dirty torvalds#136 Hardware name: Generic R8A73A4 (Flattened Device Tree) PC is at chip_ready+0x12c/0x380 LR is at chip_ready+0x10c/0x380 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

When a process is oom killed as a result of memcg limits and the victim is waiting to exit, nothing ends up actually yielding the processor back to the victim on UP systems with preemption disabled. Instead, the charging process simply loops in memcg reclaim and eventually soft lockups. Memory cgroup out of memory: Killed process 808 (repro) total-vm:41944kB, anon-rss:35344kB, file-rss:504kB, shmem-rss:0kB, UID:0 pgtables:108kB oom_score_adj:0 watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [repro:806] CPU: 0 PID: 806 Comm: repro Not tainted 5.6.0-rc5+ torvalds#136 RIP: 0010:shrink_lruvec+0x4e9/0xa40 ... Call Trace: shrink_node+0x40d/0x7d0 do_try_to_free_pages+0x13f/0x470 try_to_free_mem_cgroup_pages+0x16d/0x230 try_charge+0x247/0xac0 mem_cgroup_try_charge+0x10a/0x220 mem_cgroup_try_charge_delay+0x1e/0x40 handle_mm_fault+0xdf2/0x15f0 do_user_addr_fault+0x21f/0x420 page_fault+0x2f/0x40 Make sure that something ends up actually yielding the processor back to the victim to allow for memory freeing. Most appropriate place appears to be shrink_node_memcgs() where the iteration of all decendant memcgs could be particularly lengthy. Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: David Rientjes <rientjes@google.com>

When run fsstress with disk offline/online, I got follow warning: [ 47.395783] ------------[ cut here ]------------ [ 47.400554] sd 1:0:0:0: rejecting I/O to offline device [ 47.403327] WARNING: CPU: 3 PID: 2420 at fs/buffer.c:1117 mark_buffer_dirty+0xcd/0xe0 [ 47.406093] Modules linked in: [ 47.407322] CPU: 3 PID: 2420 Comm: fsstress Not tainted 3.10.0-862.14.0.6.x86_64 torvalds#136 [ 47.409702] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS ? -20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc3104/01/2014 [ 47.413142] Call Trace: [ 47.413473] sd 1:0:0:0: rejecting I/O to offline device [ 47.414805] [<ffffffffa604697f>] dump_stack+0x19/0x1b [ 47.415866] [<ffffffffa5895988>] __warn+0xd8/0x100 [ 47.416970] [<ffffffffa5895acd>] warn_slowpath_null+0x1d/0x20 [ 47.418115] [<ffffffffa5a5aecd>] mark_buffer_dirty+0xcd/0xe0 [ 47.419247] [<ffffffffa5af6a78>] __ext4_handle_dirty_metadata+0x1a8/0x220 [ 47.420408] [<ffffffffa5af65d3>] ? __ext4_journal_get_write_access+0x53/0x110 [ 47.421430] [<ffffffffa5abeec1>] __ext4_new_inode+0x921/0x1350 [ 47.422276] [<ffffffffa5ad22b9>] ext4_create+0xd9/0x1a0 [ 47.423071] [<ffffffffa5a31763>] vfs_create+0xd3/0x140 [ 47.423820] [<ffffffffa5a33870>] do_last+0x10f0/0x12c0 [ 47.424627] [<ffffffffa5bdc4fc>] ? selinux_file_alloc_security+0x3c/0x60 [ 47.425571] [<ffffffffa5a35877>] path_openat+0xd7/0x640 [ 47.426389] [<ffffffffa605885b>] ? system_call_fastpath+0x22/0x27 [ 47.428099] [<ffffffffa5a1c444>] ? create_object+0x234/0x310 [ 47.428922] [<ffffffffa5a3727d>] do_filp_open+0x4d/0xb0 [ 47.429724] [<ffffffffa5a90b69>] ? files_cgroup_alloc_fd+0x39/0x60 [ 47.430623] [<ffffffffa5a44c35>] ? __alloc_fd+0xe5/0x180 [ 47.431361] [<ffffffffa5a234a7>] do_sys_open+0x137/0x240 [ 47.432275] [<ffffffffa6058795>] ? system_call_after_swapgs+0xa2/0x146 [ 47.433214] [<ffffffffa5a235ce>] SyS_open+0x1e/0x20 [ 47.433959] [<ffffffffa5a23606>] SyS_creat+0x16/0x20 [ 47.434675] [<ffffffffa605885b>] system_call_fastpath+0x22/0x27 [ 47.435555] [<ffffffffa60587a1>] ? system_call_after_swapgs+0xae/0x146 [ 47.436468] ---[ end trace f8ed64a9adfa868b ]--- In fact, I got a lot of call trace. All call trace trigger warning when call __ext4_handle_dirty_metadate. If there are racing calls to __ext4_handle_dirty_metadate. It's possible for another writeback result in the buffer being marked with an error after we check if the buffer is marked as having a write error and the buffer up-to-date flag is cleared. If that happens mark_buffer_dirty() can end up throwing a WARN_ON_ONCE. To Fix this warning, lock buffer when call mark_buffer_dirty in function __ext4_handle_dirty_metadate. Signed-off-by: Ye Bin <yebin10@huawei.com>

