-
|
Hi, I just received my ZW Kit and installed the ZB7Pro on it. Powering and Connecting via RJ45 worked and I can open http://IP which shows me the serial connection status and gives me a reset button besides the log. When I try to connect via tcp://IP:6638 or socket://IP.6638 on my HA I got connection failed while the log of ESP shows me connected and disconnected. I reflashed the ZW-Kit Binary, but same issue. 
|
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
You must use the Z-Wave JS UI addon or other type of install to be able to use a tcp:// device. Unfortunately the built in Z-Wave JS in HA only support directly connected usb/serial devices. Also ignore any discovered Zigbee Home Automation devices. There is some old discovery code in HA that recognizes any TubesZB device as a zigbee coordinator. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the fast reply. This resolved the issue. It's working using the addon :-) |
Beta Was this translation helpful? Give feedback.
You must use the Z-Wave JS UI addon or other type of install to be able to use a tcp:// device. Unfortunately the built in Z-Wave JS in HA only support directly connected usb/serial devices.
Also ignore any discovered Zigbee Home Automation devices. There is some old discovery code in HA that recognizes any TubesZB device as a zigbee coordinator.