skynet_yun

Skynet support for the Arduino Yun.

http://skynet.im

Before you can use this you have to first update the yun system image and install node using the instructions below.

INSTALL INSTRUCTIONS:

1. Update the Yun Openwrt image. http://arduino.cc/en/Tutorial/YunSysupgrade
2. Expand the Yun disk space to an sd card. http://arduino.cc/en/Tutorial/ExpandingYunDiskSpace
3. Run the following commands;

• opkg update
• opkg install node
• opkg install node-serialport
• opkg install node-socket.io-client

4. Comment out the last line in /etc/innittab and reboot.
5. You can't git clone on the yun, so instead use another computer to move this repo to the sd card.
6. Run node skynet_yun.js
7. Once it connects and authenticates you can send it messages from skynet and it'll push it to the serial port.

Arduino LED strip Code:

Wire your yun up to an LED strip (in this case I used an LPD6803 strip)

Download and Install Libraries: https://github.com/neophob/LPD6803-RGB-Pixels https://code.google.com/p/arduino-timerone/downloads/list

Once you have the libraries installed, program the Arduino Yun with the yunLed code. Send it a payload that contains just an integer of 0,1,2, or 3.

• msg.payload = 0; -> ColorWipe - Blue
• msg.payload = 1; -> ColorWipe - Green
• msg.payload = 2; -> KnightRider - Red
• msg.payload = 3; -> KnightRider - Blue