Structure cleanup #276

bgly · 2016-04-18T15:28:44Z

No description provided.

(Fix possible usb-gadget + tcm-loop make_nexus breakage - Dan Carpenter) Acked-by: Juergen Gross <jgross@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Chris Boot <bootc@bootc.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Cc: Vasu Dev <vasu.dev@linux.intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Cc: Vu Pham <vu@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

(Fix sbp_mgt_get_req() IS_ERR failure checking - Dan Carpenter) Cc: Chris Boot <bootc@bootc.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Cc: Chris Boot <bootc@bootc.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch drops struct usbg_cmd->kref internal kref-erence usage, for proper TARGET_SCF_ACK_KREF conversion. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

(Add wrapper for handling pending_req tag failure - Juergen) (Drop left-over se_cmd memset in scsiback_cmd_exec - Juergen) Acked-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Acked-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Cc: Vasu Dev <vasu.dev@linux.intel.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Cc: Vu Pham <vu@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

#cat /sys/kernel/debug/qla2xxx/qla2xxx_31/tgt_sess qla2xxx_31 Port ID Port Name Handle ff:fc:01 21:fd:00:05:33:c7:ec:16 0 01:0e:00 21:00:00:24:ff:7b:8a:e4 1 01:0f:00 21:00:00:24:ff:7b:8a:e5 2 .... (Drop ->check_initiator_node_acl() parameter usage - nab) Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Once connection request is accepted, one rx descriptor is posted to receive login request. This descriptor has rx type, but is outside the main pool of rx descriptors, and thus was mistreated as tx type. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We need an indication that isert_conn->iscsi_conn binding has happened so we'll know not to invoke a connection reinstatement on an unbound connection which will lead to a bogus isert_conn->conn dereferece. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

No need to restrict this check to specific events. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

When we receive an event that triggers connection termination, we have a a couple of things we may want to do: 1. In case we are already terminating, bailout early 2. In case we are connected but not bound, disconnect and schedule a connection cleanup silently (don't reinstate) 3. In case we are connected and bound, disconnect and reinstate the connection This rework fixes a bug that was detected against a mis-behaved initiator which rejected our rdma_cm accept, in this stage the isert_conn is no bound and reinstate caused a bogus dereference. What's great about this is that we don't need the post_recv_buf_count anymore, so get rid of it. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

With current termination flow we call release_conn after completion. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We can never get to isert_wait_conn in INIT state anymore, so get rid of this condition. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This is the same as ISCSI_DEF_MAX_RECV_SEG_LEN (and must be the same given the structure layouts), so just use that constant instead. This also allows removing ISER_RX_LOGIN_SIZE in favor of ISER_RX_PAYLOAD_SIZE. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

The login receive buffer is used as a iser_rx_desc, so type it as such in struct isert_conn and allocate the exactly right space for it. The TX buffer is moved to a separate variable and properly sized as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Use the workqueue based CQ type similar to what isert was using previously, and properly split up the completion handlers. Note that this also takes special care to handle the magic login WRs separately, and also renames the submission functions so that it's clear that they are only to be used for the login buffers. (Fix up isert_print_wc usage in isert_beacon_done - nab) Signed-off-by: Christoph Hellwig <hch@lst.de> [sagig: added iscsi conn reinstatement in non-flush error completions and added error completion type print] Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

There is exactly one instance per struct isert_cmd, so merge the two to simplify everyones life. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We only use the pointer when processing regular iSER commands, and it then always points to the struct iser_cmd that contains the TX descriptor. Remove it and rely on container_of to save a little space and avoid a pointer that is updated multiple times per processed command. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch has iblock pass the WRITE_SAME command to the device for offloading if possible. It is similar to what is done for UNMAP/discards, except that we export a large max write same value to the initiator, and then rely on the block layer to break it up into multiple requests if it cannot fit into one. v2. - Drop file backend changes and move helper function to iblock backend. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

se_dev_entry.lun_flags and se_lun.lun_access are only used for keeping track of read-write vs. read-only state. Since this is an either/or thing we can represent it as bool, and remove the unneeded enum transport_lunflags_table, which is left over from when there were more flags. Change code that uses this enum to just use true/false, and make it clear through variable and param names that true means read-only, false means read-write. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We don't need use one iovec per scatter-gather list entry, since data area are continuous. Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Sheng Yang <sheng@yasker.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Prepare for data_bitmap in the next patch. Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Sheng Yang <sheng@yasker.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