WARNING: Unknown commit id '70e806e4e645', maybe rebased or not pulled? #4: Since commit 70e806e ("mm: Do early cow for pinned pages during WARNING: Unknown commit id 'f3c64eda3e50', maybe rebased or not pulled? torvalds#34: problems (and was missing a barrrier), see commit f3c64ed ("mm: avoid WARNING: Unknown commit id 'f3c64eda3e50', maybe rebased or not pulled? torvalds#46: Fixes: f3c64ed ("mm: avoid early COW write protect games during fork()") WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#136: FILE: mm/gup.c:2687: + unsigned seq; WARNING: Block comments should align the * on each line torvalds#191: FILE: mm/memory.c:1180: + * lockdep complaining about preemptibility. + */ total: 0 errors, 5 warnings, 109 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-prevent-gup_fast-from-racing-with-cow-during-fork.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

PD#150078: driver defect clean up: torvalds#14 torvalds#89 torvalds#111 torvalds#124 torvalds#133 torvalds#136 torvalds#137 torvalds#146 torvalds#148 torvalds#150 torvalds#153 Change-Id: I734a66a8b92a0dc57a232879463a3fc074534fa0 Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

xfs log io error will trigger xlog shut down, and end_io worker call xlog_state_shutdown_callbacks to unpin and release the buf log item. The race condition is that when there are some thread doing transaction commit and happened not to be intercepted by xlog_is_shutdown, then, these log item will be insert into CIL, when unpin and release these buf log item, UAF will occur. BTW, add delay before `xlog_cil_commit` can increase recurrence probability. The following call graph actually encountered this bad situation. fsstress io end worker kworker/0:1H-216 xlog_ioend_work ->xlog_force_shutdown ->xlog_state_shutdown_callbacks ->xlog_cil_process_committed ->xlog_cil_committed ->xfs_trans_committed_bulk ->xfs_trans_apply_sb_deltas ->li_ops->iop_unpin(lip, 1); ->xfs_trans_getsb ->_xfs_trans_bjoin ->xfs_buf_item_init ->if (bip) { return 0;} //relog ->xlog_cil_commit ->xlog_cil_insert_items //insert into CIL ->xfs_buf_ioend_fail(bp); ->xfs_buf_ioend ->xfs_buf_item_done ->xfs_buf_item_relse ->xfs_buf_item_free when cil push worker gather percpu cil and insert super block buf log item into ctx->log_items then uaf occurs. ================================================================== BUG: KASAN: use-after-free in xlog_cil_push_work+0x1c8f/0x22f0 Write of size 8 at addr ffff88801800f3f0 by task kworker/u4:4/105 CPU: 0 PID: 105 Comm: kworker/u4:4 Tainted: G W 6.1.0-rc1-00001-g274115149b42 torvalds#136 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: xfs-cil/sda xlog_cil_push_work Call Trace: <TASK> dump_stack_lvl+0x4d/0x66 print_report+0x171/0x4a6 kasan_report+0xb3/0x130 xlog_cil_push_work+0x1c8f/0x22f0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 2145: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x14a/0x510 xfs_buf_item_init+0x160/0x6d0 _xfs_trans_bjoin+0x7f/0x2e0 xfs_trans_getsb+0xb6/0x3f0 xfs_trans_apply_sb_deltas+0x1f/0x8c0 __xfs_trans_commit+0xa25/0xe10 xfs_symlink+0xe23/0x1660 xfs_vn_symlink+0x157/0x280 vfs_symlink+0x491/0x790 do_symlinkat+0x128/0x220 __x64_sys_symlink+0x7a/0x90 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 216: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 __kasan_slab_free+0x105/0x1a0 kmem_cache_free+0xb6/0x460 xfs_buf_ioend+0x1e9/0x11f0 xfs_buf_item_unpin+0x3d6/0x840 xfs_trans_committed_bulk+0x4c2/0x7c0 xlog_cil_committed+0xab6/0xfb0 xlog_cil_process_committed+0x117/0x1e0 xlog_state_shutdown_callbacks+0x208/0x440 xlog_force_shutdown+0x1b3/0x3a0 xlog_ioend_work+0xef/0x1d0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88801800f388 which belongs to the cache xfs_buf_item of size 272 The buggy address is located 104 bytes inside of 272-byte region [ffff88801800f388, ffff88801800f498) The buggy address belongs to the physical page: page:ffffea0000600380 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88801800f208 pfn:0x1800e head:ffffea0000600380 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffffea0000699788 ffff88801319db50 ffff88800fb50640 raw: ffff88801800f208 000000000015000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801800f280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f300: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88801800f380: fc fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801800f400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f480: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint Signed-off-by: Guo Xuenan <guoxuenan@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>

LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 torvalds#129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 torvalds#132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 torvalds#133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 torvalds#134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi>

LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 torvalds#129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 torvalds#132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 torvalds#133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 torvalds#134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 torvalds#129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 torvalds#132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 torvalds#133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 torvalds#134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi>

LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 torvalds#129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 torvalds#132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 torvalds#133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 torvalds#134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Inject fault while probing kunit-example-test.ko, if kstrdup() fails in mod_sysfs_setup() in load_module(), the mod->state will switch from MODULE_STATE_COMING to MODULE_STATE_GOING instead of from MODULE_STATE_LIVE to MODULE_STATE_GOING, so only kunit_module_exit() will be called without kunit_module_init(), and the mod->kunit_suites is no set correctly and the free in kunit_free_suite_set() will cause below wild-memory-access bug. The mod->state state machine when load_module() succeeds: MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_LIVE ^ | | | delete_module +---------------- MODULE_STATE_GOING <---------+ The mod->state state machine when load_module() fails at mod_sysfs_setup(): MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_GOING ^ | | | +-----------------------------------------------+ Call kunit_module_init() at MODULE_STATE_COMING state to fix the issue because MODULE_STATE_LIVE is transformed from it. Unable to handle kernel paging request at virtual address ffffff341e942a88 KASAN: maybe wild-memory-access in range [0x0003f9a0f4a15440-0x0003f9a0f4a15447] Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000441ea000 [ffffff341e942a88] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: kunit_example_test(-) cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test] CPU: 3 PID: 2035 Comm: modprobe Tainted: G W N 6.5.0-next-20230828+ torvalds#136 Hardware name: linux,dummy-virt (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kfree+0x2c/0x70 lr : kunit_free_suite_set+0xcc/0x13c sp : ffff8000829b75b0 x29: ffff8000829b75b0 x28: ffff8000829b7b90 x27: 0000000000000000 x26: dfff800000000000 x25: ffffcd07c82a7280 x24: ffffcd07a50ab300 x23: ffffcd07a50ab2e8 x22: 1ffff00010536ec0 x21: dfff800000000000 x20: ffffcd07a50ab2f0 x19: ffffcd07a50ab2f0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffcd07c24b6764 x14: ffffcd07c24b63c0 x13: ffffcd07c4cebb94 x12: ffff700010536ec7 x11: 1ffff00010536ec6 x10: ffff700010536ec6 x9 : dfff800000000000 x8 : 00008fffefac913a x7 : 0000000041b58ab3 x6 : 0000000000000000 x5 : 1ffff00010536ec5 x4 : ffff8000829b7628 x3 : dfff800000000000 x2 : ffffff341e942a80 x1 : ffffcd07a50aa000 x0 : fffffc0000000000 Call trace: kfree+0x2c/0x70 kunit_free_suite_set+0xcc/0x13c kunit_module_notify+0xd8/0x360 blocking_notifier_call_chain+0xc4/0x128 load_module+0x382c/0x44a4 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2c8/0x524 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x38/0x78 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: aa0003e1 b25657e0 d34cfc42 8b021802 (f9400440) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x4d0742200000 from 0xffff800080000000 PHYS_OFFSET: 0xffffee43c0000000 CPU features: 0x88000203,3c020000,1000421b Memory Limit: none Rebooting in 1 seconds.. Fixes: 3d6e446 ("kunit: unify module and builtin suite definitions") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>

