Zehnder Comfoair Q ESPHome

This project lets you use an ESP32 device with a CAN interface to interact with the Zehnder ComfoAir Q ventilation unit. Tested with:

• Olimex ESP32-EVB-EA-IND using its internal CAN bus component + separate power supply
• M5Stack AtomS3 Lite with Mini CAN Unit (TJA1051T/3) feeding off the 12V supply of the ventilation unit

It exposes all known information and airflow control through the ESPHome native API, and allows you to integrate the unit in Home Assistant as depicted below:

You can find the configuration YAML files in the docs folder.

Untested but might also work on an ESP8266 with an MCP2551 (untested).

Needs at least ESPHome 2022.5.0 (since it depends on some CAN bus component updates).

Hardware

See specific guides for each device:

• Olimex ESP32-EVB
• M5Stack AtomS3 Lite
• Example ESP32 alternative (see diagram)

Software

1. Copy and rename secrets.yaml.example to secrets.yaml and update it with your WiFi credentials (wifi_ssid and wifi_password).

2. Build the image with ESPHome

make compile

3. Upload/flash the firmware to the board.

make upload

By default the project builds for the AtomS3 board. To change your board, you can specify the BOARD parameter. For example for the Olimex ESP32-EVB:

make compile BOARD=esp32-evb
make upload BOARD=esp32-evb

Now when you go to the Home Assistant “Integrations” screen (under “Configuration” panel), you should see the ESPHome device show up in the discovered section (although this can take up to 5 minutes). Alternatively, you can manually add the device by clicking “CONFIGURE” on the ESPHome integration and entering “<NODE_NAME>.local” as the host.

Optional: for the ventilation card with the arrows, see docs/home-assistant/example-picture-elements-card.yaml

Credits

Based on the original repo: https://github.com/felixstorm/esphome-custom-components

Inspired by

• https://github.com/vekexasia/comfoair-esp32
• https://github.com/michaelarnauts/aiocomfoconnect
• https://github.com/mat3u/comfoair-esp32
• https://github.com/hcouplet/comfoair-esp32

A lot of this repo was inspired by the reverse engineering here.

• ComfoControl Protocol
• RMI PROTOCOL
• PDO PROTOCOL