…a_tail The data_bitmap was introduced to support asynchornization accessing of data area. We divide mailbox data area into blocks, and use data_bitmap to track the usage of data area. All the new command's data would start with a new block, and may left unusable space after it end. But it's easy to track using data_bitmap. Now we can allocate data area for asynchronization accessing from userspace, since we can track the allocation using data_bitmap. The userspace part would be the same as Maxim's previous asynchronized implementation. Signed-off-by: Sheng Yang <sheng@yasker.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Fix checkpatch warnings: WARNING: Use #include <linux/io.h> instead of <asm/io.h> torvalds#38: FILE: drivers/tty/serial/sunzilog.c:38: +#include <asm/io.h> WARNING: line over 80 characters torvalds#109: FILE: drivers/tty/serial/sunzilog.c:109: +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) WARNING: line over 80 characters torvalds#116: FILE: drivers/tty/serial/sunzilog.c:116: +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) WARNING: line over 80 characters torvalds#179: FILE: drivers/tty/serial/sunzilog.c:179: +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) WARNING: Missing a blank line after declarations torvalds#188: FILE: drivers/tty/serial/sunzilog.c:188: + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) ERROR: trailing whitespace torvalds#231: FILE: drivers/tty/serial/sunzilog.c:231: +^I$ WARNING: braces {} are not necessary for any arm of this statement torvalds#276: FILE: drivers/tty/serial/sunzilog.c:276: + if (ZS_TX_ACTIVE(up)) { [...] + } else { [...] ERROR: else should follow close brace '}' torvalds#378: FILE: drivers/tty/serial/sunzilog.c:378: + } + else if (r1 & PAR_ERR) ERROR: code indent should use tabs where possible torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: please, no space before tabs torvalds#397: FILE: drivers/tty/serial/sunzilog.c:397: +^I^I ^Itty_insert_flip_char(port, ch, flag);$ WARNING: line over 80 characters torvalds#440: FILE: drivers/tty/serial/sunzilog.c:440: + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. WARNING: line over 80 characters torvalds#441: FILE: drivers/tty/serial/sunzilog.c:441: + * But it does not tell us which bit has changed, we have to keep WARNING: Missing a blank line after declarations torvalds#464: FILE: drivers/tty/serial/sunzilog.c:464: + unsigned char status = readb(&channel->control); + ZSDELAY(); WARNING: line over 80 characters torvalds#468: FILE: drivers/tty/serial/sunzilog.c:468: + * It can occur because of how we do serial console writes. It would WARNING: line over 80 characters torvalds#469: FILE: drivers/tty/serial/sunzilog.c:469: + * be nice to transmit console writes just like we normally would for WARNING: line over 80 characters torvalds#470: FILE: drivers/tty/serial/sunzilog.c:470: + * a TTY line. (ie. buffered and TX interrupt driven). That is not WARNING: line over 80 characters torvalds#471: FILE: drivers/tty/serial/sunzilog.c:471: + * easy because console writes cannot sleep. One solution might be WARNING: line over 80 characters torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) WARNING: plain inline is preferred over __inline__ torvalds#593: FILE: drivers/tty/serial/sunzilog.c:593: +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) ERROR: trailing whitespace torvalds#664: FILE: drivers/tty/serial/sunzilog.c:664: +^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#752: FILE: drivers/tty/serial/sunzilog.c:752: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ ERROR: trailing whitespace torvalds#779: FILE: drivers/tty/serial/sunzilog.c:779: +^I^I/* NOTE: Not subject to 'transmitter active' rule. */ $ WARNING: line over 80 characters #999: FILE: drivers/tty/serial/sunzilog.c:999: +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) WARNING: Missing a blank line after declarations #1142: FILE: drivers/tty/serial/sunzilog.c:1142: + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... #1230: FILE: drivers/tty/serial/sunzilog.c:1230: + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", WARNING: braces {} are not necessary for single statement blocks #1383: FILE: drivers/tty/serial/sunzilog.c:1383: + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } WARNING: quoted string split across lines #1493: FILE: drivers/tty/serial/sunzilog.c:1493: + dev_info(&op->dev, "Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: quoted string split across lines #1497: FILE: drivers/tty/serial/sunzilog.c:1497: + dev_info(&op->dev, "Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", WARNING: Missing a blank line after declarations #1581: FILE: drivers/tty/serial/sunzilog.c:1581: + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, WARNING: line over 80 characters #1590: FILE: drivers/tty/serial/sunzilog.c:1590: + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ WARNING: line over 80 characters #1627: FILE: drivers/tty/serial/sunzilog.c:1627: + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ ERROR: trailing statements should be on next line #1248: FILE: drivers/tty/serial/sunzilog.c:1248: + case B150: baud = 150; break; ERROR: trailing statements should be on next line #1249: FILE: drivers/tty/serial/sunzilog.c:1249: + case B300: baud = 300; break; ERROR: trailing statements should be on next line #1250: FILE: drivers/tty/serial/sunzilog.c:1250: + case B600: baud = 600; break; ERROR: trailing statements should be on next line #1251: FILE: drivers/tty/serial/sunzilog.c:1251: + case B1200: baud = 1200; break; ERROR: trailing statements should be on next line #1252: FILE: drivers/tty/serial/sunzilog.c:1252: + case B2400: baud = 2400; break; ERROR: trailing statements should be on next line #1253: FILE: drivers/tty/serial/sunzilog.c:1253: + case B4800: baud = 4800; break; ERROR: trailing statements should be on next line #1254: FILE: drivers/tty/serial/sunzilog.c:1254: + default: case B9600: baud = 9600; break; ERROR: trailing statements should be on next line #1255: FILE: drivers/tty/serial/sunzilog.c:1255: + case B19200: baud = 19200; break; ERROR: trailing statements should be on next line #1256: FILE: drivers/tty/serial/sunzilog.c:1256: + case B38400: baud = 38400; break; Signed-off-by: Enrico Weigelt <info@metux.net>