Inject fault while probing kunit-example-test.ko, if kstrdup() fails in mod_sysfs_setup() in load_module(), the mod->state will switch from MODULE_STATE_COMING to MODULE_STATE_GOING instead of from MODULE_STATE_LIVE to MODULE_STATE_GOING, so only kunit_module_exit() will be called without kunit_module_init(), and the mod->kunit_suites is no set correctly and the free in kunit_free_suite_set() will cause below wild-memory-access bug. The mod->state state machine when load_module() succeeds: MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_LIVE ^ | | | delete_module +---------------- MODULE_STATE_GOING <---------+ The mod->state state machine when load_module() fails at mod_sysfs_setup(): MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_GOING ^ | | | +-----------------------------------------------+ Call kunit_module_init() at MODULE_STATE_COMING state to fix the issue because MODULE_STATE_LIVE is transformed from it. Unable to handle kernel paging request at virtual address ffffff341e942a88 KASAN: maybe wild-memory-access in range [0x0003f9a0f4a15440-0x0003f9a0f4a15447] Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000441ea000 [ffffff341e942a88] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: kunit_example_test(-) cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test] CPU: 3 PID: 2035 Comm: modprobe Tainted: G W N 6.5.0-next-20230828+ torvalds#136 Hardware name: linux,dummy-virt (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kfree+0x2c/0x70 lr : kunit_free_suite_set+0xcc/0x13c sp : ffff8000829b75b0 x29: ffff8000829b75b0 x28: ffff8000829b7b90 x27: 0000000000000000 x26: dfff800000000000 x25: ffffcd07c82a7280 x24: ffffcd07a50ab300 x23: ffffcd07a50ab2e8 x22: 1ffff00010536ec0 x21: dfff800000000000 x20: ffffcd07a50ab2f0 x19: ffffcd07a50ab2f0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffcd07c24b6764 x14: ffffcd07c24b63c0 x13: ffffcd07c4cebb94 x12: ffff700010536ec7 x11: 1ffff00010536ec6 x10: ffff700010536ec6 x9 : dfff800000000000 x8 : 00008fffefac913a x7 : 0000000041b58ab3 x6 : 0000000000000000 x5 : 1ffff00010536ec5 x4 : ffff8000829b7628 x3 : dfff800000000000 x2 : ffffff341e942a80 x1 : ffffcd07a50aa000 x0 : fffffc0000000000 Call trace: kfree+0x2c/0x70 kunit_free_suite_set+0xcc/0x13c kunit_module_notify+0xd8/0x360 blocking_notifier_call_chain+0xc4/0x128 load_module+0x382c/0x44a4 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2c8/0x524 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x38/0x78 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: aa0003e1 b25657e0 d34cfc42 8b021802 (f9400440) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x4d0742200000 from 0xffff800080000000 PHYS_OFFSET: 0xffffee43c0000000 CPU features: 0x88000203,3c020000,1000421b Memory Limit: none Rebooting in 1 seconds.. Fixes: 3d6e446 ("kunit: unify module and builtin suite definitions") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com>

