Merge pull request #1 from torvalds/master #321

w01230 · 2016-09-13T07:20:27Z

pull

…offline_kmem() commit 3a06bb7 upstream. memcg_offline_kmem() may be called from memcg_free_kmem() after a css init failure. memcg_free_kmem() is a ->css_free callback which is called without cgroup_mutex and memcg_offline_kmem() ends up using css_for_each_descendant_pre() without any locking. Fix it by adding rcu read locking around it. mkdir: cannot create directory `65530': No space left on device =============================== [ INFO: suspicious RCU usage. ] 4.6.0-work+ torvalds#321 Not tainted ------------------------------- kernel/cgroup.c:4008 cgroup_mutex or RCU read lock required! [ 527.243970] other info that might help us debug this: [ 527.244715] rcu_scheduler_active = 1, debug_locks = 0 2 locks held by kworker/0:5/1664: #0: ("cgroup_destroy"){.+.+..}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0 #1: ((&css->destroy_work)#3){+.+...}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0 [ 527.248098] stack backtrace: CPU: 0 PID: 1664 Comm: kworker/0:5 Not tainted 4.6.0-work+ torvalds#321 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Workqueue: cgroup_destroy css_free_work_fn Call Trace: dump_stack+0x68/0xa1 lockdep_rcu_suspicious+0xd7/0x110 css_next_descendant_pre+0x7d/0xb0 memcg_offline_kmem.part.44+0x4a/0xc0 mem_cgroup_css_free+0x1ec/0x200 css_free_work_fn+0x49/0x5e0 process_one_work+0x1c5/0x4a0 worker_thread+0x49/0x490 kthread+0xea/0x100 ret_from_fork+0x1f/0x40 Link: http://lkml.kernel.org/r/20160526203018.GG23194@mtj.duckdns.org Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lkl: follow up fixes for strtok_r/strtok_s usage

Since commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ #321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14) [ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4) [ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98) [ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0) [ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174) [ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108) [ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90) [ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634) [ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484) [ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150) [ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: <stable@vger.kernel.org> Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

commit e8c220f upstream. Since commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ #321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14) [ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4) [ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98) [ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0) [ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174) [ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108) [ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90) [ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634) [ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484) [ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150) [ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: <stable@vger.kernel.org> Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ torvalds#321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa66 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com>

gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa66 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit bd5cd35 ] gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ torvalds#321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa66 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

BugLink: https://bugs.launchpad.net/bugs/1867051 [ Upstream commit bd5cd35 ] gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa66 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>

This commit fixes the following checkpatch.pl warnings: WARNING: do not add new typedefs torvalds#47: FILE: hal/HalBtcOutSrc.h:47: +typedef enum _BTC_POWERSAVE_TYPE { WARNING: do not add new typedefs torvalds#54: FILE: hal/HalBtcOutSrc.h:54: +typedef enum _BTC_BT_REG_TYPE { WARNING: do not add new typedefs torvalds#63: FILE: hal/HalBtcOutSrc.h:63: +typedef enum _BTC_CHIP_INTERFACE { WARNING: do not add new typedefs torvalds#71: FILE: hal/HalBtcOutSrc.h:71: +typedef enum _BTC_CHIP_TYPE { WARNING: do not add new typedefs torvalds#81: FILE: hal/HalBtcOutSrc.h:81: +typedef enum _BTC_MSG_TYPE { WARNING: do not add new typedefs torvalds#167: FILE: hal/HalBtcOutSrc.h:167: +typedef struct _BTC_BOARD_INFO { WARNING: do not add new typedefs torvalds#177: FILE: hal/HalBtcOutSrc.h:177: +typedef enum _BTC_DBG_OPCODE { WARNING: do not add new typedefs torvalds#187: FILE: hal/HalBtcOutSrc.h:187: +typedef enum _BTC_RSSI_STATE { WARNING: do not add new typedefs torvalds#200: FILE: hal/HalBtcOutSrc.h:200: +typedef enum _BTC_WIFI_ROLE { WARNING: do not add new typedefs torvalds#208: FILE: hal/HalBtcOutSrc.h:208: +typedef enum _BTC_WIFI_BW_MODE { WARNING: do not add new typedefs torvalds#215: FILE: hal/HalBtcOutSrc.h:215: +typedef enum _BTC_WIFI_TRAFFIC_DIR { WARNING: do not add new typedefs torvalds#221: FILE: hal/HalBtcOutSrc.h:221: +typedef enum _BTC_WIFI_PNP { WARNING: do not add new typedefs torvalds#228: FILE: hal/HalBtcOutSrc.h:228: +typedef enum _BT_WIFI_COEX_STATE { WARNING: do not add new typedefs torvalds#239: FILE: hal/HalBtcOutSrc.h:239: +typedef enum _BTC_GET_TYPE { WARNING: do not add new typedefs torvalds#281: FILE: hal/HalBtcOutSrc.h:281: +typedef enum _BTC_SET_TYPE { WARNING: do not add new typedefs torvalds#321: FILE: hal/HalBtcOutSrc.h:321: +typedef enum _BTC_DBG_DISP_TYPE { WARNING: do not add new typedefs torvalds#328: FILE: hal/HalBtcOutSrc.h:328: +typedef enum _BTC_NOTIFY_TYPE_IPS { WARNING: do not add new typedefs torvalds#334: FILE: hal/HalBtcOutSrc.h:334: +typedef enum _BTC_NOTIFY_TYPE_LPS { WARNING: do not add new typedefs torvalds#340: FILE: hal/HalBtcOutSrc.h:340: +typedef enum _BTC_NOTIFY_TYPE_SCAN { WARNING: do not add new typedefs torvalds#346: FILE: hal/HalBtcOutSrc.h:346: +typedef enum _BTC_NOTIFY_TYPE_ASSOCIATE { WARNING: do not add new typedefs torvalds#352: FILE: hal/HalBtcOutSrc.h:352: +typedef enum _BTC_NOTIFY_TYPE_MEDIA_STATUS { WARNING: do not add new typedefs torvalds#358: FILE: hal/HalBtcOutSrc.h:358: +typedef enum _BTC_NOTIFY_TYPE_SPECIAL_PACKET { WARNING: do not add new typedefs torvalds#366: FILE: hal/HalBtcOutSrc.h:366: +typedef enum _BTC_NOTIFY_TYPE_STACK_OPERATION { WARNING: do not add new typedefs torvalds#374: FILE: hal/HalBtcOutSrc.h:374: +typedef enum _BTC_ANTENNA_POS { WARNING: do not add new typedefs torvalds#412: FILE: hal/HalBtcOutSrc.h:412: +typedef struct _BTC_BT_INFO { WARNING: do not add new typedefs torvalds#440: FILE: hal/HalBtcOutSrc.h:440: +typedef struct _BTC_STACK_INFO { WARNING: do not add new typedefs torvalds#455: FILE: hal/HalBtcOutSrc.h:455: +typedef struct _BTC_BT_LINK_INFO { WARNING: do not add new typedefs torvalds#468: FILE: hal/HalBtcOutSrc.h:468: +typedef struct _BTC_STATISTICS { WARNING: do not add new typedefs torvalds#487: FILE: hal/HalBtcOutSrc.h:487: +typedef struct _BTC_COEXIST { Signed-off-by: Marco Cesati <marco.cesati@gmail.com>

