3D printing files for SENĆOŦEN language
Cookie Cutter: Defualt they are 10mm in height but I found making them 15 may create better shapes with the playdough. This should be a fairly easy edit, either with modeling software or printing software by increasing height.
SVG: SVG files for each letter
cura plans: letters with joins are built using a raft for easier removal than a brim. letters without joins are printed using a PVA brim for easy removal. raftVowelsX4.3mf creats 4 copies of joned vowels for a cura buildplate. raftconstanants.3mf is a cura file that has 1 set of constanants for a cura buildplate. the numbered files are the 3 files layed out for the non joined. Settings are 0.2 layer height, no supports needed, PVA brim (3-5mm width), 10% infill. The frequency is as followed: 4 of E, A, Á, S, I, ,Í , Ⱥ, Ś, Ṯ, N, L and 2 of every other letter.
blocks: blocks are defaulted to a height of 60mm but the prefered printing size is 37.5mm. Use uniformed scaling to shrink it to the appropriate size. PVA supports prevent sag and easy post processing.
stl letters: letters made from SVG files. see join information for instructions on how to align letters with joins.