Inject fault while probing kunit-example-test.ko, if kstrdup() fails in mod_sysfs_setup() in load_module(), the mod->state will switch from MODULE_STATE_COMING to MODULE_STATE_GOING instead of from MODULE_STATE_LIVE to MODULE_STATE_GOING, so only kunit_module_exit() will be called without kunit_module_init(), and the mod->kunit_suites is no set correctly and the free in kunit_free_suite_set() will cause below wild-memory-access bug. The mod->state state machine when load_module() succeeds: MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_LIVE ^ | | | delete_module +---------------- MODULE_STATE_GOING <---------+ The mod->state state machine when load_module() fails at mod_sysfs_setup(): MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_GOING ^ | | | +-----------------------------------------------+ Call kunit_module_init() at MODULE_STATE_COMING state to fix the issue because MODULE_STATE_LIVE is transformed from it. Unable to handle kernel paging request at virtual address ffffff341e942a88 KASAN: maybe wild-memory-access in range [0x0003f9a0f4a15440-0x0003f9a0f4a15447] Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000441ea000 [ffffff341e942a88] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: kunit_example_test(-) cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test] CPU: 3 PID: 2035 Comm: modprobe Tainted: G W N 6.5.0-next-20230828+ torvalds#136 Hardware name: linux,dummy-virt (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kfree+0x2c/0x70 lr : kunit_free_suite_set+0xcc/0x13c sp : ffff8000829b75b0 x29: ffff8000829b75b0 x28: ffff8000829b7b90 x27: 0000000000000000 x26: dfff800000000000 x25: ffffcd07c82a7280 x24: ffffcd07a50ab300 x23: ffffcd07a50ab2e8 x22: 1ffff00010536ec0 x21: dfff800000000000 x20: ffffcd07a50ab2f0 x19: ffffcd07a50ab2f0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffcd07c24b6764 x14: ffffcd07c24b63c0 x13: ffffcd07c4cebb94 x12: ffff700010536ec7 x11: 1ffff00010536ec6 x10: ffff700010536ec6 x9 : dfff800000000000 x8 : 00008fffefac913a x7 : 0000000041b58ab3 x6 : 0000000000000000 x5 : 1ffff00010536ec5 x4 : ffff8000829b7628 x3 : dfff800000000000 x2 : ffffff341e942a80 x1 : ffffcd07a50aa000 x0 : fffffc0000000000 Call trace: kfree+0x2c/0x70 kunit_free_suite_set+0xcc/0x13c kunit_module_notify+0xd8/0x360 blocking_notifier_call_chain+0xc4/0x128 load_module+0x382c/0x44a4 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2c8/0x524 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x38/0x78 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: aa0003e1 b25657e0 d34cfc42 8b021802 (f9400440) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x4d0742200000 from 0xffff800080000000 PHYS_OFFSET: 0xffffee43c0000000 CPU features: 0x88000203,3c020000,1000421b Memory Limit: none Rebooting in 1 seconds.. Fixes: 3d6e446 ("kunit: unify module and builtin suite definitions") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

