Skip to content

xinsnake/xbgw-app

 
 

Repository files navigation

XBee Gateway App

The XBee Gateway App is a Python application that runs on the Digi XBee Gateway and uses its API to connect your XBee modules to Device Cloud. This application is loaded by default on XBee Gateway.

This source has been contributed by Digi International. This is a RELEASE software release which has been fully QA-tested and supported by Digi International.

Requirements and Setup

The XBee Gateway Python application requires the use of Python 2.7.

The provided build and deployment scripts depend on a POSIX-compatible shell environment, as well as the following tools: ssh, scp, curl, tar and zip. If you are developing on Windows, you will need to use Cygwin with the openssh package installed.

  1. Ensure Python 2.7 is installed. (If using Cygwin on Windows, install the python package using the Cygwin setup utility.)

  2. Clone this Git repository, or download the code using the Download button above.

  3. Run the provided unit tests; this will serve to check that your system is ready to build and deploy the application.

    $ ./test.sh
    ...
    (output truncated)
    ...
    ----------------------------------------------------------------------
    Ran 157 tests in 0.548s
    
    OK
    
  4. (Optional) Deploy the application onto an XBee Gateway. Replace <ipaddr> below with the IP address of the XBee Gateway.

    $ ./deploy.sh <ipaddr>
    

    This will byte-compile the code, copy it onto the gateway, and start the application. You will see output similar to this:

    Aug  4 19:44:06 (none) local7.info pylog: 2014-08-04 19:44:06,804 INFO root: XBGW App Version: 1.1.0b2
    Aug  4 19:44:06 (none) local7.info pylog: 2014-08-04 19:44:06,860 INFO xbgw.xbee.manager: Initializing XBeeEventManager
    Aug  4 19:44:06 (none) local7.info pylog: 2014-08-04 19:44:06,934 INFO xbgw.xbee.ddo_manager: Initializing DDOEventManager
    Aug  4 19:44:07 (none) local7.info pylog: 2014-08-04 19:44:07,030 INFO xbgw.reporting.device_cloud: Initializing DeviceCloudReporter
    Aug  4 19:44:07 (none) local7.info pylog: 2014-08-04 19:44:07,072 INFO xbgw.command.rci: RCICommandProcessor initialized
    

Application Design

Built on asyncore

The XBee Gateway App is built primarily on Python's asyncore module.

The XBee Gateway App uses asyncore to handle communication with XBee sockets in Python. Instead of needing to write a loop to poll/select on the sockets, we just need to create a few asyncore.dispatcher objects to take care of reading and processing data from the sockets. See the DDOEventManager class in xbgw/xbee/ddo_manager.py for an example of this.

Built on PyPubSub

The XBee Gateway App also uses the Python PubSub library to send messages and data between different parts of the app.

The Pubsub package provides a publish - subscribe Python API that facilitates event-based programming. Using the publish - subscribe pattern in your application can dramatically simplify its design and improve testability.

Application Components

The XBee Gateway App is designed with two main types of components: event managers, and reporters.

Event Managers

An "event manager" in the XBee Gateway App is a component that takes input from outside of the application (for example, RCI commands or XBee socket messages), processes that input in some way, and sends information to the rest of the application using PubSub messages.

Examples of event managers in the app are:

  • XBee socket managers (see manager.py and ddo_manager.py)
  • RCI command listeners, such as the XBee socket managers (which implement the "send_serial" and "set_digital_output" commands) and various example commands.

Event managers are typically implemented to be entirely asynchronous, but depending on the needs of an application, an event manager could run on its own thread and thus have a synchronous/blocking implementation.

Reporters

A "reporter" in the XBee Gateway App is a component that takes input from within the application (via PubSub messages) and transmits data to the outside world, e.g. to a cloud service such as Digi Device Cloud.

Depending on the application needs (and the means of communicating with external services), reporters can be implemented either asynchronously (e.g. using an asyncore dispatcher) or using a background thread.

The only reporter currently implemented is the Device Cloud reporter, which uploads messages to Digi Device Cloud as data points.

RCI Command Processing

See the docstring at the top of the rci.py module for information on how RCI commands are made available to the application. You may also refer to the provided debug commands for simple examples of RCI command implementations.

Application Settings

The behavior of the XBee Gateway App can be configured using settings stored in xbgw_settings.json. This file is parsed and converted into the Settings Registry. Application components can "register" themselves with this Settings Registry to specify their own configuration values which can be overridden by the settings file.

See xbgw/debug/settings_example.py for a small example of an application component which uses the settings registry. You can also refer to the XBeeEventManager class (found here) for an example of real code using multiple settings.

The default settings for the application are as follows:

  • Device Cloud ("devicecloud"):
    • "encode serial": true. If set to true, received serial data will be converted to base64 encoding before upload to Device Cloud. base64 encoding of data avoids issues with whitespace, commas, and newline characters in data
  • XBee event manager ("xbee_manager"):
    • "filter_analog_duplicates": true. If set to true, the application will remember past analog samples from each XBee and ignore samples when they match the previous value.
    • "minimum_analog_change": 1. This setting is used when "filter_analog_duplicates" is set to true. This specifies the minimum amount by which an analog value must change from the previous reported sample before reporting a new value.
    • "filter_digital_duplicates": 1. If set to true, the application will remember past digital I/O values from each XBee and ignore a pin's value when it matches the previous value.

Running the App

The starting point of the XBee Gateway App is in the xbgw_main.py script.

xbgw_main.py imports and initializes the various components of the application, sets up message subscriptions for the Device Cloud reporter, and kicks off the main asyncore loop call.

Since the main thread is occupied with the asyncore.loop() call, any background processing or data uploads must either be implemented using asyncore (as with the XBee socket managers), or using a background thread (as with the Device Cloud reporter).

License

This software is open-source software. Copyright Digi International Inc., 2016.

This Source Code form is subject to the terms of the Mozilla Public License, v. 2.0. If a copy of the MPL was not distributed with this file, you can obtain one at http://mozilla.org/MPL/2.0/.

About

XBee Gateway Python Application

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 96.2%
  • Shell 3.8%