Simple Rust driver that touches real hardware: PR 2/6

…CKOPT Add verifier ctx test to call bpf_get_netns_cookie from cgroup/setsockopt. torvalds#269/p pass ctx or null check, 1: ctx Did not run the program (not supported) OK torvalds#270/p pass ctx or null check, 2: null Did not run the program (not supported) OK torvalds#271/p pass ctx or null check, 3: 1 OK torvalds#272/p pass ctx or null check, 4: ctx - const OK torvalds#273/p pass ctx or null check, 5: null (connect) Did not run the program (not supported) OK torvalds#274/p pass ctx or null check, 6: null (bind) Did not run the program (not supported) OK torvalds#275/p pass ctx or null check, 7: ctx (bind) Did not run the program (not supported) OK torvalds#276/p pass ctx or null check, 8: null (bind) OK torvalds#277/p pass ctx or null check, 9: ctx (cgroup/setsockopt) Did not run the program (not supported) OK torvalds#278/p pass ctx or null check, 10: null (cgroup/setsockopt) Did not run the program (not supported) OK Signed-off-by: Stanislav Fomichev <sdf@google.com>

rcu_seq_end() increments seq signifying completion of a grace period, after that checks that the seq is even and wakes _synchronize_rcu_expedited(). _synchronize_rcu_expedited() uses wait_event() to wait for even seq. The problem is that wait_event() can return as soon as seq becomes even without waiting for the wakeup. In such case the warning in rcu_seq_end() can falsely fire if the next expedited grace period starts before the check. Check that seq has good value before incrementing it. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: syzkaller@googlegroups.com Cc: linux-kernel@vger.kernel.org Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: josh@joshtriplett.org Cc: jiangshanlai@gmail.com Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> --- syzkaller-triggered warning: WARNING: CPU: 0 PID: 4832 at kernel/rcu/tree.c:3533 rcu_seq_end+0x110/0x140 kernel/rcu/tree.c:3533 CPU: 0 PID: 4832 Comm: kworker/0:3 Not tainted 4.10.0+ torvalds#276 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events wait_rcu_exp_gp Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 rcu_seq_end+0x110/0x140 kernel/rcu/tree.c:3533 rcu_exp_gp_seq_end kernel/rcu/tree_exp.h:36 [inline] rcu_exp_wait_wake+0x8a9/0x1330 kernel/rcu/tree_exp.h:517 rcu_exp_sel_wait_wake kernel/rcu/tree_exp.h:559 [inline] wait_rcu_exp_gp+0x83/0xc0 kernel/rcu/tree_exp.h:570 process_one_work+0xc06/0x1c20 kernel/workqueue.c:2096 worker_thread+0x223/0x19c0 kernel/workqueue.c:2230 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 ---

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@kernel.org>

…test_init() The synth_event_gen_test module can be built in, if someone wants to run the tests at boot up and not have to load them. The synth_event_gen_test_init() function creates and enables the synthetic events and runs its tests. The synth_event_gen_test_exit() disables the events it created and destroys the events. If the module is builtin, the events are never disabled. The issue is, the events should be disable after the tests are run. This could be an issue if the rest of the boot up tests are enabled, as they expect the events to be in a known state before testing. That known state happens to be disabled. When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y a warning will trigger: Running tests on trace events: Testing event create_synth_test: Enabled event during self test! ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1 at kernel/trace/trace_events.c:4150 event_trace_self_tests+0x1c2/0x480 Modules linked in: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-test-00031-gb803d7c664d5-dirty #276 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:event_trace_self_tests+0x1c2/0x480 Code: bb e8 a2 ab 5d fc 48 8d 7b 48 e8 f9 3d 99 fc 48 8b 73 48 40 f6 c6 01 0f 84 d6 fe ff ff 48 c7 c7 20 b6 ad bb e8 7f ab 5d fc 90 <0f> 0b 90 48 89 df e8 d3 3d 99 fc 48 8b 1b 4c 39 f3 0f 85 2c ff ff RSP: 0000:ffffc9000001fdc0 EFLAGS: 00010246 RAX: 0000000000000029 RBX: ffff88810399ca80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffb9f19478 RDI: ffff88823c734e64 RBP: ffff88810399f300 R08: 0000000000000000 R09: fffffbfff79eb32a R10: ffffffffbcf59957 R11: 0000000000000001 R12: ffff888104068090 R13: ffffffffbc89f0a0 R14: ffffffffbc8a0f08 R15: 0000000000000078 FS: 0000000000000000(0000) GS:ffff88823c700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001f6282001 CR4: 0000000000170ef0 Call Trace: <TASK> ? __warn+0xa5/0x200 ? event_trace_self_tests+0x1c2/0x480 ? report_bug+0x1f6/0x220 ? handle_bug+0x6f/0x90 ? exc_invalid_op+0x17/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? tracer_preempt_on+0x78/0x1c0 ? event_trace_self_tests+0x1c2/0x480 ? __pfx_event_trace_self_tests_init+0x10/0x10 event_trace_self_tests_init+0x27/0xe0 do_one_initcall+0xd6/0x3c0 ? __pfx_do_one_initcall+0x10/0x10 ? kasan_set_track+0x25/0x30 ? rcu_is_watching+0x38/0x60 kernel_init_freeable+0x324/0x450 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x1e0 ? _raw_spin_unlock_irq+0x33/0x50 ret_from_fork+0x34/0x60 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is because the synth_event_gen_test_init() left the synthetic events that it created enabled. By having it disable them after testing, the other selftests will run fine. Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 9fe41ef ("tracing: Add synth event generation test module") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: Alexander Graf <graf@amazon.com> Tested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