[ Upstream commit 7f74563 ] LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 torvalds#129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 torvalds#132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 torvalds#133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 torvalds#134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2810c1e ] Inject fault while probing kunit-example-test.ko, if kstrdup() fails in mod_sysfs_setup() in load_module(), the mod->state will switch from MODULE_STATE_COMING to MODULE_STATE_GOING instead of from MODULE_STATE_LIVE to MODULE_STATE_GOING, so only kunit_module_exit() will be called without kunit_module_init(), and the mod->kunit_suites is no set correctly and the free in kunit_free_suite_set() will cause below wild-memory-access bug. The mod->state state machine when load_module() succeeds: MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_LIVE ^ | | | delete_module +---------------- MODULE_STATE_GOING <---------+ The mod->state state machine when load_module() fails at mod_sysfs_setup(): MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_GOING ^ | | | +-----------------------------------------------+ Call kunit_module_init() at MODULE_STATE_COMING state to fix the issue because MODULE_STATE_LIVE is transformed from it. Unable to handle kernel paging request at virtual address ffffff341e942a88 KASAN: maybe wild-memory-access in range [0x0003f9a0f4a15440-0x0003f9a0f4a15447] Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000441ea000 [ffffff341e942a88] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: kunit_example_test(-) cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test] CPU: 3 PID: 2035 Comm: modprobe Tainted: G W N 6.5.0-next-20230828+ torvalds#136 Hardware name: linux,dummy-virt (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kfree+0x2c/0x70 lr : kunit_free_suite_set+0xcc/0x13c sp : ffff8000829b75b0 x29: ffff8000829b75b0 x28: ffff8000829b7b90 x27: 0000000000000000 x26: dfff800000000000 x25: ffffcd07c82a7280 x24: ffffcd07a50ab300 x23: ffffcd07a50ab2e8 x22: 1ffff00010536ec0 x21: dfff800000000000 x20: ffffcd07a50ab2f0 x19: ffffcd07a50ab2f0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffcd07c24b6764 x14: ffffcd07c24b63c0 x13: ffffcd07c4cebb94 x12: ffff700010536ec7 x11: 1ffff00010536ec6 x10: ffff700010536ec6 x9 : dfff800000000000 x8 : 00008fffefac913a x7 : 0000000041b58ab3 x6 : 0000000000000000 x5 : 1ffff00010536ec5 x4 : ffff8000829b7628 x3 : dfff800000000000 x2 : ffffff341e942a80 x1 : ffffcd07a50aa000 x0 : fffffc0000000000 Call trace: kfree+0x2c/0x70 kunit_free_suite_set+0xcc/0x13c kunit_module_notify+0xd8/0x360 blocking_notifier_call_chain+0xc4/0x128 load_module+0x382c/0x44a4 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2c8/0x524 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x38/0x78 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: aa0003e1 b25657e0 d34cfc42 8b021802 (f9400440) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x4d0742200000 from 0xffff800080000000 PHYS_OFFSET: 0xffffee43c0000000 CPU features: 0x88000203,3c020000,1000421b Memory Limit: none Rebooting in 1 seconds.. Fixes: 3d6e446 ("kunit: unify module and builtin suite definitions") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

BugLink: https://bugs.launchpad.net/bugs/2035588 [ Upstream commit 7f74563 ] LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 torvalds#129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 torvalds#132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 torvalds#133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 torvalds#134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 torvalds#135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 torvalds#136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>