This commit fixes the following checkpatch.pl warnings: WARNING: do not add new typedefs torvalds#47: FILE: hal/HalBtcOutSrc.h:47: +typedef enum _BTC_POWERSAVE_TYPE { WARNING: do not add new typedefs torvalds#54: FILE: hal/HalBtcOutSrc.h:54: +typedef enum _BTC_BT_REG_TYPE { WARNING: do not add new typedefs torvalds#63: FILE: hal/HalBtcOutSrc.h:63: +typedef enum _BTC_CHIP_INTERFACE { WARNING: do not add new typedefs torvalds#71: FILE: hal/HalBtcOutSrc.h:71: +typedef enum _BTC_CHIP_TYPE { WARNING: do not add new typedefs torvalds#81: FILE: hal/HalBtcOutSrc.h:81: +typedef enum _BTC_MSG_TYPE { WARNING: do not add new typedefs torvalds#167: FILE: hal/HalBtcOutSrc.h:167: +typedef struct _BTC_BOARD_INFO { WARNING: do not add new typedefs torvalds#177: FILE: hal/HalBtcOutSrc.h:177: +typedef enum _BTC_DBG_OPCODE { WARNING: do not add new typedefs torvalds#187: FILE: hal/HalBtcOutSrc.h:187: +typedef enum _BTC_RSSI_STATE { WARNING: do not add new typedefs torvalds#200: FILE: hal/HalBtcOutSrc.h:200: +typedef enum _BTC_WIFI_ROLE { WARNING: do not add new typedefs torvalds#208: FILE: hal/HalBtcOutSrc.h:208: +typedef enum _BTC_WIFI_BW_MODE { WARNING: do not add new typedefs torvalds#215: FILE: hal/HalBtcOutSrc.h:215: +typedef enum _BTC_WIFI_TRAFFIC_DIR { WARNING: do not add new typedefs torvalds#221: FILE: hal/HalBtcOutSrc.h:221: +typedef enum _BTC_WIFI_PNP { WARNING: do not add new typedefs torvalds#228: FILE: hal/HalBtcOutSrc.h:228: +typedef enum _BT_WIFI_COEX_STATE { WARNING: do not add new typedefs torvalds#239: FILE: hal/HalBtcOutSrc.h:239: +typedef enum _BTC_GET_TYPE { WARNING: do not add new typedefs torvalds#281: FILE: hal/HalBtcOutSrc.h:281: +typedef enum _BTC_SET_TYPE { WARNING: do not add new typedefs torvalds#321: FILE: hal/HalBtcOutSrc.h:321: +typedef enum _BTC_DBG_DISP_TYPE { WARNING: do not add new typedefs torvalds#328: FILE: hal/HalBtcOutSrc.h:328: +typedef enum _BTC_NOTIFY_TYPE_IPS { WARNING: do not add new typedefs torvalds#334: FILE: hal/HalBtcOutSrc.h:334: +typedef enum _BTC_NOTIFY_TYPE_LPS { WARNING: do not add new typedefs torvalds#340: FILE: hal/HalBtcOutSrc.h:340: +typedef enum _BTC_NOTIFY_TYPE_SCAN { WARNING: do not add new typedefs torvalds#346: FILE: hal/HalBtcOutSrc.h:346: +typedef enum _BTC_NOTIFY_TYPE_ASSOCIATE { WARNING: do not add new typedefs torvalds#352: FILE: hal/HalBtcOutSrc.h:352: +typedef enum _BTC_NOTIFY_TYPE_MEDIA_STATUS { WARNING: do not add new typedefs torvalds#358: FILE: hal/HalBtcOutSrc.h:358: +typedef enum _BTC_NOTIFY_TYPE_SPECIAL_PACKET { WARNING: do not add new typedefs torvalds#366: FILE: hal/HalBtcOutSrc.h:366: +typedef enum _BTC_NOTIFY_TYPE_STACK_OPERATION { WARNING: do not add new typedefs torvalds#374: FILE: hal/HalBtcOutSrc.h:374: +typedef enum _BTC_ANTENNA_POS { WARNING: do not add new typedefs torvalds#412: FILE: hal/HalBtcOutSrc.h:412: +typedef struct _BTC_BT_INFO { WARNING: do not add new typedefs torvalds#440: FILE: hal/HalBtcOutSrc.h:440: +typedef struct _BTC_STACK_INFO { WARNING: do not add new typedefs torvalds#455: FILE: hal/HalBtcOutSrc.h:455: +typedef struct _BTC_BT_LINK_INFO { WARNING: do not add new typedefs torvalds#468: FILE: hal/HalBtcOutSrc.h:468: +typedef struct _BTC_STATISTICS { WARNING: do not add new typedefs torvalds#487: FILE: hal/HalBtcOutSrc.h:487: +typedef struct _BTC_COEXIST { Signed-off-by: Marco Cesati <marco.cesati@gmail.com> Link: https://lore.kernel.org/r/20210312082638.25512-2-marco.cesati@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>

…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 linux-sunxi#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

This patch fix the follwing checkpatch warnings: WARNING: quoted string split across lines torvalds#129: FILE: drivers/staging/vme_user/vme_tsi148.c:129: + dev_err(tsi148_bridge->parent, "VME Mailbox %d received" + ": 0x%x\n", i, val); WARNING: quoted string split across lines torvalds#147: FILE: drivers/staging/vme_user/vme_tsi148.c:147: + dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, " + "attributes: %08x\n", WARNING: quoted string split across lines torvalds#153: FILE: drivers/staging/vme_user/vme_tsi148.c:153: + dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split " + "completion reg: %08x\n", WARNING: quoted string split across lines torvalds#185: FILE: drivers/staging/vme_user/vme_tsi148.c:185: + dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow " + "Occurred\n"); WARNING: quoted string split across lines torvalds#321: FILE: drivers/staging/vme_user/vme_tsi148.c:321: + dev_err(tsi148_bridge->parent, "Can't get assigned pci irq " + "vector %02X\n", pdev->irq); WARNING: quoted string split across lines torvalds#533: FILE: drivers/staging/vme_user/vme_tsi148.c:533: + dev_err(tsi148_bridge->parent, "Invalid PCI Offset " + "alignment\n"); WARNING: space prohibited before semicolon torvalds#591: FILE: drivers/staging/vme_user/vme_tsi148.c:591: + temp_ctl |= TSI148_LCSR_ITAT_SUPR ; WARNING: quoted string split across lines torvalds#766: FILE: drivers/staging/vme_user/vme_tsi148.c:766: + dev_err(tsi148_bridge->parent, "Failed to allocate mem " + "resource for window %d size 0x%lx start 0x%lx\n", WARNING: quoted string split across lines torvalds#831: FILE: drivers/staging/vme_user/vme_tsi148.c:831: + dev_err(tsi148_bridge->parent, "Invalid VME Window " + "alignment\n"); WARNING: quoted string split across lines torvalds#838: FILE: drivers/staging/vme_user/vme_tsi148.c:838: + dev_err(tsi148_bridge->parent, "Size must be non-zero for " + "enabled windows\n"); WARNING: quoted string split across lines torvalds#853: FILE: drivers/staging/vme_user/vme_tsi148.c:853: + dev_err(tsi148_bridge->parent, "Unable to allocate memory for " + "resource\n"); WARNING: quoted string split across lines torvalds#894: FILE: drivers/staging/vme_user/vme_tsi148.c:894: + dev_err(tsi148_bridge->parent, "Invalid VME Offset " + "alignment\n"); WARNING: quoted string split across lines torvalds#941: FILE: drivers/staging/vme_user/vme_tsi148.c:941: + dev_warn(tsi148_bridge->parent, "Currently not setting " + "Broadcast Select Registers\n"); WARNING: quoted string split across lines #1455: FILE: drivers/staging/vme_user/vme_tsi148.c:1455: + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); WARNING: quoted string split across lines #1554: FILE: drivers/staging/vme_user/vme_tsi148.c:1554: + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); WARNING: quoted string split across lines #1643: FILE: drivers/staging/vme_user/vme_tsi148.c:1643: + dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 " + "byte boundary as required: %p\n", WARNING: else is not generally useful after a break or return #1830: FILE: drivers/staging/vme_user/vme_tsi148.c:1830: + return -EBUSY; + } else { warning: quoted string split across lines #1939: file: drivers/staging/vme_user/vme_tsi148.c:1939: + dev_err(tsi148_bridge->parent, "location monitor " + "callback attached, can't reset\n"); WARNING: space prohibited before semicolon #1964: FILE: drivers/staging/vme_user/vme_tsi148.c:1964: + lm_ctl |= TSI148_LCSR_LMAT_SUPR ; WARNING: quoted string split across lines #2055: FILE: drivers/staging/vme_user/vme_tsi148.c:2055: + dev_err(tsi148_bridge->parent, "Location monitor not properly " + "configured\n"); WARNING: quoted string split across lines #2200: FILE: drivers/staging/vme_user/vme_tsi148.c:2200: + dev_err(tsi148_bridge->parent, "Failed to allocate memory for " + "CR/CSR image\n"); WARNING: quoted string split across lines #2241: FILE: drivers/staging/vme_user/vme_tsi148.c:2241: + dev_err(tsi148_bridge->parent, "Configuring flush image" + " failed\n"); Signed-off-by: Mingyi Kang <jerrykang026@gmail.com>