…test_init() commit 88b30c7 upstream. The synth_event_gen_test module can be built in, if someone wants to run the tests at boot up and not have to load them. The synth_event_gen_test_init() function creates and enables the synthetic events and runs its tests. The synth_event_gen_test_exit() disables the events it created and destroys the events. If the module is builtin, the events are never disabled. The issue is, the events should be disable after the tests are run. This could be an issue if the rest of the boot up tests are enabled, as they expect the events to be in a known state before testing. That known state happens to be disabled. When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y a warning will trigger: Running tests on trace events: Testing event create_synth_test: Enabled event during self test! ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1 at kernel/trace/trace_events.c:4150 event_trace_self_tests+0x1c2/0x480 Modules linked in: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-test-00031-gb803d7c664d5-dirty torvalds#276 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:event_trace_self_tests+0x1c2/0x480 Code: bb e8 a2 ab 5d fc 48 8d 7b 48 e8 f9 3d 99 fc 48 8b 73 48 40 f6 c6 01 0f 84 d6 fe ff ff 48 c7 c7 20 b6 ad bb e8 7f ab 5d fc 90 <0f> 0b 90 48 89 df e8 d3 3d 99 fc 48 8b 1b 4c 39 f3 0f 85 2c ff ff RSP: 0000:ffffc9000001fdc0 EFLAGS: 00010246 RAX: 0000000000000029 RBX: ffff88810399ca80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffb9f19478 RDI: ffff88823c734e64 RBP: ffff88810399f300 R08: 0000000000000000 R09: fffffbfff79eb32a R10: ffffffffbcf59957 R11: 0000000000000001 R12: ffff888104068090 R13: ffffffffbc89f0a0 R14: ffffffffbc8a0f08 R15: 0000000000000078 FS: 0000000000000000(0000) GS:ffff88823c700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001f6282001 CR4: 0000000000170ef0 Call Trace: <TASK> ? __warn+0xa5/0x200 ? event_trace_self_tests+0x1c2/0x480 ? report_bug+0x1f6/0x220 ? handle_bug+0x6f/0x90 ? exc_invalid_op+0x17/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? tracer_preempt_on+0x78/0x1c0 ? event_trace_self_tests+0x1c2/0x480 ? __pfx_event_trace_self_tests_init+0x10/0x10 event_trace_self_tests_init+0x27/0xe0 do_one_initcall+0xd6/0x3c0 ? __pfx_do_one_initcall+0x10/0x10 ? kasan_set_track+0x25/0x30 ? rcu_is_watching+0x38/0x60 kernel_init_freeable+0x324/0x450 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x1e0 ? _raw_spin_unlock_irq+0x33/0x50 ret_from_fork+0x34/0x60 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is because the synth_event_gen_test_init() left the synthetic events that it created enabled. By having it disable them after testing, the other selftests will run fine. Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 9fe41ef ("tracing: Add synth event generation test module") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: Alexander Graf <graf@amazon.com> Tested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-fkuehlin torvalds#276 Not tainted ------------------------------------------------------ kworker/8:2/2676 is trying to acquire lock: ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550 but task is already holding lock: ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&svms->lock){+.+.}-{3:3}: __mutex_lock+0x97/0xd30 kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu] kfd_ioctl+0x1b2/0x5d0 [amdgpu] __x64_sys_ioctl+0x86/0xc0 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #1 (&mm->mmap_lock){++++}-{3:3}: down_read+0x42/0x160 svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}: __lock_acquire+0x1426/0x2200 lock_acquire+0xc1/0x2b0 __flush_work+0x80/0x550 __cancel_work_timer+0x109/0x190 svm_range_bo_release+0xdc/0x1c0 [amdgpu] svm_range_free+0x175/0x180 [amdgpu] svm_range_deferred_list_work+0x15d/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 other info that might help us debug this: Chain exists of: (work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&svms->lock); lock(&mm->mmap_lock); lock(&svms->lock); lock((work_completion)(&svm_bo->eviction_work)); I believe this cannot really lead to a deadlock in practice, because svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO refcount is non-0. That means it's impossible that svm_range_bo_release is running concurrently. However, there is no good way to annotate this. To avoid the problem, take a BO reference in svm_range_schedule_evict_svm_bo instead of in the worker. That way it's impossible for a BO to get freed while eviction work is pending and the cancel_work_sync call in svm_range_bo_release can be eliminated. v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also removed redundant checks that are already done in amdkfd_fence_enable_signaling. Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 47bf0f8 ] ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-fkuehlin torvalds#276 Not tainted ------------------------------------------------------ kworker/8:2/2676 is trying to acquire lock: ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550 but task is already holding lock: ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&svms->lock){+.+.