[ Upstream commit 575689f ] xfs log io error will trigger xlog shut down, and end_io worker call xlog_state_shutdown_callbacks to unpin and release the buf log item. The race condition is that when there are some thread doing transaction commit and happened not to be intercepted by xlog_is_shutdown, then, these log item will be insert into CIL, when unpin and release these buf log item, UAF will occur. BTW, add delay before `xlog_cil_commit` can increase recurrence probability. The following call graph actually encountered this bad situation. fsstress io end worker kworker/0:1H-216 xlog_ioend_work ->xlog_force_shutdown ->xlog_state_shutdown_callbacks ->xlog_cil_process_committed ->xlog_cil_committed ->xfs_trans_committed_bulk ->xfs_trans_apply_sb_deltas ->li_ops->iop_unpin(lip, 1); ->xfs_trans_getsb ->_xfs_trans_bjoin ->xfs_buf_item_init ->if (bip) { return 0;} //relog ->xlog_cil_commit ->xlog_cil_insert_items //insert into CIL ->xfs_buf_ioend_fail(bp); ->xfs_buf_ioend ->xfs_buf_item_done ->xfs_buf_item_relse ->xfs_buf_item_free when cil push worker gather percpu cil and insert super block buf log item into ctx->log_items then uaf occurs. ================================================================== BUG: KASAN: use-after-free in xlog_cil_push_work+0x1c8f/0x22f0 Write of size 8 at addr ffff88801800f3f0 by task kworker/u4:4/105 CPU: 0 PID: 105 Comm: kworker/u4:4 Tainted: G W 6.1.0-rc1-00001-g274115149b42 torvalds#136 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: xfs-cil/sda xlog_cil_push_work Call Trace: <TASK> dump_stack_lvl+0x4d/0x66 print_report+0x171/0x4a6 kasan_report+0xb3/0x130 xlog_cil_push_work+0x1c8f/0x22f0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 2145: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x14a/0x510 xfs_buf_item_init+0x160/0x6d0 _xfs_trans_bjoin+0x7f/0x2e0 xfs_trans_getsb+0xb6/0x3f0 xfs_trans_apply_sb_deltas+0x1f/0x8c0 __xfs_trans_commit+0xa25/0xe10 xfs_symlink+0xe23/0x1660 xfs_vn_symlink+0x157/0x280 vfs_symlink+0x491/0x790 do_symlinkat+0x128/0x220 __x64_sys_symlink+0x7a/0x90 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 216: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 __kasan_slab_free+0x105/0x1a0 kmem_cache_free+0xb6/0x460 xfs_buf_ioend+0x1e9/0x11f0 xfs_buf_item_unpin+0x3d6/0x840 xfs_trans_committed_bulk+0x4c2/0x7c0 xlog_cil_committed+0xab6/0xfb0 xlog_cil_process_committed+0x117/0x1e0 xlog_state_shutdown_callbacks+0x208/0x440 xlog_force_shutdown+0x1b3/0x3a0 xlog_ioend_work+0xef/0x1d0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88801800f388 which belongs to the cache xfs_buf_item of size 272 The buggy address is located 104 bytes inside of 272-byte region [ffff88801800f388, ffff88801800f498) The buggy address belongs to the physical page: page:ffffea0000600380 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88801800f208 pfn:0x1800e head:ffffea0000600380 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffffea0000699788 ffff88801319db50 ffff88800fb50640 raw: ffff88801800f208 000000000015000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801800f280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f300: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88801800f380: fc fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801800f400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f480: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint Signed-off-by: Guo Xuenan <guoxuenan@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update xpad.c

60604ff

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#136 from pscollins/hijack-eventfd-only-so…

c4e50c2

…metimes lkl: Hijack eventfd only when COFNIG_EVENTFD

iaguis pushed a commit to kinvolk/linux that referenced this pull request Feb 6, 2018

Merge pull request torvalds#136 from dm0-/v4.14.17-coreos

4113c6a

Rebase 4.14.16 patches onto 4.14.17

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update xpad.c #136

Update xpad.c #136

linbingchen007 commented Nov 15, 2014

eljonny commented Nov 15, 2014

linbingchen007 commented Dec 5, 2014

Elizafox commented Jan 8, 2015

Update xpad.c #136

Are you sure you want to change the base?

Update xpad.c #136

Conversation

linbingchen007 commented Nov 15, 2014

eljonny commented Nov 15, 2014

linbingchen007 commented Dec 5, 2014

Elizafox commented Jan 8, 2015