Skip to content

Little 3D printed arduino SMARS (Screwless Modular Assembleable Robotic System) robot with UltraSonic attachment and code. This is a nice little project do due with your gild, or to give as a gift. It introduces to robotcs and the Arduino system quite entertainingly. Attachements are available from the creator's website (SMARS modular robot).

License

Notifications You must be signed in to change notification settings

wlwatkins/SMARS-Robot

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

22 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SMARS-Robot

Little 3D printed arduino SMARS (Screwless Modular Assembleable Robotic System) robot with UltraSonic attachment and code. This is a nice little project do due with your gild, or to give as a gift. It introduces to robotcs and the Arduino system quite entertainingly. Attachements are available from the creator's website (SMARS modular robot).

Video Demonstration

SMARS_Robot_video

Installation

To program the Arduino Uno, you need the Arduino IDE, so download and install that. Once this is done, you need the Ultrasonic Library by Erick Simões. Below is a copy and past of his installation instructions:

  • Click in Sketch > Include Library > Manage Libraries...;
  • In the search field type: ultrasonic;
  • In the list, look for Ultrasonic by Erick Simões;
  • Click on Install.

Once this is done, open the smars_us.ino in the Arduino IDE. Don't forget to select the correct board in Tools -> Boards. and hit Upload.

Understanding the script

The default script makes the robot look if it is 5cm away from an obstacle. If not it moves forwards otherwise it rotates anticlockwise. You may easily modify the minimum distance, the forward delay (delay between the time the motors are brought to speed and the time they are stopped) and the rotation delay (similar to forward delay but with the rotation function).

#define minDistance 5
#define delayForwards 1000
#define delayRotate 5
#define delayLoop 100

3D Printing

They are a couple parts to print for this project. I used a CREALITY 10, but the choice is up to you. The print is quite long (> 1 full day). You should print them saperatly. I used PLA with a bed heated at 60°C and a extruder at 200°C.

  • First the chassie.
    - Layer Height: 0.16mm
    - Infill: 40%
    - Support (only from bottom) : ON
    - Adhesion layer : ON
    - Time: >6h
    
  • Mechanical tracks (2 are in the file) & Holding boards x 20:
     - Layer Height: 0.16mm
     - Infill: 60%
     - Support (only from bottom) : OFF
     - Adhesion layer : ON
     - Time: >6h
    
  • Holding boards x 12:
     - Layer Height: 0.16mm
     - Infill: 60%
     - Support (only from bottom) : OFF
     - Adhesion layer : ON
     - Time: >3h
    
  • Slave and master wheels x2 (each): You need to rotate the master wheels upside down (That is with the part through which the motor goes ontop)
     - Layer Height: 0.16mm
     - Infill: 40%
     - Support (only from bottom) : ON
     - Adhesion layer : ON
     - Time: >6h
    
  • Ultrasonic connectors (3parts in total):
     - Layer Height: 0.16mm
     - Infill: 40%
     - Support (only from bottom) : OFF
     - Adhesion layer : ON
     - Time: >4h
    

To connect the mechanical tracks together, just use the 3D printer's filament. To connect the DC motors to the wheels, insert them in the chassie, and use hot glue keeping in mind, you do not want to hot glue the wheel to the chassie, but only to the DC motor.

Electronic parts list*

CREDIT where credit is due

*affleliated links.

About

Little 3D printed arduino SMARS (Screwless Modular Assembleable Robotic System) robot with UltraSonic attachment and code. This is a nice little project do due with your gild, or to give as a gift. It introduces to robotcs and the Arduino system quite entertainingly. Attachements are available from the creator's website (SMARS modular robot).

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages