add latest cura profile ini

Cura/NM+Cura+Profile+062316.ini

@@ -0,0 +1,124 @@
+[profile]
+layer_height = 0.2
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = 1.2
+fill_density = 15
+print_speed = 60
+print_temperature = 210
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = Raft
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 1.75
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100
+nozzle_size = 0.4
+retraction_speed = 15
+retraction_amount = 4.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1
+retraction_combing = All
+retraction_minimal_extrusion = 0.02
+retraction_hop = 2
+bottom_thickness = 0.2
+layer0_width_factor = 120
+object_sink = 0
+overlap_dual = 0.15
+travel_speed = 80
+bottom_layer_speed = 20
+infill_speed = 60
+solidarea_speed = 40
+inset0_speed = 40
+insetx_speed = 60
+cool_min_layer_time = 10
+fan_enabled = True
+skirt_line_count = 0
+skirt_gap = 3.0
+skirt_minimal_length = 150.0
+fan_full_height = 0
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+perimeter_before_infill = False
+support_type = Lines
+support_angle = 60
+support_fill_rate = 15
+support_xy_distance = 0.7
+support_z_distance = 0.25
+spiralize = False
+simple_mode = False
+brim_line_count = 20
+raft_margin = 3
+raft_line_spacing = 3.0
+raft_base_thickness = 0.2
+raft_base_linewidth = 0.5
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.20
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = (lp1
+	.
+object_center_x = 0
+object_center_y = 0
+
+[alterations]
+start.gcode = G90
+	G1 F300 Z1
+	G1 F1200 X77 Y15
+	G1 F300 Z0.315
+	G92 E0
+	G1 F2520 X77 Y-35 E4
+	G1 F2520 X77.5 Y-35 E4.05
+	G1 F2520 X77.5 Y36 E8
+	G1 F5000 X77.25 Y36
+	G92 E0
+	G1 F2520 X77.25 Y-35 E4
+	G1 F2520 X77.75 Y-35 E4.05
+	G1 F2520 X77.75 Y36 E8
+	G1 F5000 X77 Y0
+	G1 F300 Z1
+	G1 X0 Y0 F5000
+	G92 E0
+end.gcode = G92 E0
+	G1 F360 E-2
+	G1 F300 Z128
+	G1 F3000 X0 Y40
+	M104 S0
+start2.gcode = 
+end2.gcode = 
+start3.gcode = 
+end3.gcode = 
+start4.gcode = 
+end4.gcode = 
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+