dokku mariadb

Official mariadb plugin for dokku. Currently defaults to installing mariadb 10.11.3.

Requirements

• dokku 0.19.x+
• docker 1.8.x

Installation

# on 0.19.x+
sudo dokku plugin:install https://github.com/dokku/dokku-mariadb.git mariadb

Commands

mariadb:app-links <app>                            # list all mariadb service links for a given app
mariadb:backup <service> <bucket-name> [--use-iam] # create a backup of the mariadb service to an existing s3 bucket
mariadb:backup-auth <service> <aws-access-key-id> <aws-secret-access-key> <aws-default-region> <aws-signature-version> <endpoint-url> # set up authentication for backups on the mariadb service
mariadb:backup-deauth <service>                    # remove backup authentication for the mariadb service
mariadb:backup-schedule <service> <schedule> <bucket-name> [--use-iam] # schedule a backup of the mariadb service
mariadb:backup-schedule-cat <service>              # cat the contents of the configured backup cronfile for the service
mariadb:backup-set-encryption <service> <passphrase> # set encryption for all future backups of mariadb service
mariadb:backup-unschedule <service>                # unschedule the backup of the mariadb service
mariadb:backup-unset-encryption <service>          # unset encryption for future backups of the mariadb service
mariadb:clone <service> <new-service> [--clone-flags...] # create container <new-name> then copy data from <name> into <new-name>
mariadb:connect <service>                          # connect to the service via the mariadb connection tool
mariadb:create <service> [--create-flags...]       # create a mariadb service
mariadb:destroy <service> [-f|--force]             # delete the mariadb service/data/container if there are no links left
mariadb:enter <service>                            # enter or run a command in a running mariadb service container
mariadb:exists <service>                           # check if the mariadb service exists
mariadb:export <service>                           # export a dump of the mariadb service database
mariadb:expose <service> <ports...>                # expose a mariadb service on custom host:port if provided (random port on the 0.0.0.0 interface if otherwise unspecified)
mariadb:import <service>                           # import a dump into the mariadb service database
mariadb:info <service> [--single-info-flag]        # print the service information
mariadb:link <service> <app> [--link-flags...]     # link the mariadb service to the app
mariadb:linked <service> <app>                     # check if the mariadb service is linked to an app
mariadb:links <service>                            # list all apps linked to the mariadb service
mariadb:list                                       # list all mariadb services
mariadb:logs <service> [-t|--tail] <tail-num-optional> # print the most recent log(s) for this service
mariadb:pause <service>                            # pause a running mariadb service
mariadb:promote <service> <app>                    # promote service <service> as DATABASE_URL in <app>
mariadb:restart <service>                          # graceful shutdown and restart of the mariadb service container
mariadb:set <service> <key> <value>                # set or clear a property for a service
mariadb:start <service>                            # start a previously stopped mariadb service
mariadb:stop <service>                             # stop a running mariadb service
mariadb:unexpose <service>                         # unexpose a previously exposed mariadb service
mariadb:unlink <service> <app>                     # unlink the mariadb service from the app
mariadb:upgrade <service> [--upgrade-flags...]     # upgrade service <service> to the specified versions

Usage

Help for any commands can be displayed by specifying the command as an argument to mariadb:help. Plugin help output in conjunction with any files in the docs/ folder is used to generate the plugin documentation. Please consult the mariadb:help command for any undocumented commands.

