Core CPU Module based on ATSAMD21G18. This module can be purchased on Xinabox CC.
This xChip forms part of the core modules. The SAM D21 is a series of low-power micro-controllers using the 32-bit ARM® Cortex® M0+ processor.
The CS11 xChip is housed in an extremely compact 2U×2U xChip with four connection ports.
- Follow the instructions for programming the Arduino Zero
- You need an IP02 (A/B in B position) or IP03 to program the CS11
- Connect the CS11 to the IP0x using a small connector for USB and a big connector for power.
- Plug the circuit into your USB port on your computer.
| Description | Arduino Pin # |
|---|---|
| SD Card - CS | 3 |
| RGB LED Red | 11 |
| RGB LED Green | 12 |
| RGB LED Blue | 13 |