}-{3:3}: __mutex_lock+0x97/0xd30 kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu] kfd_ioctl+0x1b2/0x5d0 [amdgpu] __x64_sys_ioctl+0x86/0xc0 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #1 (&mm->mmap_lock){++++}-{3:3}: down_read+0x42/0x160 svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}: __lock_acquire+0x1426/0x2200 lock_acquire+0xc1/0x2b0 __flush_work+0x80/0x550 __cancel_work_timer+0x109/0x190 svm_range_bo_release+0xdc/0x1c0 [amdgpu] svm_range_free+0x175/0x180 [amdgpu] svm_range_deferred_list_work+0x15d/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 other info that might help us debug this: Chain exists of: (work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&svms->lock); lock(&mm->mmap_lock); lock(&svms->lock); lock((work_completion)(&svm_bo->eviction_work)); I believe this cannot really lead to a deadlock in practice, because svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO refcount is non-0. That means it's impossible that svm_range_bo_release is running concurrently. However, there is no good way to annotate this. To avoid the problem, take a BO reference in svm_range_schedule_evict_svm_bo instead of in the worker. That way it's impossible for a BO to get freed while eviction work is pending and the cancel_work_sync call in svm_range_bo_release can be eliminated. v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also removed redundant checks that are already done in amdkfd_fence_enable_signaling. Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 47bf0f8 ] ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-fkuehlin torvalds#276 Not tainted ------------------------------------------------------ kworker/8:2/2676 is trying to acquire lock: ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550 but task is already holding lock: ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> ChimeraOS#2 (&svms->lock){+.+.}-{3:3}: __mutex_lock+0x97/0xd30 kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu] kfd_ioctl+0x1b2/0x5d0 [amdgpu] __x64_sys_ioctl+0x86/0xc0 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> ChimeraOS#1 (&mm->mmap_lock){++++}-{3:3}: down_read+0x42/0x160 svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}: __lock_acquire+0x1426/0x2200 lock_acquire+0xc1/0x2b0 __flush_work+0x80/0x550 __cancel_work_timer+0x109/0x190 svm_range_bo_release+0xdc/0x1c0 [amdgpu] svm_range_free+0x175/0x180 [amdgpu] svm_range_deferred_list_work+0x15d/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 other info that might help us debug this: Chain exists of: (work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&svms->lock); lock(&mm->mmap_lock); lock(&svms->lock); lock((work_completion)(&svm_bo->eviction_work)); I believe this cannot really lead to a deadlock in practice, because svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO refcount is non-0. That means it's impossible that svm_range_bo_release is running concurrently. However, there is no good way to annotate this. To avoid the problem, take a BO reference in svm_range_schedule_evict_svm_bo instead of in the worker. That way it's impossible for a BO to get freed while eviction work is pending and the cancel_work_sync call in svm_range_bo_release can be eliminated. v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also removed redundant checks that are already done in amdkfd_fence_enable_signaling. Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 47bf0f8 ] ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-fkuehlin torvalds#276 Not tainted ------------------------------------------------------ kworker/8:2/2676 is trying to acquire lock: ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550 but task is already holding lock: ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&svms->lock){+.+.}-{3:3}: __mutex_lock+0x97/0xd30 kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu] kfd_ioctl+0x1b2/0x5d0 [amdgpu] __x64_sys_ioctl+0x86/0xc0 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #1 (&mm->mmap_lock){++++}-{3:3}: down_read+0x42/0x160 svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}: __lock_acquire+0x1426/0x2200 lock_acquire+0xc1/0x2b0 __flush_work+0x80/0x550 __cancel_work_timer+0x109/0x190 svm_range_bo_release+0xdc/0x1c0 [amdgpu] svm_range_free+0x175/0x180 [amdgpu] svm_range_deferred_list_work+0x15d/0x340 [amdgpu] process_one_work+0x27a/0x540 worker_thread+0x53/0x3e0 kthread+0xeb/0x120 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x11/0x20 other info that might help us debug this: Chain exists of: (work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&svms->lock); lock(&mm->mmap_lock); lock(&svms->lock); lock((work_completion)(&svm_bo->eviction_work)); I believe this cannot really lead to a deadlock in practice, because svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO refcount is non-0. That means it's impossible that svm_range_bo_release is running concurrently. However, there is no good way to annotate this. To avoid the problem, take a BO reference in svm_range_schedule_evict_svm_bo instead of in the worker. That way it's impossible for a BO to get freed while eviction work is pending and the cancel_work_sync call in svm_range_bo_release can be eliminated. v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also removed redundant checks that are already done in amdkfd_fence_enable_signaling. Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Christoph Hellwig and others added 30 commits March 4, 2016 23:24