Basic Usage

create a mariadb service

# usage
dokku mariadb:create <service> [--create-flags...]

flags:

• -c|--config-options "--args --go=here": extra arguments to pass to the container create command (default: None)
• -C|--custom-env "USER=alpha;HOST=beta": semi-colon delimited environment variables to start the service with
• -i|--image IMAGE: the image name to start the service with
• -I|--image-version IMAGE_VERSION: the image version to start the service with
• -m|--memory MEMORY: container memory limit in megabytes (default: unlimited)
• -N|--initial-network INITIAL_NETWORK: the initial network to attach the service to
• -p|--password PASSWORD: override the user-level service password
• -P|--post-create-network NETWORKS: a comman-separated list of networks to attach the service container to after service creation
• -r|--root-password PASSWORD: override the root-level service password
• -S|--post-start-network NETWORKS: a comman-separated list of networks to attach the service container to after service start
• -s|--shm-size SHM_SIZE: override shared memory size for mariadb docker container

Create a mariadb service named lollipop:

dokku mariadb:create lollipop

You can also specify the image and image version to use for the service. It must be compatible with the mariadb image.

export MARIADB_IMAGE="mariadb"
export MARIADB_IMAGE_VERSION="${PLUGIN_IMAGE_VERSION}"
dokku mariadb:create lollipop

You can also specify custom environment variables to start the mariadb service in semi-colon separated form.

export MARIADB_CUSTOM_ENV="USER=alpha;HOST=beta"
dokku mariadb:create lollipop

print the service information

# usage
dokku mariadb:info <service> [--single-info-flag]

flags:

• --config-dir: show the service configuration directory
• --data-dir: show the service data directory
• --dsn: show the service DSN
• --exposed-ports: show service exposed ports
• --id: show the service container id
• --internal-ip: show the service internal ip
• --initial-network: show the initial network being connected to
• --links: show the service app links
• --post-create-network: show the networks to attach to after service container creation
• --post-start-network: show the networks to attach to after service container start
• --service-root: show the service root directory
• --status: show the service running status
• --version: show the service image version

Get connection information as follows:

dokku mariadb:info lollipop

You can also retrieve a specific piece of service info via flags:

dokku mariadb:info lollipop --config-dir
dokku mariadb:info lollipop --data-dir
dokku mariadb:info lollipop --dsn
dokku mariadb:info lollipop --exposed-ports
dokku mariadb:info lollipop --id
dokku mariadb:info lollipop --internal-ip
dokku mariadb:info lollipop --initial-network
dokku mariadb:info lollipop --links
dokku mariadb:info lollipop --post-create-network
dokku mariadb:info lollipop --post-start-network
dokku mariadb:info lollipop --service-root
dokku mariadb:info lollipop --status
dokku mariadb:info lollipop --version

list all mariadb services

# usage
dokku mariadb:list 

List all services:

dokku mariadb:list

print the most recent log(s) for this service

# usage
dokku mariadb:logs <service> [-t|--tail] <tail-num-optional>

flags:

• -t|--tail [<tail-num>]: do not stop when end of the logs are reached and wait for additional output

You can tail logs for a particular service:

dokku mariadb:logs lollipop

By default, logs will not be tailed, but you can do this with the --tail flag:

dokku mariadb:logs lollipop --tail

The default tail setting is to show all logs, but an initial count can also be specified:

dokku mariadb:logs lollipop --tail 5

link the mariadb service to the app

# usage
dokku mariadb:link <service> <app> [--link-flags...]

flags:

• -a|--alias "BLUE_DATABASE": an alternative alias to use for linking to an app via environment variable
• -q|--querystring "pool=5": ampersand delimited querystring arguments to append to the service link
• -n|--no-restart "false": whether or not to restart the app on link (default: true)

A mariadb service can be linked to a container. This will use native docker links via the docker-options plugin. Here we link it to our playground app.

