Requires a build with BLE and Berry (ESP32 devices only).
To use:
- Upload
blerry.be,blerry_main.be, and eachblerry_model_xxxx.bemodel driver file you may need to the file system of the ESP32. - Edit
blerry.beas needed for your device configuration, HA discovery choices, etc... (make sure you delete the example configurations for devices you are not using). - Create and enable (
Rule1 1) the following Tasmota Rule and Restart Tasmota (Some of the commands used inblerry.beare not initialized by the timeautoexec.beis run. So, you must loadblerry.beas part of a rule.)
Rule1 ON System#Boot DO br load('blerry.be') ENDON
If you use HA discovery, devices should appear under MQTT Devices NOT the Tasmota integration.
- Make sure BLE is enabled with
SetOption115 1 - Ensure your rule with
ON System#Boot DO br load('blerry.be') ENDONis enabled. If you usedRule1as described above, you enable it withRule1 1in the console. - Delete the example devices in
user_config. - Ensure your aliases are 20 characters or less (Tasmota default limit).
- Try your
user_configdefinition in the Berry Scripting Console (Consoles -> Berry Scripting console). Look for extra or missing commas, extra or missing', extra or missing{or}. Troubleshooting in the console will save a lot of time restarting Tasmota. - Enable a higher weblog level when restarting (
Weblog 4thenRestart 1) to watch for errors during boot. - Try loading Blerry just in the console with
br load('blerry.be')and watch the logs for errors. - Hop in the #blerry thread in the #tasmota channel of Digiblur's discord.
| Model String | Mac Example | Description |
|---|---|---|
'ATCpvvx' |
'A4C138XXXXXX' |
Xiaomi sensors on ATC or pvvx firmware with "ATC1441" or "Custom" advertisement. |
'ATCmi' |
'A4C138XXXXXX' |
Xiaomi sensors on ATC or pvvx firmware with "Mi" advertisement. |
'GVH5075' |
'A4C138XXXXXX' |
Govee H5072 and H5075. |
'GVH5182' |
'C33130XXXXXX/1' |
Govee H5182 two probe meat thermometer with display. Thanks carlthehaitian! |
'GVH5183' |
'A4C138XXXXXX' |
Govee H5183 single probe meat thermometer. |
'GVH5184' |
'D03232XXXXXX/1' |
Govee H5184 four probe meat thermometer with display. Thanks ElksInNC! |
'IBSTH2' |
'494208XXXXXX' |
Inkbird IBSTH1 & IBSTH2 with and without humidity. |
'WoSensorTH' |
'D4E4A3XXXXXX/1' |
Switchbot temperature and humidity sensor. |
'WoContact' |
'D4BD28XXXXXX/1' |
Switchbot contact sensor (also has motion, binary lux, and a button). |
'WoPresence' |
'FC7CADXXXXXX/1' |
Switchbot motion sensor (also has binary lux). |
I have the following devices that I am seeking to support:
- Switchbot Bot (this will be the first controllable device added to Blerry. I am still working on how I want to deal with it)
- Switchbot Curtain
- Switchbot Remote
- SP611E (LED Controller)
I do not have the following devices but would like to support them as they have been discussed in Digiblur's Discord.
- Govee H5074
- Some BBQ sensors
Feature Wish-List
- Sensor calibration, establish general method.
- Redo precision method to be consistent with a developed calibration method.
- A
blerry_model_dev.bedriver which spits out parsed, useful information to MQTT / a starting point for driver development.
Feel free to fork and PR any new drivers, better code, etc.!
I have added a document with some of the process for supporting the Govee H5183.
