You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (dockerd), which is developed as moby/moby is commonly referred to as Docker.
Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code.
The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes.
Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption.
When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN.
Two iptables rules serve to filter incoming VXLAN datagrams with a VNI that corresponds to an encrypted network and discards unencrypted datagrams. The rules are appended to the end of the INPUT filter chain, following any rules that have been previously set by the system administrator. Administrator-set rules take precedence over the rules Moby sets to discard unencrypted VXLAN datagrams, which can potentially admit unencrypted datagrams that should have been discarded.
On Red Hat Enterprise Linux and derivatives such as CentOS and Rocky, the xt_u32 module has been:
These rules are not created when xt_u32 is unavailable, even though the container is still attached to the network.
Impact
Encrypted overlay networks on affected configurations silently accept cleartext VXLAN datagrams that are tagged with the VNI of an encrypted overlay network. As a result, it is possible to inject arbitrary Ethernet frames into the encrypted overlay network by encapsulating them in VXLAN datagrams.
The injection of arbitrary Ethernet frames can enable a Denial of Service attack. A sophisticated attacker may be able to establish a UDP or TCP connection by way of the container’s outbound gateway that would otherwise be blocked by a stateful firewall, or carry out other escalations beyond simple injection by smuggling packets into the overlay network.
Patches
Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16.
Workarounds
Close the VXLAN port (by default, UDP port 4789) to incoming traffic at the Internet boundary (see GHSA-vwm3-crmr-xfxw) to prevent all VXLAN packet injection.
Ensure that the xt_u32 kernel module is available on all nodes of the Swarm cluster.
Background
#43382 partially discussed this concern, but did not consider the security implications.
Mirantis FIELD-5788 essentially duplicates #43382, and was created six months earlier; it similarly overlooked the security implications.
#45118 is the ancestor of the final patches, and was where the security implications were discovered.
The classic builder cache system is prone to cache poisoning if the image is built FROM scratch.
Also, changes to some instructions (most important being HEALTHCHECK and ONBUILD) would not cause a cache miss.
An attacker with the knowledge of the Dockerfile someone is using could poison their cache by making them pull a specially crafted image that would be considered as a valid cache candidate for some build steps.
For example, an attacker could create an image that is considered as a valid cache candidate for:
FROM scratch
MAINTAINER Pawel
when in fact the malicious image used as a cache would be an image built from a different Dockerfile.
In the second case, the attacker could for example substitute a different HEALTCHECK command.
Impact
23.0+ users are only affected if they explicitly opted out of Buildkit (DOCKER_BUILDKIT=0 environment variable) or are using the /build API endpoint (which uses the classic builder by default).
All users on versions older than 23.0 could be impacted. An example could be a CI with a shared cache, or just a regular Docker user pulling a malicious image due to misspelling/typosquatting.
Image build API endpoint (/build) and ImageBuild function from github.com/docker/docker/client is also affected as it the uses classic builder by default.
Patches
Patches are included in Moby releases:
v25.0.2
v24.0.9
v23.0.10
Workarounds
Use --no-cache or use Buildkit if possible (DOCKER_BUILDKIT=1, it's default on 23.0+ assuming that the buildx plugin is installed).
Use Version = types.BuilderBuildKit or NoCache = true in ImageBuildOptions for ImageBuild call.
Unprotected Alternate Channel
Affected range
>=1.12.0 <20.10.24
Fixed version
20.10.24
CVSS Score
6.8
CVSS Vector
CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:H/A:N
Description
Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (dockerd), which is developed as moby/moby is commonly referred to as Docker.
Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code.
The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes.
Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption.
When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN.
The overlay driver dynamically and lazily defines the kernel configuration for the VXLAN network on each node as containers are attached and detached. Routes and encryption parameters are only defined for destination nodes that participate in the network. The iptables rules that prevent encrypted overlay networks from accepting unencrypted packets are not created until a peer is available with which to communicate.
Impact
Encrypted overlay networks silently accept cleartext VXLAN datagrams that are tagged with the VNI of an encrypted overlay network. As a result, it is possible to inject arbitrary Ethernet frames into the encrypted overlay network by encapsulating them in VXLAN datagrams. The implications of this can be quite dire, and GHSA-vwm3-crmr-xfxw should be referenced for a deeper exploration.
Patches
Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16.
Workarounds
In multi-node clusters, deploy a global ‘pause’ container for each encrypted overlay network, on every node. For example, use the registry.k8s.io/pause image and a --mode global service.
For a single-node cluster, do not use overlay networks of any sort. Bridge networks provide the same connectivity on a single node and have no multi-node features.
The Swarm ingress feature is implemented using an overlay network, but can be disabled by publishing ports in host mode instead of ingress mode (allowing the use of an external load balancer), and removing the ingress network.
If encrypted overlay networks are in exclusive use, block UDP port 4789 from traffic that has not been validated by IPSec. For example, iptables -A INPUT -m udp —-dport 4789 -m policy --dir in --pol none -j DROP.
Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (dockerd), which is developed as moby/moby is commonly referred to as Docker.
Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code.
The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes.
Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption.
When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN.
An iptables rule designates outgoing VXLAN datagrams with a VNI that corresponds to an encrypted overlay network for IPsec encapsulation.
On Red Hat Enterprise Linux and derivatives such as CentOS and Rocky, the xt_u32 module has been:
This rule is not created when xt_u32 is unavailable, even though the container is still attached to the network.
Impact
Encrypted overlay networks on affected platforms silently transmit unencrypted data. As a result, overlay networks may appear to be functional, passing traffic as expected, but without any of the expected confidentiality or data integrity guarantees.
It is possible for an attacker sitting in a trusted position on the network to read all of the application traffic that is moving across the overlay network, resulting in unexpected secrets or user data disclosure. Thus, because many database protocols, internal APIs, etc. are not protected by a second layer of encryption, a user may rely on Swarm encrypted overlay networks to provide confidentiality, which due to this vulnerability is no longer guaranteed.
Patches
Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16.
Workarounds
Close the VXLAN port (by default, UDP port 4789) to outgoing traffic at the Internet boundary (see GHSA-vwm3-crmr-xfxw) in order to prevent unintentionally leaking unencrypted traffic over the Internet.
Ensure that the xt_u32 kernel module is available on all nodes of the Swarm cluster.
Background
#43382 partially discussed this concern, but did not consider the security implications.
Mirantis FIELD-5788 essentially duplicates #43382, and was created six months earlier; it similarly overlooked the security implications.
#45118 is the ancestor of the final patches, and was where the security implications were discovered.
Moby is an open source container framework originally developed by Docker Inc. as Docker. It is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. As a batteries-included container runtime, Moby comes with a built-in networking implementation that enables communication between containers, and between containers and external resources.
Moby's networking implementation allows for creating and using many networks, each with their own subnet and gateway. This feature is frequently referred to as custom networks, as each network can have a different driver, set of parameters, and thus behaviors. When creating a network, the --internal flag is used to designate a network as internal. The internal attribute in a docker-compose.yml file may also be used to mark a network internal, and other API clients may specify the internal parameter as well.
When containers with networking are created, they are assigned unique network interfaces and IP addresses (typically from a non-routable RFC 1918 subnet). The root network namespace (hereafter referred to as the 'host') serves as a router for non-internal networks, with a gateway IP that provides SNAT/DNAT to/from container IPs.
Containers on an internal network may communicate between each other, but are precluded from communicating with any networks the host has access to (LAN or WAN) as no default route is configured, and firewall rules are set up to drop all outgoing traffic. Communication with the gateway IP address (and thus appropriately configured host services) is possible, and the host may communicate with any container IP directly.
In addition to configuring the Linux kernel's various networking features to enable container networking, dockerd directly provides some services to container networks. Principal among these is serving as a resolver, enabling service discovery (looking up other containers on the network by name), and resolution of names from an upstream resolver.
When a DNS request for a name that does not correspond to a container is received, the request is forwarded to the configured upstream resolver (by default, the host's configured resolver). This request is made from the container network namespace: the level of access and routing of traffic is the same as if the request was made by the container itself.
As a consequence of this design, containers solely attached to internal network(s) will be unable to resolve names using the upstream resolver, as the container itself is unable to communicate with that nameserver. Only the names of containers also attached to the internal network are able to be resolved.
Many systems will run a local forwarding DNS resolver, typically present on a loopback address (127.0.0.0/8), such as systemd-resolved or dnsmasq. Common loopback address examples include 127.0.0.1 or 127.0.0.53. As the host and any containers have separate loopback devices, a consequence of the design described above is that containers are unable to resolve names from the host's configured resolver, as they cannot reach these addresses on the host loopback device.
To bridge this gap, and to allow containers to properly resolve names even when a local forwarding resolver is used on a loopback address, dockerd will detect this scenario and instead forward DNS requests from the host/root network namespace. The loopback resolver will then forward the requests to its configured upstream resolvers, as expected.
Impact
Because dockerd will forward DNS requests to the host loopback device, bypassing the container network namespace's normal routing semantics entirely, internal networks can unexpectedly forward DNS requests to an external nameserver.
By registering a domain for which they control the authoritative nameservers, an attacker could arrange for a compromised container to exfiltrate data by encoding it in DNS queries that will eventually be answered by their nameservers. For example, if the domain evil.example was registered, the authoritative nameserver(s) for that domain could (eventually and indirectly) receive a request for this-is-a-secret.evil.example.
Docker Desktop is not affected, as Docker Desktop always runs an internal resolver on a RFC 1918 address.
Patches
Moby releases 26.0.0-rc3, 25.0.5 (released) and 23.0.11 (to be released) are patched to prevent forwarding DNS requests from internal networks.
Workarounds
Run containers intended to be solely attached to internal networks with a custom upstream address (--dns argument to docker run, or API equivalent), which will force all upstream DNS queries to be resolved from the container network namespace.
