This README file contains information on the contents of the
via-vab820-bsp layer.

Please see the corresponding sections below for details.


Dependencies
============

This layer depends on:

  URI: git://git.openembedded.org/bitbake
  branch: master

  URI: git://git.openembedded.org/openembedded-core
  layers: meta
  branch: dora

  URI: git://git.openembedded.org/meta-openembedded
  branch: dora

  URI: git://git.yoctoproject.org/meta-fsl-arm
  branch: dora

  URI: git://github.com/Freescale/fsl-community-bsp-base
  branch: dora

  URI: git://git.yoctoproject.org/meta-fsl-arm-extra
  branch: dora

  URI: git://git.yoctoproject.org/meta-fsl-demos
  branch: dora

  URI: git://git.freescale.com/imx/meta-fsl-bsp-release
  branch: dora_3.10.17-1.0.0_GA

  URI: git://github.com/OSSystems/meta-browser
  branch: dora


Table of Contents
=================

  I. Adding the vab820 layer to your build
  II. Building the official BSP


I. Adding the vab820 layer to your build
=================================================

In order to use this layer, you need to make the build system aware of
it.

Assuming the vab820 layer exists at the top-level of your
yocto build tree, you can add it to the build system by adding the
location of the vab820 layer to bblayers.conf, along with any
other layers needed. e.g.:

  BBLAYERS ?= " \
    /path/to/yocto/meta \
    /path/to/yocto/meta-yocto \
    /path/to/yocto/meta-yocto-bsp \
    /path/to/yocto/meta-via-vab820-bsp \
    "

II. Building the official BSP
=================================================

To easily build the official BSP (`via-image-x11`) without much
manual setup, need to utilize the platform image from here:

  URI: https://github.com/viaembedded/via-vab820-bsp-platform
  branch: dora

Build instructions, including pulling the appropriate repositories
is provided in the README there.