vhost/scsi: Convert to target_alloc_session usage

1ccafc1

Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcm_qla2xxx: Convert to target_alloc_session usage

910e0c6

Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcm_fc: Convert to target_alloc_session usage

869525a

Cc: Vasu Dev <vasu.dev@linux.intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

ib_srpt: Convert to target_alloc_session usage

d74a601

Cc: Vu Pham <vu@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

sbp-target: Conversion to percpu_ida tag pre-allocation

e7741b0

(Fix sbp_mgt_get_req() IS_ERR failure checking - Dan Carpenter) Cc: Chris Boot <bootc@bootc.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

sbp-target: Convert to TARGET_SCF_ACK_KREF I/O krefs

a778862

Cc: Chris Boot <bootc@bootc.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

usb-gadget/tcm: Conversion to percpu_ida tag pre-allocation

1fdf5f7

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

xen-scsiback: Convert to TARGET_SCF_ACK_KREF I/O krefs

130e8a2

Acked-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcm_fc: Convert to TARGET_SCF_ACK_KREF I/O + TMR krefs

c8d336d

Cc: Vasu Dev <vasu.dev@linux.intel.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

ib_srpt: Convert to percpu_ida tag allocation

1335b45

Cc: Vu Pham <vu@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

iser-target: Remove redundant wait in release_conn

c3d141c

With current termination flow we call release_conn after completion. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target/user: Free data ring in unified function

62e7b25

Prepare for data_bitmap in the next patch. Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Sheng Yang <sheng@yasker.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

TheSven73 pushed a commit to TheSven73/linux that referenced this pull request May 25, 2021

Merge pull request torvalds#276 from TheSven73/rust-for-linux-pdev-pr2

698f04d

Simple Rust driver that touches real hardware: PR 2/6

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Structure cleanup #276

Structure cleanup #276

bgly commented Apr 18, 2016

Structure cleanup #276

Structure cleanup #276

Conversation

bgly commented Apr 18, 2016