NOTE: this will restart your app

dokku mariadb:link lollipop playground

The following environment variables will be set automatically by docker (not on the app itself, so they won’t be listed when calling dokku config):

DOKKU_MARIADB_LOLLIPOP_NAME=/lollipop/DATABASE
DOKKU_MARIADB_LOLLIPOP_PORT=tcp://172.17.0.1:3306
DOKKU_MARIADB_LOLLIPOP_PORT_3306_TCP=tcp://172.17.0.1:3306
DOKKU_MARIADB_LOLLIPOP_PORT_3306_TCP_PROTO=tcp
DOKKU_MARIADB_LOLLIPOP_PORT_3306_TCP_PORT=3306
DOKKU_MARIADB_LOLLIPOP_PORT_3306_TCP_ADDR=172.17.0.1

The following will be set on the linked application by default:

DATABASE_URL=mysql://mariadb:SOME_PASSWORD@dokku-mariadb-lollipop:3306/lollipop

The host exposed here only works internally in docker containers. If you want your container to be reachable from outside, you should use the expose subcommand. Another service can be linked to your app:

dokku mariadb:link other_service playground

It is possible to change the protocol for DATABASE_URL by setting the environment variable MARIADB_DATABASE_SCHEME on the app. Doing so will after linking will cause the plugin to think the service is not linked, and we advise you to unlink before proceeding.

dokku config:set playground MARIADB_DATABASE_SCHEME=mysql2
dokku mariadb:link lollipop playground

This will cause DATABASE_URL to be set as:

mysql2://mariadb:SOME_PASSWORD@dokku-mariadb-lollipop:3306/lollipop

unlink the mariadb service from the app

# usage
dokku mariadb:unlink <service> <app>

flags:

• -n|--no-restart "false": whether or not to restart the app on unlink (default: true)

You can unlink a mariadb service:

NOTE: this will restart your app and unset related environment variables

dokku mariadb:unlink lollipop playground

set or clear a property for a service

# usage
dokku mariadb:set <service> <key> <value>

Set the network to attach after the service container is started:

dokku mariadb:set lollipop post-create-network custom-network

Set multiple networks:

dokku mariadb:set lollipop post-create-network custom-network,other-network

Unset the post-create-network value:

dokku mariadb:set lollipop post-create-network

Service Lifecycle

The lifecycle of each service can be managed through the following commands:

connect to the service via the mariadb connection tool

# usage
dokku mariadb:connect <service>

Connect to the service via the mariadb connection tool:

NOTE: disconnecting from ssh while running this command may leave zombie processes due to moby/moby#9098

dokku mariadb:connect lollipop

enter or run a command in a running mariadb service container

# usage
dokku mariadb:enter <service>

A bash prompt can be opened against a running service. Filesystem changes will not be saved to disk.

NOTE: disconnecting from ssh while running this command may leave zombie processes due to moby/moby#9098

dokku mariadb:enter lollipop

You may also run a command directly against the service. Filesystem changes will not be saved to disk.

dokku mariadb:enter lollipop touch /tmp/test

expose a mariadb service on custom host:port if provided (random port on the 0.0.0.0 interface if otherwise unspecified)

# usage
dokku mariadb:expose <service> <ports...>

Expose the service on the service's normal ports, allowing access to it from the public interface (0.0.0.0):

dokku mariadb:expose lollipop 3306

Expose the service on the service's normal ports, with the first on a specified ip adddress (127.0.0.1):

dokku mariadb:expose lollipop 127.0.0.1:3306

unexpose a previously exposed mariadb service

# usage
dokku mariadb:unexpose <service>

Unexpose the service, removing access to it from the public interface (0.0.0.0):

dokku mariadb:unexpose lollipop

promote service as DATABASE_URL in

# usage
dokku mariadb:promote <service> <app>

If you have a mariadb service linked to an app and try to link another mariadb service another link environment variable will be generated automatically:

DOKKU_DATABASE_BLUE_URL=mysql://other_service:ANOTHER_PASSWORD@dokku-mariadb-other-service:3306/other_service

You can promote the new service to be the primary one:

NOTE: this will restart your app

dokku mariadb:promote other_service playground

This will replace DATABASE_URL with the url from other_service and generate another environment variable to hold the previous value if necessary. You could end up with the following for example:

