Clone the fork of Loboris Micropython repository, this repository has been updated to allow PUT command to work with microWebSrv and fix for microWebSocket based on this branch and latest update from Loboris master branch
$ git clone https://github.com/ariestiyansyah/MicroPython_ESP32_psRAM_LoBo.git
Config the micropython and build the Firmware
$ cd MicroPython_ESP32_psRAM_LoBo/MicroPython_BUILD/
$ ./BUILD.sh menuconfig
$ ./BUILD.sh
Flash it This example using SparkFun ESP32 Thing on Mac
$ ./BUILD.sh --port /dev/tty.usbserial-DN03F9EP flash
SparkFun connected to my mac using /dev/tty.usbserial-DN03F9EP port, this will be
different on each device, check it using following command
$ ls /dev/tty.usbserial*
Follow instruction from https://github.com/mozilla-iot/gateway/blob/master/README.md to install Mozilla Gateway in your Raspberry Pi or PC/Mac.
Clone project
$ git clone https://github.com/valutac/vanessa.git
change variable SSID and PASSWORD value in config.py with wifi credentials, for example
SSID = 'vanessa'
PASSWORD = 'wot'
Sync local files to ESP32 by using rshell, you can also use ampy :) mine is rhsell.
$ rshell -a --buffer-size=30 -p /dev/tty.usbserial-DN03F9EP
fitra> rsync -v . /flash
fitra> repl
>>> Control-D # Soft reset
TO DO