Background
yair zak originally reported this issue to the Docker security team.
The official documentation claims that "the --internal flag that will completely isolate containers on a network from any communications external to that network," which necessitated this advisory and CVE.
Affected range
<20.10.27
Fixed version
24.0.7
Description
Intel's RAPL (Running Average Power Limit) feature, introduced by the Sandy Bridge microarchitecture, provides software insights into hardware energy consumption. To facilitate this, Intel introduced the powercap framework in Linux kernel 3.13, which reads values via relevant MSRs (model specific registers) and provides unprivileged userspace access via sysfs. As RAPL is an interface to access a hardware feature, it is only available when running on bare metal with the module compiled into the kernel.
By 2019, it was realized that in some cases unprivileged access to RAPL readings could be exploited as a power-based side-channel against security features including AES-NI (potentially inside a SGX enclave) and KASLR (kernel address space layout randomization). Also known as the PLATYPUS attack, Intel assigned CVE-2020-8694 and CVE-2020-8695, and AMD assigned CVE-2020-12912.
Several mitigations were applied; Intel reduced the sampling resolution via a microcode update, and the Linux kernel prevents access by non-root users since 5.10. However, this kernel-based mitigation does not apply to many container-based scenarios:
Unless using user namespaces, root inside a container has the same level of privilege as root outside the container, but with a slightly more narrow view of the system
sysfs is mounted inside containers read-only; however only read access is needed to carry out this attack on an unpatched CPU
While this is not a direct vulnerability in container runtimes, defense in depth and safe defaults are valuable and preferred, especially as this poses a risk to multi-tenant container environments running directly on affected hardware. This is provided by masking /sys/devices/virtual/powercap in the default mount configuration, and adding an additional set of rules to deny it in the default AppArmor profile.
While sysfs is not the only way to read from the RAPL subsystem, other ways of accessing it require additional capabilities such as CAP_SYS_RAWIO which is not available to containers by default, or perf paranoia level less than 1, which is a non-default kernel tunable.
OWASP Top Ten 2017 Category A9 - Using Components with Known Vulnerabilities
Affected range
<20.10.27
Fixed version
v24.0.7
Description
Intel's RAPL (Running Average Power Limit) feature, introduced by the Sandy Bridge microarchitecture, provides software insights into hardware energy consumption. To facilitate this, Intel introduced the powercap framework in Linux kernel 3.13, which reads values via relevant MSRs (model specific registers) and provides unprivileged userspace access via sysfs.
github.com/aws/aws-sdk-go1.51.32 (golang)
pkg:golang/github.com/aws/aws-sdk-go@1.51.32
Affected range
>=0
Fixed version
Not Fixed
Description
The Go AWS S3 Crypto SDK contains vulnerabilities that can permit an attacker with write access to a bucket to decrypt files in that bucket.
Files encrypted by the V1 EncryptionClient using either the AES-CBC content cipher or the KMS key wrap algorithm are vulnerable. Users should migrate to the V1 EncryptionClientV2 API, which will not create vulnerable files. Old files will remain vulnerable until re-encrypted with the new client.
Affected range
>=0
Fixed version
Not Fixed
Description
The Go AWS S3 Crypto SDK contains vulnerabilities that can permit an attacker with write access to a bucket to decrypt files in that bucket.
Files encrypted by the V1 EncryptionClient using either the AES-CBC content cipher or the KMS key wrap algorithm are vulnerable. Users should migrate to the V1 EncryptionClientV2 API, which will not create vulnerable files. Old files will remain vulnerable until re-encrypted with the new client.
stdlib1.22.1 (golang)
pkg:golang/stdlib@1.22.1
Affected range
>=1.22.0-0 <1.22.4
Fixed version
1.22.4
Description
The various Is methods (IsPrivate, IsLoopback, etc) did not work as expected for IPv4-mapped IPv6 addresses, returning false for addresses which would return true in their traditional IPv4 forms.
Affected range
>=1.22.0-0 <1.22.4
Fixed version
1.22.4
Description
The archive/zip package's handling of certain types of invalid zip files differs from the behavior of most zip implementations. This misalignment could be exploited to create an zip file with contents that vary depending on the implementation reading the file. The archive/zip package now rejects files containing these errors.
Affected range
>=1.22.0-0 <1.22.3
Fixed version
1.22.3
Description
A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop.
Affected range
>=1.22.0-0 <1.22.2
Fixed version
1.22.2
Description
An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames.
Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed.
This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send.
The fix sets a limit on the amount of excess header frames we will process before closing a connection.
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This PR contains the following updates:
0.5.0->0.5.1Warning
Some dependencies could not be looked up. Check the Dependency Dashboard for more information.
Release Notes
ContainerSSH/ContainerSSH (ContainerSSH/ContainerSSH)
v0.5.1Compare Source
Changelog
340ae99Bump libcontainerssh version to 0.5.1Configuration
📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).
🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.
♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.
🔕 Ignore: Close this PR and you won't be reminded about this update again.
This PR has been generated by Renovate Bot.