DATABASE_URL=mysql://other_service:ANOTHER_PASSWORD@dokku-mariadb-other-service:3306/other_service
DOKKU_DATABASE_BLUE_URL=mysql://other_service:ANOTHER_PASSWORD@dokku-mariadb-other-service:3306/other_service
DOKKU_DATABASE_SILVER_URL=mysql://lollipop:SOME_PASSWORD@dokku-mariadb-lollipop:3306/lollipop

start a previously stopped mariadb service

# usage
dokku mariadb:start <service>

Start the service:

dokku mariadb:start lollipop

stop a running mariadb service

# usage
dokku mariadb:stop <service>

Stop the service and removes the running container:

dokku mariadb:stop lollipop

pause a running mariadb service

# usage
dokku mariadb:pause <service>

Pause the running container for the service:

dokku mariadb:pause lollipop

graceful shutdown and restart of the mariadb service container

# usage
dokku mariadb:restart <service>

Restart the service:

dokku mariadb:restart lollipop

upgrade service to the specified versions

# usage
dokku mariadb:upgrade <service> [--upgrade-flags...]

flags:

• -c|--config-options "--args --go=here": extra arguments to pass to the container create command (default: None)
• -C|--custom-env "USER=alpha;HOST=beta": semi-colon delimited environment variables to start the service with
• -i|--image IMAGE: the image name to start the service with
• -I|--image-version IMAGE_VERSION: the image version to start the service with
• -N|--initial-network INITIAL_NETWORK: the initial network to attach the service to
• -P|--post-create-network NETWORKS: a comman-separated list of networks to attach the service container to after service creation
• -R|--restart-apps "true": whether or not to force an app restart (default: false)
• -S|--post-start-network NETWORKS: a comman-separated list of networks to attach the service container to after service start
• -s|--shm-size SHM_SIZE: override shared memory size for mariadb docker container

You can upgrade an existing service to a new image or image-version:

dokku mariadb:upgrade lollipop

Service Automation

Service scripting can be executed using the following commands:

list all mariadb service links for a given app

# usage
dokku mariadb:app-links <app>

List all mariadb services that are linked to the playground app.

dokku mariadb:app-links playground

create container then copy data from into

# usage
dokku mariadb:clone <service> <new-service> [--clone-flags...]

flags:

• -c|--config-options "--args --go=here": extra arguments to pass to the container create command (default: None)
• -C|--custom-env "USER=alpha;HOST=beta": semi-colon delimited environment variables to start the service with
• -i|--image IMAGE: the image name to start the service with
• -I|--image-version IMAGE_VERSION: the image version to start the service with
• -m|--memory MEMORY: container memory limit in megabytes (default: unlimited)
• -N|--initial-network INITIAL_NETWORK: the initial network to attach the service to
• -p|--password PASSWORD: override the user-level service password
• -P|--post-create-network NETWORKS: a comman-separated list of networks to attach the service container to after service creation
• -r|--root-password PASSWORD: override the root-level service password
• -S|--post-start-network NETWORKS: a comman-separated list of networks to attach the service container to after service start
• -s|--shm-size SHM_SIZE: override shared memory size for mariadb docker container

You can clone an existing service to a new one:

dokku mariadb:clone lollipop lollipop-2

check if the mariadb service exists

# usage
dokku mariadb:exists <service>

Here we check if the lollipop mariadb service exists.

dokku mariadb:exists lollipop

check if the mariadb service is linked to an app

# usage
dokku mariadb:linked <service> <app>

Here we check if the lollipop mariadb service is linked to the playground app.

dokku mariadb:linked lollipop playground

list all apps linked to the mariadb service

# usage
dokku mariadb:links <service>

List all apps linked to the lollipop mariadb service.

dokku mariadb:links lollipop

Data Management

The underlying service data can be imported and exported with the following commands:

import a dump into the mariadb service database

# usage
dokku mariadb:import <service>

Import a datastore dump:

dokku mariadb:import lollipop < data.dump

export a dump of the mariadb service database

# usage
dokku mariadb:export <service>

By default, datastore output is exported to stdout:

dokku mariadb:export lollipop

You can redirect this output to a file:

dokku mariadb:export lollipop > data.dump

Backups

Datastore backups are supported via AWS S3 and S3 compatible services like minio.

You may skip the backup-auth step if your dokku install is running within EC2 and has access to the bucket via an IAM profile. In that case, use the --use-iam option with the backup command.

Backups can be performed using the backup commands:

set up authentication for backups on the mariadb service

# usage
dokku mariadb:backup-auth <service> <aws-access-key-id> <aws-secret-access-key> <aws-default-region> <aws-signature-version> <endpoint-url>

Setup s3 backup authentication:

dokku mariadb:backup-auth lollipop AWS_ACCESS_KEY_ID AWS_SECRET_ACCESS_KEY

Setup s3 backup authentication with different region:

dokku mariadb:backup-auth lollipop AWS_ACCESS_KEY_ID AWS_SECRET_ACCESS_KEY AWS_REGION

Setup s3 backup authentication with different signature version and endpoint:

dokku mariadb:backup-auth lollipop AWS_ACCESS_KEY_ID AWS_SECRET_ACCESS_KEY AWS_REGION AWS_SIGNATURE_VERSION ENDPOINT_URL

More specific example for minio auth:

dokku mariadb:backup-auth lollipop MINIO_ACCESS_KEY_ID MINIO_SECRET_ACCESS_KEY us-east-1 s3v4 https://YOURMINIOSERVICE

remove backup authentication for the mariadb service

# usage
dokku mariadb:backup-deauth <service>

Remove s3 authentication:

dokku mariadb:backup-deauth lollipop

create a backup of the mariadb service to an existing s3 bucket

# usage
dokku mariadb:backup <service> <bucket-name> [--use-iam]

flags:

• -u|--use-iam: use the IAM profile associated with the current server

Backup the lollipop service to the my-s3-bucket bucket on AWS:`

dokku mariadb:backup lollipop my-s3-bucket --use-iam

Restore a backup file (assuming it was extracted via tar -xf backup.tgz):

dokku mariadb:import lollipop < backup-folder/export

set encryption for all future backups of mariadb service

# usage
dokku mariadb:backup-set-encryption <service> <passphrase>

Set the GPG-compatible passphrase for encrypting backups for backups:

dokku mariadb:backup-set-encryption lollipop

unset encryption for future backups of the mariadb service

# usage
dokku mariadb:backup-unset-encryption <service>

Unset the GPG encryption passphrase for backups:

dokku mariadb:backup-unset-encryption lollipop

schedule a backup of the mariadb service

# usage
dokku mariadb:backup-schedule <service> <schedule> <bucket-name> [--use-iam]

flags:

• -u|--use-iam: use the IAM profile associated with the current server

Schedule a backup:

'schedule' is a crontab expression, eg. "0 3 * * *" for each day at 3am

dokku mariadb:backup-schedule lollipop "0 3 * * *" my-s3-bucket

Schedule a backup and authenticate via iam:

dokku mariadb:backup-schedule lollipop "0 3 * * *" my-s3-bucket --use-iam

cat the contents of the configured backup cronfile for the service

# usage
dokku mariadb:backup-schedule-cat <service>

Cat the contents of the configured backup cronfile for the service:

dokku mariadb:backup-schedule-cat lollipop

unschedule the backup of the mariadb service

# usage
dokku mariadb:backup-unschedule <service>

Remove the scheduled backup from cron:

dokku mariadb:backup-unschedule lollipop

Disabling docker image pull calls

If you wish to disable the docker image pull calls that the plugin triggers, you may set the MARIADB_DISABLE_PULL environment variable to true. Once disabled, you will need to pull the service image you wish to deploy as shown in the stderr output.

Please ensure the proper images are in place when docker image pull is disabled.