check_fritz

Table of Contents

1. Introduction
2. Support
3. Requirements
4. Installation
5. Usage

Introduction

This is a check plugin, written in Go, for Icinga 2 to monitor a Fritz!Box.

Support

Please ask your questions related to the configuration in the community channels. For bugs and feature requests please open an issue.

Requirements

The TR-064 feature must be enabled on the Fritz!Box.

You can enable the feature in the following menu:

Heimnetz -> Netzwerk -> Netzwerkeinstellungen ->  Heimnetzfreigaben -> Zugriff für Anwendungen zulassen

Installation

• Download the latest stable binary package for your architecture from the release page.
• Verify the checksum using sha256sum.

Example:

$ wget [DOWNLOAD URL CURRENT RELEASE]]/check_fritz.linux.amd64
$ wget [DOWNLOAD URL CURRENT RELEASE]]/check_fritz.linux.amd64.sha256

$ sha256sum -c check_fritz.linux.amd64.sha256
check_fritz.linux.amd64: OK

The checksum verification must return OK.

If you successfully verified the checksum, move the check plugin binary to your Icinga 2 plugin directory. It is also recommended to rename the binary package to check_fritz, since the suffix is only required for the checksum verification.

Ensure that you also set the executable bit with chmod +x check_fritz.

Usage

Parameter

Parameter (short)	Parameter (long)	Description
-H	--hostname	Optional. IP-Address or Hostname of the Fritz!Box. Defaults to fritz.box.
-P	--port	Optional. Port for TR-064 over SSL. Defaults to 49443.
-u	--username	Optional. Fritz!Box web interface Username for authentication. Defaults to dslf-config.
-p	--password	Required. Fritz!Box web interface Password for authentication.
-m	--method	Optional. Defines the used check method. Defaults to connection_status.
-w	--warning	Optional. Defines a warning threshold. Defaults to none.
-c	--critical	Optional. Defines a critical threshold. Defaults to none.
-a	--ain	Optional. Defines the AIN required by smart device check methods. Defaults to none.
-t	--timeout	Optional. Defines the timeout in seconds to wait for an answer from the Fritz!Box. Defaults to 90.
-M	--modelgroup	Optional. Defines the Fritz!Box model group. Supported model groups are DSL and Cable. Defaults to DSL.

Note:

If you don't use the authentication method with username and password on your Fritz!Box, leave the username blank.

Methods

Name	Description
connection_status	WAN connection status.
connection_uptime	WAN connection uptime in seconds.
device_uptime	Device uptime in seconds.
device_update	Update state.
downstream_max	Maximum downstream.
downstream_current	Current downstream.
downstream_usage	Current downstream usage.
smart_heatertemperatur	Current temperature of a radiator thermostat. Requires AIN.
smart_socketpower	Current power consumption of a socket switch. Requires AIN.
smart_socketenergy	Total power consumption of the last year of a socket switch. Requires AIN.
smart_status	Current smart device connection status. Requires AIN.
upstream_max	Maximum upstream.
upstream_current	Current upstream.
upstream_usage	Current upstream usage.

Icinga 2 CheckCommand

You can use this predefined Icinga 2 CheckCommand. For more information about CheckCommand objects please refere to the official Icinga 2 documenation.

object CheckCommand "fritz" {
	command = [ CustomPluginDir + "/check_fritz" ]

	arguments += {
		"--hostname" = "$fritz_hostname$"
		"--port" = "$fritz_port$"
		"--username" = "$fritz_username$"
		"--password" = "$fritz_password$"
		"--method" = "$fritz_method$"
		"--warning" = "$fritz_warning$"
		"--critical" = "$fritz_critical$"
		"--index" = "$fritz_index$"
		"--ain" = "$fritz_ain$"
		"--timeout" = "$fritz_timeout$"
		"--modelgroup" = "$fritz_modelgroup$" 
	}

	vars.fritz_hostname = "$address$"
}

Note

This predefined CheckCommand object for Icinga 2 requires a global constants named CustomPluginDir. You can define them in constants.conf in the root Icinga 2 configuration directory. For more information please read the official Icinga 2 documentation about global constants.

Thanks

Thanks to all contributors!

• fdellwing for suggesting the upstream_/downstream_usage functions
• uclara for testing the support for Fritz!Box cable models