This patch fix the follwing checkpatch warnings: WARNING: quoted string split across lines torvalds#129: FILE: drivers/staging/vme_user/vme_tsi148.c:129: + dev_err(tsi148_bridge->parent, "VME Mailbox %d received" + ": 0x%x\n", i, val); WARNING: quoted string split across lines torvalds#147: FILE: drivers/staging/vme_user/vme_tsi148.c:147: + dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, " + "attributes: %08x\n", WARNING: quoted string split across lines torvalds#153: FILE: drivers/staging/vme_user/vme_tsi148.c:153: + dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split " + "completion reg: %08x\n", WARNING: quoted string split across lines torvalds#185: FILE: drivers/staging/vme_user/vme_tsi148.c:185: + dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow " + "Occurred\n"); WARNING: quoted string split across lines torvalds#321: FILE: drivers/staging/vme_user/vme_tsi148.c:321: + dev_err(tsi148_bridge->parent, "Can't get assigned pci irq " + "vector %02X\n", pdev->irq); WARNING: quoted string split across lines torvalds#533: FILE: drivers/staging/vme_user/vme_tsi148.c:533: + dev_err(tsi148_bridge->parent, "Invalid PCI Offset " + "alignment\n"); WARNING: space prohibited before semicolon torvalds#591: FILE: drivers/staging/vme_user/vme_tsi148.c:591: + temp_ctl |= TSI148_LCSR_ITAT_SUPR ; WARNING: quoted string split across lines torvalds#766: FILE: drivers/staging/vme_user/vme_tsi148.c:766: + dev_err(tsi148_bridge->parent, "Failed to allocate mem " + "resource for window %d size 0x%lx start 0x%lx\n", WARNING: quoted string split across lines torvalds#831: FILE: drivers/staging/vme_user/vme_tsi148.c:831: + dev_err(tsi148_bridge->parent, "Invalid VME Window " + "alignment\n"); WARNING: quoted string split across lines torvalds#838: FILE: drivers/staging/vme_user/vme_tsi148.c:838: + dev_err(tsi148_bridge->parent, "Size must be non-zero for " + "enabled windows\n"); WARNING: quoted string split across lines torvalds#853: FILE: drivers/staging/vme_user/vme_tsi148.c:853: + dev_err(tsi148_bridge->parent, "Unable to allocate memory for " + "resource\n"); WARNING: quoted string split across lines torvalds#894: FILE: drivers/staging/vme_user/vme_tsi148.c:894: + dev_err(tsi148_bridge->parent, "Invalid VME Offset " + "alignment\n"); WARNING: quoted string split across lines torvalds#941: FILE: drivers/staging/vme_user/vme_tsi148.c:941: + dev_warn(tsi148_bridge->parent, "Currently not setting " + "Broadcast Select Registers\n"); WARNING: quoted string split across lines #1455: FILE: drivers/staging/vme_user/vme_tsi148.c:1455: + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); WARNING: quoted string split across lines #1554: FILE: drivers/staging/vme_user/vme_tsi148.c:1554: + dev_err(dev, "Currently not setting Broadcast Select " + "Registers\n"); WARNING: quoted string split across lines #1643: FILE: drivers/staging/vme_user/vme_tsi148.c:1643: + dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 " + "byte boundary as required: %p\n", WARNING: else is not generally useful after a break or return #1830: FILE: drivers/staging/vme_user/vme_tsi148.c:1830: + return -EBUSY; + } else { warning: quoted string split across lines #1939: file: drivers/staging/vme_user/vme_tsi148.c:1939: + dev_err(tsi148_bridge->parent, "location monitor " + "callback attached, can't reset\n"); WARNING: space prohibited before semicolon #1964: FILE: drivers/staging/vme_user/vme_tsi148.c:1964: + lm_ctl |= TSI148_LCSR_LMAT_SUPR ; WARNING: quoted string split across lines #2055: FILE: drivers/staging/vme_user/vme_tsi148.c:2055: + dev_err(tsi148_bridge->parent, "Location monitor not properly " + "configured\n"); WARNING: quoted string split across lines #2200: FILE: drivers/staging/vme_user/vme_tsi148.c:2200: + dev_err(tsi148_bridge->parent, "Failed to allocate memory for " + "CR/CSR image\n"); WARNING: quoted string split across lines #2241: FILE: drivers/staging/vme_user/vme_tsi148.c:2241: + dev_err(tsi148_bridge->parent, "Configuring flush image" + " failed\n"); Signed-off-by: Mingyi Kang <jerrykang026@gmail.com> Link: https://lore.kernel.org/r/20220730045726.55452-1-jerrykang026@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PD#152879: driver defect clean up torvalds#299 torvalds#300 torvalds#320 torvalds#321 Change-Id: I3756489ea81520ab042c74642b0483f36bff6fba Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>

Merge pull request #1 from torvalds/master

e4034a8

pull

w01230 closed this Sep 13, 2016

laijs pushed a commit to laijs/linux that referenced this pull request Feb 14, 2017

Merge pull request torvalds#321 from libos-nuse/fix-qdisc-strtok

307e241

lkl: follow up fixes for strtok_r/strtok_s usage

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge pull request #1 from torvalds/master #321

Merge pull request #1 from torvalds/master #321

w01230 commented Sep 13, 2016

Merge pull request #1 from torvalds/master #321

Merge pull request #1 from torvalds/master #321

Conversation

w01230 commented Sep 13, 2016